ENDED

[delete]

4x 18650 .can use any top head?
flat top .button top.protected.unproteced.

[lionheart_2281]

@delete

4x 18650 .can use any top head?
flat top .button top.protected.unproteced.

Check OP, you can see 30Q’s being used because there’s springs, so any cell should work

[JasonWW]

@lionheart_2281

Check OP, you can see 30Q’s being used because there’s springs, so any cell should work!

I wouldnt say ANY cell will work. There are still length considerations. We will have to wait and see if certain long, protected cells have enough room to fit.

Any top head style (button, flat, whatever) should work, though.

[lionheart_2281]

@JasonWW

@lionheart_2281

Check OP, you can see 30Q’s being used because there’s springs, so any cell should work!

I wouldnt say ANY cell will work. There are still length considerations. We will have to wait and see if certain long, protected cells have enough room to fit.

Any top head style (button, flat, whatever) should work, though.

I figure if a short flat top AND long protected cells both work, anything else falls in between

[freeme (youtube.com/@1thedeals)]

Unprotected cell maybe too short. Yes, it will turn off momentarily if you give it a good tap on the tailcap. I didn't even notice it until I saw George's feedback.

@lionheart_2281

@JasonWW

@lionheart_2281

Check OP, you can see 30Q’s being used because there’s springs, so any cell should work!

I wouldnt say ANY cell will work. There are still length considerations. We will have to wait and see if certain long, protected cells have enough room to fit. Any top head style (button, flat, whatever) should work, though.

I figure if a short flat top AND long protected cells both work, anything else falls in between

[Stereodude]

@freeme

Unprotected cell maybe too short. Yes, it will turn off momentarily if you give it a good tap on the tailcap. I didn’t even notice it until I saw George’s feedback.

Are the cells in series or parallel?

[freeme (youtube.com/@1thedeals)]

In series.

• Working voltage: 11.2 - 16.8V ( over discharge protection )

@Stereodude

@freeme

Unprotected cell maybe too short. Yes, it will turn off momentarily if you give it a good tap on the tailcap. I didn't even notice it until I saw George's feedback.

Are the cells in series or parallel?

[Silent_Star]

Interested depending on price.

[Enelooper]

@freeme

In series.

• Working voltage: 11.2 - 16.8V ( over discharge protection )

@Stereodude

@freeme

Unprotected cell maybe too short. Yes, it will turn off momentarily if you give it a good tap on the tailcap. I didn’t even notice it until I saw George’s feedback.

Are the cells in series or parallel?

Is it safe to use 4.35V cells?

4x4.35 = 17.4V.

[SteveMidwest]

I am just now getting a chance to see the fins update on this. I am on the list, and still interested.

Remember UTorch. The more/deeper the fins, the better. People (We:) will want to run this awhile on turbo 1 ~3300Lm you know, and would also like as much time as possible on Turbo 2. Fins will add time. I would like to see them as large as the bezel.

We don’t want a 1200lm flashlight. :sunglasses:

We don’t need a cooking appliance. :person_facepalming:

Bring those fins out some. This is not an Art project.

I would like a tripod mount, and I would be interested in an OP reflector. Flood it Baby! Do you think it will be offered in both reflector types, or tested in both?

Here is a picture of one of my very favorite flashlights ever (MK35). This thing is spectacular!

[DBSAR]

add me for 1

[glide_1]

Add me, thanks.

[2Ace]

Interested depending on price

[gehrmo]

Interested depending on price.

[freeme (youtube.com/@1thedeals)]

Just to check how many people would be interested in unprotected button top GA?

[delete]

interest sanyo 18650ga or 30q button top
but is seller can ship to any country?

[Phantom1]

Interested depending on wholesale​ price please

[freeme (youtube.com/@1thedeals)]

What is the acceptable price for 4pcs set?

@Phantom1

Interested depending on wholesale price please

[CASHESVALLEY]

Interested

[giorgoskok]

I guess 18$ per set for button tops would be great …