JAXMAN E2L hosts are available now

Hi,

What does the $19 include? Does that include the MCPCB and 3 emitters + the body and the only thing missing is the driver?

Thanks for trying this,
Jim

OK, I ordered a pair of hosts without LED board.
Thank you.

I hope we all will come up with a variety of interesting flashlights using your host, and encourage you to keep making good flashlights.

(And I earlier ordered a complete light, which I look forward to having soon)

:sunglasses: Tomorrow is payday. I definietly buy a pair of host with MCPCB and lens.
One will get Texas avenger driver with XP-L HI leds, and the other I will make it for somebody as he requests or build it with the same TA driver and nichia leds.

Hmm… I think the only stock light that’s close to what the E2L is, is the Manker E14 with quad 219C (4000K 90+ CRI) or 219B (5000K 90+ CRI). For black triple 219s you need to mod for example a Convoy S2+ (or just get the host) with a triple led board, optics and spacer. At least I don’t think there are other lights out there that are black with triple 219… Cheers.

I totally agree with what ‘djozz’ says and did the same thing also.
Plus I added a M8 and a few other little goodies too. :wink:
Thank you Jaxman and best regards………. :+1:
I also think $19 is very fair for what is included………
:slight_smile:

Maybe a dumb question but do any or all of the 3 options come with a glass lens over the TIR?

Edit: Never mind, the banner shows …+Lens on all 3 once added to cart.

I think they mention the TIR as lens. So there is no glass lens.

That would make sense right?

But the E2L product page (not the host page) says
“JAXMAN E2L equip with a triple TIR lens behind a AR glass.”

Oh. I didn’t see that. After that information I don’t know. :disappointed:
Maybe Jaxman explain it or I will find out when I get it. I don’t mind really because I have 3 unused Carlco lens at home and some S2+ lens too. :slight_smile:

Just a thought, but I am reasonably confident that RMM might be who Jaxman is referring to in the OP as talked with a BLFer and DHL etc.
So these hosts would then be U.S. available… We’ll know for certain quickly,

OP,

Please remove the picture of my order from the OP. I thought that it was an available option base on the following post made by you (Post 75 in your other thread about this light):

[quote=jaxman] . . . hi dears, If anyone need we use a silicon paste instead of the glue, we sure can do it for you .that is too easy . but we will do it only our buyer reqire it. To use a silicon paste is more easy and low cost than now. [/quote]

(perhaps if someone else asks as well?)

Jaxman, could you please remove the picture with the order in the first post, it is generally regarded as breaking in on someone’s privacy if you publicly show someone’s real name.

Just curious, what in that “picture” identifies it as your order ImA4Wheeler?
Granted my eyes are not as good as they once were, and I am probably missing it; but I don’t see anything. Help an older man out…. :slight_smile:

^

Beats me if there is any identifying info in it or if it has any info that can be used to figure out if it belongs to me. Whether it does or doesn't, I prefer it not be posted.

I am glad my order prompted him to make hosts available, but I am very unhappy that he is reluctant to fulfill my order. To help him not get heat with Ali for not fulfilling it (shipping deadline was at hand), I submitted a cancel order request which was promptly approved by him.

^
OK I didn’t miss anything then, my bad.
I was just wondering why you thought it was your order… cause I could not see anything that identified anyone.
For all I knew it was my order. :slight_smile:

^

I can clearly see that it is my order. I placed it and it ties to my order in every respect. So I can identify that it was from me. Whether others can or not, I haven't the faintest clue.

I read it wrong btw, I thought that the name in that picture was yours IA4W, but it is the name from the jaxman guy answering your request. That makes it less of a problem IMO, but still what you write to a vendor is between the two of you and should in principle not be made public.

If anyone wants to sell me 1 host (I don’t need two), let me know.

Hey, Jaxman, feel free to use a screenshot of my order as the “for example” picture in your original post, if you decide to edit it.

Here it is:

If you hilight this response in your browser then “view source” you’ll see the URL for the screenshot.

I to am glad he made hosts available. I hope in time he will make others available on a regular basis.

And in saying what I am about to say now, I am not trying to be an A-hole & it is not aimed directly at you either.

But as far as I know Jaxman is a small operation that, in my opinion makes a very good light. That is opinion based on the 5 Jaxman lights that I now own.
I am most assured he has a standard way of doing things and assembling the lights they offer for sale that works for them.

To deviate from their standard takes time, and time is money.

Deviation can also cause confusion, and for whatever reason; that is just how it is. And that applies to more than just flashlights. Think on a larger scale assembly line production…… it is standardized. The workers know exactly what parts they are installing each and every day. To deviate would cause mass confusion.

Think of Jaxman as a smaller version of assembly line production. They offer certain production lights for sale that probably at least 99% of the buyers are happy with just as they are.
Deviation can & will cause confusion. Add the language barrier in there also and things are only exasperated.
Cause I personally do not speak any Chinese at all. Jaxman, to his credit; at least does speak some English.

What he could do, IF he every chose to; is create a “Custom Shop” where anyone who wanted a light that was outside of their standard production lights could order it and pay up front.

He could offer a choice of different components… drivers, LED’s, color, etc., etc… He could have one person assembling the Custom Orders as needed and charge for the service. Parts, labor, time, etc…… just like many other businesses do. Mountain Electronics, Rock River Arms, & Smith & Wesson……… just to name a very few.

That way, IF he chose to do it; it could be profitable for him & hopefully worth his time to do it.

There is no way Jaxman, or anyone else who is a manufacturer; can cater to the requests of individuals who want a change in the standard production offerings and still remain profitable without going the Custom Shop route.