After 10 days, my tracking number is now working
Delivery progress
Email Notifications: Sign up | Remove
Date Time Location Description Retail Location Signatory Name
2016/12/10 00:26 CNCAND,China International item has left originating country and is en route to Canada
2016/12/09 19:08 510321,China International item mailed in originating country
Some customers informed us that their DHL tracking # is not working.
Today we got a bad news from the shipping company,which is at this month DHL is even slower than some Registered posts.
Most DHL packages got stuck at HK airport for 7-10 days…
So most parcels by Singapore post / E-packet / NL post is on the way to destination , While DHL parcels still got stuck at airport.
Malayzia post has abit delay too.
Hi.
DHL was at my door today, but I was’t home. :rage:
I suspect that it was the package we all are waiting for, but I cant confirm yet. !!!???
They will be back tomorrow.
The tracking number used by the DHL (I called and checked) is another number than the one I got from HAIKElite.
Yesterday the shipment was picked up in HongKong at 1437 and they was at my door today at 1026, so when
“shit hits the fan” it moves fast.
Received my MT03 today with batteries from DHL.
Looks good, batteries are charging.
Tracking number from Haikelite and Paypal never did work.
Got a text message from DHL… that tracking number worked.
looking forward to lighting this thing up:)
Received a text message from DHL about a shipment on the 15th—-these lights are the only thing I’m expecting from Hong Kong
A completely different tracking # also
This is what my tracking shows :
Destination Country - Tracking Consuming: 257 ms
Origin Country - Tracking Consuming: 2458 ms
2016-12-10 15:52 Despatched to overseas (Country code: US)
2016-12-08 15:51 Received from Customer
How do I track it now that it’s in the states? I tried USPS and nothing showed up.
Hi.
The package has arrived and the lights are in the house, but I am not 
…but I have seen the pictures.
(BTW: The number HAIKElite sent us (DHL number) is a ref number found on the package.
They should have sent the WAYBILL number (that is the correct one for tracking), also found on the package.)
Anyway, thanks HaikeLite and Alva.
“those who wait for something good does not wait in vain”
Got mine today 
edit :
Please check 35mm Copper DTP Emitter board first !!!
It held down by 1 screw and loose, that’s why I measured lumen drop so fast.
(I added another 1 screw)
My measurement : about 4300± lumen 100kcd.
aww lucky you’re on “The Land of Smiles”
Im still waiting for mine
I am still waiting for tracking number… DHL one
Thanks POK for the advice on checking the screw. I haven’t received mine yet but will be looking into it. Not having seen it, did you have to create another thread for the second screw or is there already another thread?
Thanks
There is already another thread.
from Tom_E ’s pic.
Chinese quality control
I would have chosen to put the screws 90 degrees away from the screws, just to be sure. The distance from the screw to the wire seems a bit small.
Anyone having any issues with their MT03s? Ordered three, and all have this problem. Medium mode does not work. When cycling through the modes, when it gets to “medium” it just flashes once, and doesn’t get any brighter. Has the same brightness as “low” mode. The rest of the modes seem to work properly. The lights involved are all 4S models, two nw one cw. Batteries used are Sanyo 18650ga.
Well, just tried some 18650Bs in one, and now I have medium mode? Of course, I can’t tighten down the tailcap. All three lights that exhibit this behavior have different sets of the 18650GAs. Weird. Any ideas why this could be occurring?
I have the MT03 4S with 18650ga supplied by Haikelite.
on low mode, one of the LEDs is brighter than the other 2
then on med, the 2 dimmer lights increase in brightness to match the bright one in low mode.
overall brightness from low to med is hardly noticeable.
the low low, high and turbo all seem to work normally.
Good catch, that’s exactly what mine is doing. Does it with GAs, Samsung 25Rs, but works normally with 18650Bs, which doesn’t supply enough amperage.
There’s only one thing that comes to my mind: screw this.
I got my MT07 NW & MT03 NW about an hour ago.
Loaded up a set of GA cells rested to 4.14v.
MT07 NW 3480lm
MT03 NW 6770lm
My MT03 looks to be a 2S2P.
My MT07 looks like it’s 4S.