KD (kaidomain): Deals and new products thread

Hi

KDLIGHT P60-UV 365nm / 395nm is newly arrived.

http://www.kaidomain.com/p/S026464.KDLIGHT-P6-UV-365nm-3V-12V-1-Mode-OP-UV-P60-Drop-in

http://www.kaidomain.com/p/S026463.KDLIGHT-P6-UV-395nm-3V-12V-1-Mode-OP-UV-P60-Drop-in

Thanks

Nice. I’ve seen that type of die before (Semileds?) in leds and the output is good! The 365nm version just emits some white-ish/yellow-ish light as well.

Ban , could you post the label from Nichia of this product ? http://kaidomain.com/p/S026299.Nichia-NVSL219C-R9050-D240-4000k-CRI92-LED-Emitter-1-pc

I mean the label like you have posted in Nichia 219b : http://kaidomain.com/Product/PhotoGallery/56186/236761#id=0

Thanks BanL.
I will PM you soon. :+1:

Which tint bin is this?
http://kaidomain.com/p/S026146.Triple-Cree-XP-G3-Neutral-White-4500K-LED-Emitter-with-20mm-x-1mm-DTP-Copper-PCB-Parallel-w-optics

Can you post the photo of the reel?

I can’t be the only one who wishes KD to systematically provide a picture of the reel, please KD tell us what we are REALLY buying and you’ll sell more

restocking those sold out items?

Cree XP-L2 HD Neutral White are back in stock guys

…and with a picture of the Cree package:

KD is KoolDomain. :sunglasses:

So, the new information we have is that these are 70+ CRI LEDs.

Merry Christmas to all BLF friends,

We must try our best to get those hot sales Flashlight Parts and Accessories.

We understand yours concern. I will help to follow this.

Merry Christmas

Ban

Does anyone has experience with one of these items?
http://www.kaidomain.com/p/S024846.DIY-DRG99-Heatsink-Compounds-with-Injection-Tube-0_5g-2-pcs
http://www.kaidomain.com/p/S003120.HT916-Silicon-Thermally-Conductive-Sealant

Are those the thermal glue kind (does it get hard)? Can they be used to pot a driver?
And how do they perform?

Nice, ordered qty 4 of the V6 3B's, and some more of those black MCPCB's - they sure look good - nice wide traces, etc. The triples are quite thin though at 1 mm. Not sure why the triples are thinner than the single MCPCB's. Triples should actually be thicker - 2 mm would be nice.

If you solder the mcpcb on the spacer (or copper pill etc) i don’t think there will be a problem .

But i would like too , a better one , with 2mm thickness .

Aw.

Shucks.

I agree thicker triple MCPCB would be better.
With 2mm thickness the legs of the optics wouldn’t stick out / through the bottom either.

BanL, could you source the new XHP50.2 leds?
http://www.cree.com/LED-Components-and-Modules/Products/XLamp/Arrays-Directional/XLamp-XHP502

Also, many drivers you sell have strobe and sos modes. Personally (and I’m sure some here on BLF would agree) I’m not a big fan of those modes. I rather have 3 (or 4) normal modes like: (turbo), high, medium, low, (moonlight). With a possibility of hidden blincky modes like the strobe and sos. Hidden could be a double click or something. (like this one: FX-30 )
Some examples: the FX35 MT-G2 boost driver , the FX35 XHP35 boost driver . (my personal favorites :D)

Hi friends

Happy New Year and Wish you all the BEST.

Thank you guys for all your support to KD.

Ban

Support@kaidomain.com KD

Hi

Yes. We are waiting from our supplier. Once we get it, we would update to KD asap.

You are right. There is too many different wanted with different mode arrangement.

To thanks for your advice, i had uploaded a new CREE XHP35 driver (this is required by once of BLF friend)

http://www.kaidomain.com/p/S026504.H2-C-22mm-1_5A-1-or-2-cell-5-Mode-Boost-Driver-Circuit-Board-for-Cree-XHP35-XHP50-12V

Thanks

Thank you very much for sourcing this driver, order placed.

Happy New Year BanL