I hope they are too. If given the opportunity I will post pictures of the clear S2 with the black switch and the regular switch side-by-side. That would be much better than my words.
I like the idea of a option for the tail cap switch. to make it cost effective add a dollar to the choice, SS, black or rubber. Build 30% black, 30% rubber and 40% SS and see what sells best. I would pay a dollar to get my choice. Many would not! Maybe a bad idea?
I donāt think itās a bad idea but I donāt know if Simon would go for it or not. A choice between metal switch colors seems reasonably doable but to go with a rubber switch requires a completely different tail. Iām not sure if heād want to do two different versions.
I like the simple silicon boot better: it feels better, looks better, you can use dimmer leds if a lighted tailcap is made (messes less with the driver), and it is more waterproof.
I understand your thinking. I donāt agree on the looks part but I respect your opinion. I do like the light up tailcaps and while I understand they shine brighter and are more beacon-worthy with a translucent switch boot I love the way the subtle glow looks in the SS switch even though I know itās less efficient. Honestly Iām completely torn on this issue. I really like the clear switch boot as shown in the clear sample. That said, only 25% voted for the rubber boot. The stainless switch is unique in a field where too many lights look alike. Thatās another reason I pushed for the black stainless switch. Itās unique.
Hello all,
I hope I have posted in the correct area, but may I ask if Convoy has decided on a switch style for the clear S2+ yet?
If not, I would like to say I prefer the rubber style switch boot. The design is overall simpler and proven, and one can change the boot colours easily and cheaply if they like 
Iām a very big fan of Shenzhen Convoy Electronics Co, own many of your lights and given many as gifts. Will be sure to buy a couple of these clear S2+ when they come out. (regardless of which style switch Convoy release and hoping for the clear shorty 18350 tube too)
Thanks for what you are doing for the community Simon.
Best regards,
Michael
OMG
Iāve been waiting for 2 months for the clear anodize which I spoke to Simon a long time ago . .
Will get 5+ if this release
Welcome to BLF, eggmang! And with a nice message too.
(interesting: how come your post count is 0, while you clearly posted something? )
Posts in polls do not count towards post count. 
Thank you djozz,
I enjoy reading the articles from the community here. Was a collector of Maglite and hi current Ni-Cd cells many years ago and have started collecting lights again. I also collected many Fenix lights and AA eneloops but once I discovered ābang for buckā and customer service of Convoy it meant Fenix collecting ceased.
Clear convoy S2+ with clear rubber switch boot, black clip and 18350 tube would be a cracking light.
Michael
I think the SS button (especially with that ring of light) looks best by far.
I donāt think itāll mismatch with clear anodization, itās just a different tinted metal.
Pity thereās no plain SS clip though.
Donāt know what material the black clip is, but maybe strip the black paint off?
In this particular case it should stay with the SS switch. It is what will set it off . Making a black piston switch would be a waist and would diminish the overall look . I have no issue with installing one of Simonās new black clips on it, as it would balance out the light. Just enough black to set off the flashlight!
Those that care to go with lighted tail cap can still do so if needed. It does look nice lighted.
Standard SS switch
For looks and for quality reasons
Glad youāre asking
Standard stainless switch (same as current S2+)
I respect everyoneās opinion but this poll was started May 1st and ran for 3 weeks before it closed. The results were given to Simon. You can continue to discuss of course but please understand the voting part is over. Simon went with a black steel switch for the first run. His companyā¦his choice. Other switch options may come later. There are still several things to be worked out before the light is released. When I have a confirmed release date I will start a thread for the new light.
Aha! LOL
Well, Iām eagerly awaiting the clear S2+ w/ black piston switch. Simon tells me āthere is still some problem with this versionā, so Iāll watch this thread for news of a real production run.
I was trying to buy a blue host, and Simon said the only stock he had was clear, to which I replied OK! and then he mentioned the unspecified problem. Such a tease!
Would he sell those piston boots separately?
I prefer the clear stainless steel ones, but would love to put some in various lights.
After read this thread and saw the clear s2+ pictureā¦ iāve made myself 1 last weekā¦
nice
so u strip off the anodize then polish?