BanL
(BanL)
October 15, 2016, 3:37pm
216
pilotdog68
(pilotdog68)
October 15, 2016, 4:47pm
217
Thanks, seem to be good prices
Jerommel
(Jerommel)
October 15, 2016, 5:10pm
218
Anything 90+ CRI would sell like cake.
We’re all waiting for Cree XP-G3 high CRI and Nichia 219C high CRI, aren’t we?
khas
(khas)
October 15, 2016, 5:28pm
219
Very nice selection of XHP35 LEDs. The prices look good
Cree XHP35 HI D4 50E Neutral White 5000K LED sold out already :weary:
http://www.kaidomain.com/p/S026091.Cree-XHP35-HI-D4-50E-Neutral-White-5000K-LED-Emitter
Rolz
(Rolz)
October 15, 2016, 8:04pm
220
Some new compact flashlights “KDLIGHT S24-HI”.
All are 18650 battery powered flashlights with a fixed 3 Mode setting and rated at 1100 lumen output.
Hi : Digital Regulated 3040mA Current Output
Med : Digital Regulated 1000mA Current Output
Lo: Digital Regulated 5mA Current Output
KDLIGHT S24-HI Cree XP-L HI V3 White 6500K $22.68
http://www.kaidomain.com/p/S025765.KDLIGHT-S24-HI-Cree-XP-L-HI-V3-White-6500K-1100-Lumens-3-Mode-LED-Flashlight-Silver-Grey
KDLIGHT S24-HI Cree XP-L HI V2 Neutral White 4500K $22.68
http://www.kaidomain.com/p/S025766.KDLIGHT-S24-HI-Cree-XP-L-HI-V2-Neutral-White-4500K-1100-Lumens-3-Mode-LED-Flashlight-Silver-Grey
KDLIGHT S24-HI Cree XP-L HI U4 Warm White 3000K $23.49
http://www.kaidomain.com/p/S025767.KDLIGHT-S24-HI-Cree-XP-L-HI-U4-Warm-White-3000K-1100-Lumens-3-Mode-LED-Flashlight-Silver-Grey
Barkuti
(Barkuti)
October 15, 2016, 11:48pm
221
Rolz:
Some new compact flashlights “KDLIGHT S24-HI”.
All are 18650 battery powered flashlights with a fixed 3 Mode setting and rated at 1100 lumen output.
Hi : Digital Regulated 3040mA Current Output
Med : Digital Regulated 1000mA Current Output
Lo: Digital Regulated 5mA Current Output
…
KDLIGHT S24-HI Cree XP-L HI U4 Warm White 3000K $23.49
Well, considering that torch is more than probably using this
Cree XP-L HI U4 7A2 3000K-3500K LED , which is an H (80+) CRI bin emitter, looks great to me. On my wishlist.
Cheers ^:)
BanL
(BanL)
October 16, 2016, 6:18am
222
Hi friend
I had added the new stocks.
Thanks
Ban
khas
(khas)
October 16, 2016, 4:37pm
223
Thank you very much order placed :+1:
Barkuti
(Barkuti)
October 16, 2016, 7:25pm
224
“H” (80+) CRI bin spec: Cree XHP35 HD D4 50E White 5000K LED Emitter
“50E” cromaticity coordinates: 0'3447x, 0'3553y. In the very middle point of the 3s in the chromaticity chart. Ought to look pretty nice.
Cheers ^:)
Original post date: Sun, 10/16/2016 - 19:39; pics scaled down a bit. :-)
Jerommel
(Jerommel)
October 16, 2016, 7:09pm
225
pilotdog68:
Just noticed these, great product to have! Now it would be good to start selling some of the most popular emitters already soldered to them
edit: just noticed that you already sell them mounted! I never saw them because I only search under “LED emitters” and not under LED stars
Yes, the site could use some improvement there i.m.o.
It’s easy to overlook the LEDs on stars.
hank
(hank)
October 16, 2016, 7:18pm
226
“LED stars” doesn’t find them either! Could you post a link to the mounted ones?
Jerommel
(Jerommel)
October 16, 2016, 7:19pm
227
giorgoskok
(giorgoskok)
October 22, 2016, 2:23pm
228
Pablo_E
(Pablo E.)
October 23, 2016, 12:01pm
229
Comparing with aluminium triple mcpcb pictures, copper ones seem to have DTP pads.
hank
(hank)
October 25, 2016, 2:07pm
230
I hope KD will restock on the solid pills that fit SK68s
http://www.kaidomain.com/p/S024894.DIY-20_8mm(D)x16mm(H)-Aluminium-Driver-Pillar-Set-for-LED-Flashlights-1pc
I bought the last one (sigh)
They’re still available wholesale through Ali, just search for
20.8mm(D)x16mm(H)-Aluminium-Driver-Pillar
But minimum quantity 10, and they offer shipload prices dirt cheap too. But shipping cost adds up too fast.
Need a retailer.
leaftye
(leaftye)
October 25, 2016, 3:06pm
231
http://kaidomain.com/p/S026105.KDLIGHT-BL70s-Cree-XHP70-Neutral-White-4000K-3500-Lumens-4-Mode-LED-Bike-Light-Black
XHP70 bike light. A mountain biker community asked for it to be reprogrammed to hide the blinky modes and reverse the mode order. KD released this revised version with those changes, plus an AR lens.
Missed that BanL is here too. Good job BanL!
Jerommel
(Jerommel)
October 25, 2016, 2:15pm
232
Certainly looks like it.
Splendid deal i.m.o. :+1:
Barkuti
(Barkuti)
October 25, 2016, 2:53pm
233
Check this out hank :
DIY 21mm(D) x 14mm(H) Aluminium Driver Pillar Set for LED Flashlights @Kaidomain
Same actual height than my disemboweled SK68 clones. It's missing the o-ring slit, though. :(
Cheers ^:)
hank
(hank)
October 25, 2016, 3:57pm
234
Huh. Thanks. That’s confusing.
This one, that’s out of stock (with O-ring in groove for zoomie))
S024894
DIY 20.8mm(D) x 16mm(H) Aluminium Driver Pillar Set for LED Flashlights (1 pc)
Thread spacing 18.1x1mm
And this one — without the O-ring groove — so how do you make the zoom work? How does it feel/behave/slide/hold setting?
Just stuff a thicker O-ring in above the threads?
S024893
DIY 21mm(D) x 14mm(H) Aluminium Driver Pillar Set for LED Flashlights (1 pc)
thread spacing 19.6x1mm
Barkuti
(Barkuti)
October 25, 2016, 3:35pm
235
The two (hollow) pills I have from my clones have different threading, therefore bodies and pills lego do not.
No caliper at hand, sorry. I may take another look at the threads later.
Cheers ^:)