Thanks. I understand that you’re busy. I don’t want to add to your stress or anything. Is it a matter of just not having it up on the website? I’d be happy to pay for one of the other choices from the drop-down and just put the request for Biscotti in the order comments, if that would work. Alternatively, I’m not in a super hurry. If it’s gonna be a few days, I can just wait. :innocent:
Ok… so we need to stop buying from the store for a few days and let Richard and his lovely wife catch up! 
The website is the easy part...I need to compile and test it on a few different drivers first to make sure it's just right.
Thanks Richard.
On your 17mm and 20mm fet-only drivers it shοuld be working as is . Just saying 
Not necessarily. The mode switch timing may be off, the LVP will definitely be off. It would run, but it wouldn't be right.
Of course . These need quite some time , test - reprogram - test again , and you have to do it for a lot of different drivers …
Hi all. Approximately how long would it take between ordering and shipping if I order three MTN, FET+7135 drivers? (These are in stock at the moment.) I ask because I have a small window where I can ship to a friend in the US and if that can’t happen, I’ll have to ship to a different address which will take a month or so to get to me. Hahahahh!
Thanks! 
If you ordered today they should ship tomorrow, unless you want something custom like custom firmware (that might take until Monday or Tuesday).
I have to hand it to Richard, and family. I have never had an order not ship next day, except maybe Sunday :+1: and some ship same day.
Do you know how long shipping to Germany takes normally, I ordered 2 XHP35 Hi on 8. Dez. and nothing received yet
LOVELY!! Thanks Rich!
Usually 1-3 weeks. You can check the tracking number you received along the way, although looking at the tracking your package has taken the long route there. Unfortunately, there is nothing we can do to speed things up once the post has the package.
Hi,
do you still offer Qlite drivers with guppydrv V2 firmware? I need a driver with “Strobe only” but on your website only V1 is listed.
Regards
Kenjii
No. They were never offered with any other guppydrv than what you see listed.
Morning Richard. I sent a PM with a request. I apologies for the terrible timing. :person_facepalming:
I know it’s not quite the same, but guppydrv’s Group #9 is Strobe - 100%, no memory. If you used that, the light would come on in Strobe mode all the time, and could then also be used as a flashlight if needed.
I think i found what i searched for. An old FET driver has the option for guppydrv Rev. 2. I am going to order that one instead of the Qlite.
Richard, do you have an idea when you’ll get more 22ga silicone wire in stock? Your listing says you only have 3ft remaining, and I need more than that.
I've been sicker than a dog today 
, but when I get out there tonight I'll check and see if I have any extras laying around (I usually keep some extras in case I need some for drivers or lights!)