Lumintop Tool Ti - Lighted Switch

I had previously modded this light but had an idea today…

Could i make a lighted tailcap for this using the original electronic switch ?

Yes! :wink:

Modded with a TP4056 charger board LED, a resistor, some thin wire, uv setting glue and a lot of perseverence.

Tailcap light goes off when light is on
Three modes work with 10440
Lockoutable

Max – 220lm
cd – 900
Throw – 60m

.

.

Some Runtimes

.

Unbelievable. Lucky you have pictures or it would not have happened. :laughing:
You never cease to amaze. :+1:

Wow, that is steppin’ it up! I love my tool ti’s and this is nuts.

Bravo!

That’s pretty slick. Nicely done.

Bob

… way cool!

You sir, have some mad scientist skills!

good thinking and very cool! :sunglasses:

How did you make 3 modes on a 10440?

Thanks for the comments guys, always appreciated :+1:

.

Magic! :laughing:

It must be due to the added LED & resistor. I haven’t started working on drivers yet.
I did not expect it to work but now by fast pressing the switch the light cycles through the modes without turning off. Same mode order.
If i turn the light on, wait 3 seconds and press the button again it will turn off.

Here’s a picture of what i did.

1+ ground ring to resistor to LED+ . LED- to 2-capacitor.

The ground ring is positively fed through the light body from a bleed resistor on the driver i believe.
The 2- connects to the battery-.
I have not tested the light with a 1.5v cell.

Experiment at your own risk :wink:

Hah, nice going there, Isaac Clarke :smiley: :+1:

Can you post bigger image? Thanks, Mike

Now I will do my impression of …stunned . WTH !

Simply stunning!

Yeah i must admit, this one is really cool! I love it :slight_smile:

It would not be difficult for the manufacturer to make these stock with some small changes to the light.
They would sell like hotcakes, remember though, you saw it here first :laughing:

Wow. I am so envious of your skills. and your lights.

Very cool!

Amazing! Really… I’m amazed with your mods everytime I see them Stevi!

That is a really fine bit of work!

CRX !

It seems problems will him never vex

As his fine mental muscle will flex

With ridiculous ease

Showing great expertise

He manipulates tiny objects

As he speedily does more projects

He makes simple what should be complex

He has talent so rare

And a marvelous flair

For producing such awesome effects

As for modding , the Bell Curve he wrecks

He's continually at the apex

For it seems every day

He puts on a display

I can't wait to see what he does next !