Great review as always George!
Nice review George
I like the Thorfire C8S, itās a real solid performer
I have 3 in our house (kids a me all have one) and I have gifted another 4 out to non flashaholics and they love them too.
I feel confident in giving these out because of the low voltage protection and can take protected Panasonic NCR18650Bās or the Sanyo 18650GA protected too
I give these out with Liitkala i200ās or 100ās
All up around $30AU a perfect gift set
I find itās really useful for up to 100-130 metres and can reach about 300 metres but I wouldnāt say it lights up much at that distance but you can definitely see a bit of light hitting that distance
I got and modified several of both (Thorfire C8s and Convoy C8). In quality they are comparable but I like driver and and tailcap of Thorfire C8s more.
Thanks for the kind words people !
Iām already modding the C8s , a <5$ mod (not something ānewā) that can make it throw waaaay better .
Well, you werenāt the Barry I was referring to in my post :confounded: , but I was buying them for $13 to $14 (for the older, upgraded model :D), through Slickdeals a while back. They are actually $17 on Amazon right now, but back-ordered. Iām going to order 1, and a TS07 Iāve had in my cart for a while.
Thanks for the kind words people !
Iām already modding the C8s , a <5$ mod (not something ānewā) that can make it throw waaaay better .
very curiousā¦what is your mod?
Nice review. Got one several months ago. The cutout in the tail cap is a big improvement in my opinion. It fits the Convoy C8 also. I seem to remember TF had a coupon code for a short period, that brought them down to $14 or so.
very curiousā¦what is your mod?
Resistor mod , led dedome , installed a DTP board (yes , stock board is non-dtp) , bypassed springs and thicker led wires.
I will write a post with the mod , and step by step amp draw change (before resistor mod , after res mod , after spring bypass , led wires change etc .)
2nd post updated with the mod , i will update soon OP with the rest . Review is complete
2nd post updated with the mod
, i will update soon OP with the rest. Review is complete
Nice review giorgoskok. I have read a few reviews of this newer model, but since I already had a few older ones, I never got one. Your review pushed me into hitting the Accept button, lol. Iām impressed that you got 4+ amps on the stock driver. Do you measure with a clamp meter?
Thanks! Yes ,i use the Uni-t 210e .
Just add one resistor and voila
Nice review and mod Giorgo! :+1:
Very nice review, we are waiting for the next one!
Nice review George. Well done.
I just took a look at the driver in my New C8s. This one is completely different from my older models, and appears to be different than yours George.
[C8s driver](<a) href=āPhoto and Video Storage | Photobucket target=ā_blankā>
Itās also 20mm, compared to 17mm, in my last one.
I have another C8s that i got AFTER the review one , from amazon .
Let me check the driver ā¦
Just checked it and it has the same driver i reviewed .
Interesting ā¦
Are yours 17 or 20mm? My inductor has a lot more windings, also. Still, I get about the same as you. 2.9A with heavy leads on my DMM.
Mine are 17mm .
It also has the sense resistor on the side , as i described , not on the center .
Yeah, my older model drivers looked like this
From what I can tell, it is the same as yours. I stacked 2 r100ās on top of 1 of them to halve the resistance. It was a nice improvement, but I donāt remember exactly the increase. I donāt have a clamp meter so I know Iām not getting that accurate of measurements, anyway.
This was also purchased on Amazon. After they got new stock, at the end of the month. Apparently, they have changed drivers. All modes appear to be the same. Inductor has a lot more windingās. It will resistor mod the same (although, that resistor looks huge ). Just directly under the inductor. Maybe have to put a strip of Kapton tape there.
Anyway, I love the new tailcap :+1: