Photos of your new arrived lights

They look bigger until placed next to a knife

my preferred:

WOW!!! I’ve been laying low for the past few years, I poke my head back into this thread. holy moly!!!

The Jet-II. I still love the Jet-I though. :slight_smile:

:+1:

less than one hour arrived….my II-MK

Neat, Trevi_lux, you must do a thread comparing the E15 and the two Jetbeams.

I do not make complete review of this Jet-II MK, but I have added some impressions and Pics and beams in spanish here: http://luxlinternas.blogspot.com.es/

Thanks! That beamshot gif was really useful and Google Translate did a fair job. :slight_smile:

Thaks for comment !
(I will add a short runtime graph today for see the step down and temperature over surface on this)

Temperature over surface:
0 minutes: 25.2 ºC
1 minute: 38.7 ºC
2 minutes: 40.2 ºC
3 minutes: 40.6 ºC
4 minutes: 41.0 ºC
5 minutes: 41.6 ºC
6 minutes: 49.0 C (Turbo cicled again)
7 minutes: 49.5 ºC
8 minutes: 48.9 ºC

All my keychain Lipo rechargueable by microUSB port:
(I have bought today one Nitecore TIP CRI)

is a good indoor light, and only 59mm

I picked up a BD06 a Nitenuman and a cheap COB work light

That clip gap seems really thin…how does it work on jean pants ?

The clip is a piece of crap,
because it is really thin and not strong enough to satisfy my edc. :slight_smile:

New competitor AA super compact and rear switch …. :smiley: :+1:

Acebeam M10

Like that Trev, 224lm from the xp-g3 and lots of colour options……………looks a good option for an AA light .

I think that 224 is for NiMH with 14500 seems more :smiley: ….I will test tomorrow.