Active again: Nichia 219CT 4000K R9050 high CRI LED (and some trits)

148 posts / 0 new
Last post

Pages

WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.
Active again: Nichia 219CT 4000K R9050 high CRI LED (and some trits)

Nichia 219CT 4000K R9050 high CRI LED
It is used in the ReyLight Pineapple, and Ti LAN.
I was requested by a few members to sell bare emitters.

4$/pc, free shipping with tracking number, paypal is 395090663@qq.com
Order 10 pcs or more, 3$/pc.
If possible, pls send it as gift and pm me your shipping address.

Some trits:

1.5*6mm trit, 6$/pc
white-18pcs
pink-20pcs
green-20pcs
ice blue-25pcs

A few old drivers available. 3$/pc (2K HZ PWM)
0.9~4.2V input
Reverse protection
14.6mm dia
5.5+/-0.5mm height
Below test result of 219CT:
1.5V
0.5mA-6mA-65mA-270mA
4.2V
0.5mA-20mA-350mA-1.55A




Edited by: WWEFANS on 06/14/2017 - 11:36
maukka
maukka's picture
Offline
Last seen: 2 hours 12 min ago
Joined: 12/31/2015 - 04:15
Posts: 878
Location: Finland

Great! In for four. Pretty much the reason I ordered the Pineapple so better just stock up on the emitters.

ReManG
Offline
Last seen: 4 days 20 hours ago
Joined: 04/25/2015 - 22:52
Posts: 2537
Location: Between the Mexico's

Awesome! Thank you for this, not only is the Pineapple looking great, but I can get the 4000K 219C’s as well!

ALL of my links are non-affiliated for your pleasure...

My Reviews

Lithium Ion Battery Safety 101

 

You bought yourself some good lights, now  go buy yourself some great pants... Bluffworks

I have no affiliation with Bluffworks, except as a very satisfied customer...

 

 

pilotdog68
pilotdog68's picture
Offline
Last seen: 1 week 3 days ago
Joined: 05/30/2013 - 23:31
Posts: 6354
Location: Held against my will in IOWA, USA

Has this one been tested yet?

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

Nicolicous
Nicolicous's picture
Offline
Last seen: 3 hours 47 min ago
Joined: 04/16/2016 - 08:28
Posts: 785
Location: Australia


Im interest in 8 pieces but just to be sure will it fit the board above?

Can you lend me some money to buy new flashlights?

doubleone44
doubleone44's picture
Offline
Last seen: 20 min 7 sec ago
Joined: 08/05/2015 - 11:42
Posts: 107
Location: The Netherlands

How much for them on a copper DTP MCPCB? Can’t reflow myself, lacking the tools (and skill).

Jerommel
Jerommel's picture
Offline
Last seen: 5 hours 55 min ago
Joined: 01/04/2014 - 13:18
Posts: 4443
Location: the Hague, Netherlands

I just payed for 4 of them, thank you.

..waiting for parts..

Still looking for 5” parabolic reflector (for recoil light)

Woytas
Offline
Last seen: 3 months 5 days ago
Joined: 01/08/2016 - 01:02
Posts: 304
Location: Poland

Is it free international shipping? I’m very interested, just not sure if you can ship to Poland. If copper DTP MCPCB is also an option – that’s even better.

ReManG
Offline
Last seen: 4 days 20 hours ago
Joined: 04/25/2015 - 22:52
Posts: 2537
Location: Between the Mexico's

Sent my money, and consider this a bump!

ALL of my links are non-affiliated for your pleasure...

My Reviews

Lithium Ion Battery Safety 101

 

You bought yourself some good lights, now  go buy yourself some great pants... Bluffworks

I have no affiliation with Bluffworks, except as a very satisfied customer...

 

 

WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.

pilotdog68 wrote:
Has this one been tested yet?

Not anything I’m aware of.
WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.
Nicolicous wrote:
Im interest in 8 pieces but just to be sure will it fit the board above?

emitter size is : 3.5×3.5×2.0 same with 219B or the 5000k 219C
It will fit.

WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.

doubleone44 wrote:
How much for them on a copper DTP MCPCB? Can’t reflow myself, lacking the tools (and skill).

Really sorry, we provide only bare emitters.
WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.
Woytas wrote:
Is it free international shipping? I’m very interested, just not sure if you can ship to Poland. If copper DTP MCPCB is also an option – that’s even better.

yes, free shipping worldwide.

Gunga
Gunga's picture
Offline
Last seen: 1 day 13 hours ago
Joined: 11/28/2014 - 16:56
Posts: 1588
Location: Vancouver, Canada

I’ll take 10. I’ll pm about then soon.

Nicolicous
Nicolicous's picture
Offline
Last seen: 3 hours 47 min ago
Joined: 04/16/2016 - 08:28
Posts: 785
Location: Australia
WWEFANS wrote:
Nicolicous wrote:
Im interest in 8 pieces but just to be sure will it fit the board above?

emitter size is : 3.5×3.5×2.0 same with 219B or the 5000k 219C
It will fit.

thanks i will send payment tonight Smile

Can you lend me some money to buy new flashlights?

Phosphor22
Offline
Last seen: 2 days 6 hours ago
Joined: 10/04/2015 - 14:31
Posts: 48

Thanks Rey for doing this; will take 5 of them. Sent PP.

electricjelly
electricjelly's picture
Offline
Last seen: 11 hours 6 min ago
Joined: 08/23/2012 - 03:39
Posts: 378
Location: Los Angeles

I’ll take 4 please. Pm and paypal sent. Thanks

zak.wilson
Offline
Last seen: 16 min 48 sec ago
Joined: 09/29/2014 - 14:27
Posts: 401

In for four. PM/payment sent. I didn’t know these things existed yet.

Ceilingbounce – flashlight testing and runtime graphs for Android

The_Driver
The_Driver's picture
Offline
Last seen: 3 hours 23 min ago
Joined: 10/20/2016 - 05:51
Posts: 455
Location: Germany

Sent payment for three. Also sent a PM. Thanks Thumbs Up

sac02
sac02's picture
Offline
Last seen: 3 weeks 3 days ago
Joined: 09/26/2016 - 15:18
Posts: 710
Location: TX

I just sent paypal and PM, for four.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 55 min 24 sec ago
Joined: 03/24/2016 - 07:44
Posts: 4763
Location: Everything is brighter in Texas

How many of these do you have?

I want to grab a few but short on funds at the moment.

Know guns, know peace, know safety. No guns, no peace, no safety.

The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer , English Philosopher (1820-1903)

Texas Avenger Driver Series

My LED Test series - XP-L2 V5  - Nichia 219C 90+ CRILatticebright "XM-L"XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5  - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung IH351D

Complete collection of all my LED test Charts

WWEFANS
WWEFANS's picture
Offline
Last seen: 8 hours 13 min ago
Joined: 09/04/2012 - 02:35
Posts: 1946
Location: 1200km away from home.

Texas_Ace wrote:
How many of these do you have?

I want to grab a few but short on funds at the moment.

I have 100+, don’t worry.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 55 min 24 sec ago
Joined: 03/24/2016 - 07:44
Posts: 4763
Location: Everything is brighter in Texas

Do you have any beam shots by chance, preferably comparing it to another well known emitter/tint?

I am generally a 4500K fan myself but I have been known to like me a nice 4000k as well.

Know guns, know peace, know safety. No guns, no peace, no safety.

The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer , English Philosopher (1820-1903)

Texas Avenger Driver Series

My LED Test series - XP-L2 V5  - Nichia 219C 90+ CRILatticebright "XM-L"XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5  - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung IH351D

Complete collection of all my LED test Charts

BazzH
Offline
Last seen: 3 days 9 hours ago
Joined: 05/27/2016 - 17:19
Posts: 228
Location: Amsterdam, Netherlands

I’m a noob but can I use these in any of the boards to mod a convoy s2+ into triple? Oh and I like 4500K more, which emitter should I use then?

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 55 min 24 sec ago
Joined: 03/24/2016 - 07:44
Posts: 4763
Location: Everything is brighter in Texas
BazzH wrote:
I’m a noob but can I use these in any of the boards to mod a convoy s2+ into triple? Oh and I like 4500K more, which emitter should I use then?

Yes, these work amazing in a triple build, except that they pull a LOT of amps and get real hot. Thats why I recommend something like a Texas Avenger driver with a regulated medium mode so that you can actually get some good run time without over heating.

Know guns, know peace, know safety. No guns, no peace, no safety.

The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer , English Philosopher (1820-1903)

Texas Avenger Driver Series

My LED Test series - XP-L2 V5  - Nichia 219C 90+ CRILatticebright "XM-L"XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5  - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung IH351D

Complete collection of all my LED test Charts

ReManG
Offline
Last seen: 4 days 20 hours ago
Joined: 04/25/2015 - 22:52
Posts: 2537
Location: Between the Mexico's
BazzH wrote:
I’m a noob but can I use these in any of the boards to mod a convoy s2+ into triple? Oh and I like 4500K more, which emitter should I use then?

You could use one or two of these on a triple board with a 5000K 219C for a nice mix, if you had a quad board two of these and two 5000K, that would be close to 4500K.

Any XPG2, 219 or XPL board fits these “3535” sized LED’s. “3535” is a 3.5mm by 3.5mm sized LED, of which the 219C is.

ALL of my links are non-affiliated for your pleasure...

My Reviews

Lithium Ion Battery Safety 101

 

You bought yourself some good lights, now  go buy yourself some great pants... Bluffworks

I have no affiliation with Bluffworks, except as a very satisfied customer...

 

 

BazzH
Offline
Last seen: 3 days 9 hours ago
Joined: 05/27/2016 - 17:19
Posts: 228
Location: Amsterdam, Netherlands

Cheers! Nice to see everyone here is so patient with my noob questions Smile

djozz
djozz's picture
Offline
Last seen: 1 hour 12 min ago
Joined: 09/07/2012 - 17:04
Posts: 11216
Location: Amsterdam

ReManG wrote:

Any XPG2, 219 or XPL board fits these “3535” sized LED’s. “3535” is a 3.5mm by 3.5mm sized LED, of which the 219C is.


A bit more precise perhaps, 3535-type also implies the standard XP-footprint with the electrically neutral middle thermal pad between cathod and anode connection pads. The Nichia 119 for example is 3535-size but without the thermal pad, it will not fit an XP-type ledboard and therefore I’m not sure it should be considered 3535-type.
ReManG
Offline
Last seen: 4 days 20 hours ago
Joined: 04/25/2015 - 22:52
Posts: 2537
Location: Between the Mexico's

I was a noob once here, just passing on the courtesy I received…. Djozz is correct again in not all 3.5×3.5mm LED’s will fit, but all 219, XPL and XPG series will fit on each others boards and have the thermal path pad in the middle. This was an “Aha” moment for me when I started here…

ALL of my links are non-affiliated for your pleasure...

My Reviews

Lithium Ion Battery Safety 101

 

You bought yourself some good lights, now  go buy yourself some great pants... Bluffworks

I have no affiliation with Bluffworks, except as a very satisfied customer...

 

 

Jerommel
Jerommel's picture
Offline
Last seen: 5 hours 55 min ago
Joined: 01/04/2014 - 13:18
Posts: 4443
Location: the Hague, Netherlands

BazzH wrote:
Cheers! Nice to see everyone here is so patient with my noob questions Smile
A Dutch noob even!
Hartelijk welkom. Smile

..waiting for parts..

Still looking for 5” parabolic reflector (for recoil light)

BazzH
Offline
Last seen: 3 days 9 hours ago
Joined: 05/27/2016 - 17:19
Posts: 228
Location: Amsterdam, Netherlands

Jerommel wrote:
BazzH wrote:
Cheers! Nice to see everyone here is so patient with my noob questions Smile
A Dutch noob even!
Hartelijk welkom.
)Dank, thanx Smile

Pages