Olight I3e Eos copper with UltraTac ss K18 clip, the clip fits better in the i3Eos than the K18 ss…
S2R with my litlle Sanrenmu
They look bigger until placed next to a knife
my preferred:
WOW!!! I’ve been laying low for the past few years, I poke my head back into this thread. holy moly!!!
less than one hour arrived….my II-MK
Neat, Trevi_lux, you must do a thread comparing the E15 and the two Jetbeams.
I do not make complete review of this Jet-II MK, but I have added some impressions and Pics and beams in spanish here: http://luxlinternas.blogspot.com.es/
Thanks! That beamshot gif was really useful and Google Translate did a fair job.
Thaks for comment !
(I will add a short runtime graph today for see the step down and temperature over surface on this)
Temperature over surface:
0 minutes: 25.2 ºC
1 minute: 38.7 ºC
2 minutes: 40.2 ºC
3 minutes: 40.6 ºC
4 minutes: 41.0 ºC
5 minutes: 41.6 ºC
6 minutes: 49.0 C (Turbo cicled again)
7 minutes: 49.5 ºC
8 minutes: 48.9 ºC
All my keychain Lipo rechargueable by microUSB port:
(I have bought today one Nitecore TIP CRI)
is a good indoor light, and only 59mm
I picked up a BD06 a Nitenuman and a cheap COB work light
That clip gap seems really thin…how does it work on jean pants ?
The clip is a piece of crap,
because it is really thin and not strong enough to satisfy my edc.