Some aditional…
Please a total of
10x 219C 90cri 4000k
3x 144A 9050 sm453 with djozz MCPCB
End of december is ok. Maybe I order some 319A.
Djozz, I sent you a PM about buying a few of your MCPCB’s for the 144a
found it, will answer. I’m sorry, I’m not very fast with answering all PM’s but eventually I will answer them all.
219C 9050 sm305: SOLD OUT
219C 9050 sm353: SOLD OUT
219C 9050 sm403: (75 pcs left)
144A 9050 sm453: (86 pcs left)
144A 9050 sm503: (90 pcs left)
144A 9050 sm573: (98 pcs left)
VirEnce 30mmx30mm CDTP board (28 pcs left)
At this rate we will sell out before the 144A’s come in! :+1:
I take 4* 219C 90cri 4000k. I have send djozz a PM with further info and question. But i want to secure the LED´s before they run out!
One question: I looked in so many shops on the net but is it right that there are no 219c 90cri D280 or higher in 5000 or 5500k at the moment?
9050 max flux is only D260
Eventhough the 4500K and up already listed, they’re not ready to launch it yet. I asked for those CCTs dozen times
Clemence
- Update 161128: please complete payment to Djozz/Texas_Ace BEFORE 24:00 GMT +8, December 23rd 2016. All incomplete orders will be queued to the next batch delivery
- 219C 9050 sm305:
- 219C 9050 sm353:
- 219C 9050 sm403:
- 144A 9050 sm453:
- 144A 9050 sm503:
- 144A 9050 sm573:
- VirEnce 30mmx30mm CDTP board:
For payments to me, I do not like having peoples money any longer then needed (never know when a delay might arise) so if it is easier for you to pay now that is ok.
Otherwise I will officially open payments and send out payment instructions around the 13th of December.
We are sorry for the confusion during this extension. We didn’t expect to sell them all in the first group buy so we had planned on running a few of them till they were gone.
Since it appears they will sell out (at least the 219c’s) in this single group buy (yay, BLF power! lol) we had to change things up a bit in order to make things practical and not do another GB for 50 left over LED’s.
On that note if you want some 219C 90+ CRI LED’s, better speak up soon! I am quite sure they will not last till the end date.
Thanks - can I pay now ?.
How to?.
Also I’m in London but wanting these LED’s to be sent to a state in the USA ( CWF customs )
Possible ?.
Who’s best to pay ?.
Thanks.
If the shipping address is in the US then that would be me but I see you are on djozz list. I guess the address change was recent?
Have you made sure the place you are sending them aware what is going on?
@djozz
I answered on your PM with a few questions about the payment. When you have a bit of free time please check it. So i can send you the money.
Unless there is still enough time left.
There is enough time left, as Texas Ace mentioned as well, I would feel uncomfortable to have everyone’s money already, with the leds still a month away.
Before end December I will send a combined PM to all the people on the list requesting payment.
Update 161129, GMT +8, 19:38
- 219C 9050 sm305: (0 pcs left)
- 219C 9050 sm353: (0 pcs left)
- 219C 9050 sm403: (23 pcs left)
- 144A 9050 sm453: (79 pcs left)
- 144A 9050 sm503: (88 pcs left)
- 144A 9050 sm573: (98 pcs left)
- VirEnce 30mmx30mm CDTP board (28 pcs left)
Ok TA, put me down for 4 of those 219C sm403’s please. I’ve already got some on the way from the other group buy, but I wouldn’t mind comparing these tighter-binned emitters in the mix.
Added!
Update 161129, GMT +8, 21:25
- 219C 9050 sm305: (0 pcs left)
- 219C 9050 sm353: (0 pcs left)
- 219C 9050 sm403:
- 144A 9050 sm453: (79 pcs left)
- 144A 9050 sm503: (88 pcs left)
- 144A 9050 sm573: (98 pcs left)
- VirEnce 30mmx30mm CDTP board (28 pcs left)
Crazy! Almost 500 LEDs in less than 2 weeks!
That’s because you were able to get some amazing bins/tints!
I don’t know how you achieved it is such small quantities direct from Nichia but I’m very impressed!
How’s that for small quantities?
Lol, how many did you get?
I thought you got like a few hundred per bin here and there…
I think the Nichia minimum is a reel of 3000, did you really get that many each?