I’ve done mods but haven’t posted because they are simply not as neat or spectacular as most of what’s posted here. Yesterday, I cut the head of a VG10 short and put a triple, seoul, z power LED star inside mostly because these LEDs, though low luminesence, has the best tint I’ve ever seen! (and they were the only triples I havee, lol) Tools used, file, hacksaw, knife, wire cutter. YES, it was a PITA to do with hand tools and there’s a blister to show for it! lol. Driver is an RMM, FET+1. No current measurements taken as yet. ( I still have to put epoxy around the colimator to make it waterproof.)
Congratulations on the 7000 true flashoholic posts, ImA4Wheelr!
A mod that required a lot of fixing before it finally turned out right, a Solarstorm SC02 modded with DrJones RGBW driver, colour XP-E2’s and a Nichia 219A high CRI:
After joining BLF, this is the first light I modded. Originally it was Black and had a CREE X-PE. Ran on 3 - AAA cells and for it’s size it threw pretty good. What I did was strip off the Black anodizing and I tried to re-anodize and stain it Purple. After many attempts I just couldn’t get all 3 pieces the same shade of purple. So I settled on just anodizing the center tube and I buffed the tailcap and head. I also upgraded it to an XM-L, Direct Drive and used some copper pennies for a heat sink. Later I converted it to run on a single 18500 Li-ion. Back then, it never occurred to me to post my efforts.
Like I mentioned, my very first LED mod.
Congratulations on surviving BLF for so long without going Bankrupt!
ThorFire VG10 Quad
Baked to a champagne with polished head
XP-L HI V3 3C on Tpad Quad. MtnE Fet+1 Bistro, Carclo 10622 24mm quad Narrow Spot Plain TIR, Springs bypassed. Tpad soldered to copper spacer.
$$$ toward RMM is an awesome giveaway! I think I’ll enter!
So I’ll mention my DIY triple spacer mod I coincidentally posted here TWO YEARS AGO TODAY! :partying_face:
Using a 3/4” brass PEX plug from Lowes, I was able to successfully make spacers for my triple builds. This has worked very well, as I have built three triples using this same $2.19 plumbing piece:
1. A triple 2.8A regulated high-CRI Nichia 219b in a Convoy S2
2. A triple 2.8A regulated XM-L2 in a Convoy S3
3. A triple FET-Driven XP-L HI in a Convoy S6
…and they have all worked great using this technique.
Congrats on the 7K posts! Not very high quality modding, but I got my Sunwayman V11R turned into a triple running on AA battery. https://budgetlightforum.com/t/-/33424
Take yer time! I’m still hoping to get a mod thread done in time to join this GAW! If you read all the threads before drawing a number, maybe I’ll have time to get in!
Thank you for bringing that up DavidEF. Part of my goal with this giveaway was to encourage folks to get into modding. Lets go for April 20th. Five days after the big tax day in the USA.
Please remember to put your mod link in your first post to this thread as the OP says only the first post counts. I inadvertently created that restriction when I made the OP, but its too late now to changed the rules.