FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

Sorry for posting that stunning light Fritz made so big at the start of the OP.
It is for the size, I will scale it down and place it lower to avoid people thinking it will look exactly like that.
Size is correct though :wink:

How about when many many people prefer a matt or even an pigmented ano over bare machine finish? :blush:

Pigments, well manufacturer can sell black ones afterwards :wink:

Ok :partying_face:

i hook up with the guys who suggested a hi-cri version with nichia triple! preferable in a titanium host :)

add me plz :smiley:

Well the choice of LEDs is simple
Lots of lumens with a decent tint.
Just imagine we say 2500 lumens, Djozz tests show at 9A 3K, when one wants to giggle or impress or just needs a full blast for not so long. It is just there in your pocket when you want. For EDC use you ramp to the level you need and have nice runtimes.
In a very small elegant light
Just plain awesome!

Exactly .

Made a quad with my Blf X5 , quad xp-g3 s4 3a . Even with the small 14500 cell draws 11,5 amps and puts out at least 2.2k lumens , haven’t measured …

A suggestion for a German engraving:
TLF & BLF SONDEREDITION

Please add me to the list!

I will take one please.

Rob

Put me for one please
Florian

Gimme.

Yep will update list later
After reading of you “Awesome Archive of BLF specials” in the Q8 topic I did kind of expect your question TK :wink:

If this is to have a reflashable Narsil driver, and if there is no indicator LED, do you think there’s any chance of connecting a spare ADC-capable pin to LED- ? This would allow it to sense light levels through the LEDs when they’re off. Would be nice to have this for future expansion, like screen-based configuration.

I’m in for one.

right after clicking post here I copy paste it in the we (DEL, Tom Fritz Cawi and me) have about the driver :slight_smile:

Pin #7, where there used to be the voltage divider for the ADC, is free. There’ll be at least a solder-pad so something can be connected to this pin.

I was thinking more along the lines of having a trace built into the driver itself, and maybe some new firmware. I don’t know how long it’ll be before the project is ready to ship, but perhaps I could get this idea ready by then?

Basically, instead of a config mode, configure the light on a web page and apply the settings by pointing the light at the screen. Could also potentially be used for other things, but the main use is making configuration easier and more detailed.