Thanks!
Thanks for letting me know. I also fixed the picture.
I’ve been wondering about your firmware choices as well. You don’t really have BLF-inspired firmware choices on your site. Maybe you’ve mentioned this before and I’ve missed it? I did see Bistro listed for the ATtiny25. Would you flash a specific firmware from here if it were asked for by name on the order? I’m thinking about Biscotti for the ATtiny13a MMU. That would be perfect for the light I’m hoping to mod soon. It’s the compact version of Bistro that fits in the tiny13 memory space. ToyKeeper made it for Convoy to use in their standard (single channel linear regulated) drivers.
Good point.
I need to get Biscotti added to the lineup, but haven't had the time quite yet. Things have been busy around here.
Thanks. I understand that you’re busy. I don’t want to add to your stress or anything. Is it a matter of just not having it up on the website? I’d be happy to pay for one of the other choices from the drop-down and just put the request for Biscotti in the order comments, if that would work. Alternatively, I’m not in a super hurry. If it’s gonna be a few days, I can just wait. :innocent:
Ok… so we need to stop buying from the store for a few days and let Richard and his lovely wife catch up! 
The website is the easy part...I need to compile and test it on a few different drivers first to make sure it's just right.
Thanks Richard.
On your 17mm and 20mm fet-only drivers it shοuld be working as is . Just saying 
Not necessarily. The mode switch timing may be off, the LVP will definitely be off. It would run, but it wouldn't be right.
Of course . These need quite some time , test - reprogram - test again , and you have to do it for a lot of different drivers …
Hi all. Approximately how long would it take between ordering and shipping if I order three MTN, FET+7135 drivers? (These are in stock at the moment.) I ask because I have a small window where I can ship to a friend in the US and if that can’t happen, I’ll have to ship to a different address which will take a month or so to get to me. Hahahahh!
Thanks! 
If you ordered today they should ship tomorrow, unless you want something custom like custom firmware (that might take until Monday or Tuesday).
I have to hand it to Richard, and family. I have never had an order not ship next day, except maybe Sunday :+1: and some ship same day.
Do you know how long shipping to Germany takes normally, I ordered 2 XHP35 Hi on 8. Dez. and nothing received yet
LOVELY!! Thanks Rich!
Usually 1-3 weeks. You can check the tracking number you received along the way, although looking at the tracking your package has taken the long route there. Unfortunately, there is nothing we can do to speed things up once the post has the package.
Hi,
do you still offer Qlite drivers with guppydrv V2 firmware? I need a driver with “Strobe only” but on your website only V1 is listed.
Regards
Kenjii
No. They were never offered with any other guppydrv than what you see listed.