[SALE] High CRI 90+ Nichias (ENDED)

Thanks

I sent a PM before i saw the note but why not, I have no doubt I’ll find a use for it; I’ve sent another PM. I don’t ‘need’ it the same way as the others though so if someone was hoping to add a single one to their order or something I can easily be persuaded to give it up.

The delay is quite understandable (though I wish it were otherwise) so late December is fine. Thanks for the heads up!

djozz, any of the “219C 90cri 4000k” left ?
If yes, I would take 4 pcs on your 16mm mcpcb…

Clemence is doing the counting, but there were 300 of those so I’m sure there’s enough left.
Added you to the list!

:+1:
just drop me a PM when its time for payment, too many threads here too many interesting things to read and too little time for all of that :weary:

+1 …very understandable :wink:

Finally there’s Nichia seller that will not cost me much for shipping.
Will order some after moving to new house :+1:

Hello,
Would it be possible to swap the XPL LED´s in the Q8 with the 219c without changing anything else (driver?)? Or will they get to much current because of the low Vf? If it is not a problem I am interested in 4* 219C 90cri 4000k. How much would it cost inklusiv shipping to Germany?

Yes, they will be a direct swap into the Q8. They will use a lot of current but they can handle it. Or you can simply use a lower mode as well.

Some aditional…

Please a total of
10x 219C 90cri 4000k
3x 144A 9050 sm453 with djozz MCPCB

End of december is ok. Maybe I order some 319A.

Djozz, I sent you a PM about buying a few of your MCPCB’s for the 144a

found it, will answer. I’m sorry, I’m not very fast with answering all PM’s but eventually I will answer them all.

219C 9050 sm305: SOLD OUT

219C 9050 sm353: SOLD OUT

219C 9050 sm403: (75 pcs left)

144A 9050 sm453: (86 pcs left)

144A 9050 sm503: (90 pcs left)

144A 9050 sm573: (98 pcs left)

VirEnce 30mmx30mm CDTP board (28 pcs left)

At this rate we will sell out before the 144A’s come in! :+1:

I take 4* 219C 90cri 4000k. I have send djozz a PM with further info and question. But i want to secure the LED´s before they run out!
One question: I looked in so many shops on the net but is it right that there are no 219c 90cri D280 or higher in 5000 or 5500k at the moment?

9050 max flux is only D260

Eventhough the 4500K and up already listed, they’re not ready to launch it yet. I asked for those CCTs dozen times

Clemence

- Update 161128: please complete payment to Djozz/Texas_Ace BEFORE 24:00 GMT +8, December 23rd 2016. All incomplete orders will be queued to the next batch delivery

- 219C 9050 sm305:

- 219C 9050 sm353:

- 219C 9050 sm403:

- 144A 9050 sm453:

- 144A 9050 sm503:

- 144A 9050 sm573:

  • VirEnce 30mmx30mm CDTP board:

For payments to me, I do not like having peoples money any longer then needed (never know when a delay might arise) so if it is easier for you to pay now that is ok.

Otherwise I will officially open payments and send out payment instructions around the 13th of December.

We are sorry for the confusion during this extension. We didn’t expect to sell them all in the first group buy so we had planned on running a few of them till they were gone.

Since it appears they will sell out (at least the 219c’s) in this single group buy (yay, BLF power! lol) we had to change things up a bit in order to make things practical and not do another GB for 50 left over LED’s.

On that note if you want some 219C 90+ CRI LED’s, better speak up soon! I am quite sure they will not last till the end date.

Thanks - can I pay now ?.
How to?.
Also I’m in London but wanting these LED’s to be sent to a state in the USA ( CWF customs )
Possible ?.
Who’s best to pay ?.

Thanks.

If the shipping address is in the US then that would be me but I see you are on djozz list. I guess the address change was recent?

Have you made sure the place you are sending them aware what is going on?