MTN Electronics: LEDs - Batteries - Lights - Chargers - Hosts - Drivers - Components - 1-Stop-US Source

Commercial Sellers' Spot
7202

I wonder if there would be a big enough demand and worth your while Richard
for a 30mm 3volt E-Switch FETDD driver with the Manker U21 and UTorch UT02 and now the Convoy L6 single cell tube coming out in a couple days? :wink:

I would take 5 right off the bat! :smiley: :+1:

7203

Will XP-G2 bare LED’s, specifically 5A3 be returning to stock? I would like a quad star with 2 5A3 and 2 3D’s on it…

7204

Richard, which version of the ATtiny13 MMU do you have in stock? Your listing for the MCU shows a picture of the 20-pin, but doesn’t really say which it is. All of your tiny FET drivers appear to use the footprint of the 10-pin chip.

7205

10-pin. MMU are all 10 pin.

7206

Thanks!

7207

Thanks for letting me know. I also fixed the picture.

7208

:wink:

I’ve been wondering about your firmware choices as well. You don’t really have BLF-inspired firmware choices on your site. Maybe you’ve mentioned this before and I’ve missed it? I did see Bistro listed for the ATtiny25. Would you flash a specific firmware from here if it were asked for by name on the order? I’m thinking about Biscotti for the ATtiny13a MMU. That would be perfect for the light I’m hoping to mod soon. It’s the compact version of Bistro that fits in the tiny13 memory space. ToyKeeper made it for Convoy to use in their standard (single channel linear regulated) drivers.

7209

Good point.

7210

I need to get Biscotti added to the lineup, but haven't had the time quite yet. Things have been busy around here.

7211

Thanks. I understand that you’re busy. I don’t want to add to your stress or anything. Is it a matter of just not having it up on the website? I’d be happy to pay for one of the other choices from the drop-down and just put the request for Biscotti in the order comments, if that would work. Alternatively, I’m not in a super hurry. If it’s gonna be a few days, I can just wait. :innocent:

7212

Ok… so we need to stop buying from the store for a few days and let Richard and his lovely wife catch up! :beer:

7213

The website is the easy part...I need to compile and test it on a few different drivers first to make sure it's just right.

7214

Thanks Richard.

7215

On your 17mm and 20mm fet-only drivers it shοuld be working as is . Just saying :slight_smile:

7216

Not necessarily. The mode switch timing may be off, the LVP will definitely be off. It would run, but it wouldn't be right.

7217

Of course :slight_smile: . These need quite some time , test - reprogram - test again , and you have to do it for a lot of different drivers …

7218

Hi all. Approximately how long would it take between ordering and shipping if I order three MTN, FET+7135 drivers? (These are in stock at the moment.) I ask because I have a small window where I can ship to a friend in the US and if that can’t happen, I’ll have to ship to a different address which will take a month or so to get to me. Hahahahh!

Thanks! :smiley:

7219

If you ordered today they should ship tomorrow, unless you want something custom like custom firmware (that might take until Monday or Tuesday).

7220

I have to hand it to Richard, and family. I have never had an order not ship next day, except maybe Sunday :+1: and some ship same day.

7221

Do you know how long shipping to Germany takes normally, I ordered 2 XHP35 Hi on 8. Dez. and nothing received yet