New 4XP Noctigon MCPCB for quad optic

Yes, length is smaller. But with 10622 head has to be larger. Tail looks larger too. Could you please share the diameter numbers?

I did some pixel counting. It’s not accurate, but I guess the tail cap is 26.5 mm, battery tube: 24 mm, head: 28 mm + protrusion. Head would be 24 mm long, tail - 23 mm.
This adds up to ~48 cm^3.
For comparison, DQG Tiny 4th 18650 is very roughly 38 cm^3, 21% smaller.

If shortened to 18350 size, this would be very roughly 34 cm^3 vs. 26 cm^3, 25% smaller.

28mm(head )* 24mm(tube) * 25.6mm(tailcap)

Whatever happened with the rumors of the new Meteor I believe it was or something similar, read about a new light on the Meteor thread some time back ? Last year I believe.
Great new light Hank, and still wishing you’d start remaking some of your lights from the early days again,

Thank you

It’s probably going to be the D17.

Yes, thank you Maukka, I think you very well could be right,
I think because I was reading the Meteor thread when I read of a new light by Hank I may have just assumed the talk of a new light would be similar to the Meteor.
Either way, I do know only one thing for sure, if it’s from Hank it will be great so I have made a note to follow this thread more often, thanks again I do believe you are correct.

Edit: Was reading the thread back some pages from here and found someone who actually quoted the same thing I read on the Meteor thread and what my question was here, so relieved to know I wasn’t to far off anyhow, but sadly Hank didn’t catch the question or comment anyhow, but this forum member recalls the exact wording of what I read some time ago and what lead me to think a new styled Meteor was in the mix from Hank and it was as follows,
“The planned 8×18650 powered Noctigon was I believe supposed to have 9 XHP35 HI emitters for 16000 lumens. Perhaps this changed to seventeen XP-L HI emitters? Or maybe seventeen XP-G2/Nichia emitters for around 10000 lumens, but with a lot more throw than the M43?”
And rats no reply from Mr Hank, that was what I was asking about, what a light that would be, but these new lights mentioned by Hank sure do sound nice so will will be keeping my eye out

^ Hey hope is all fine Mr. T18. :sunglasses: Here’s the info Hank wrote about the new monster light, post #100 and #121: Noctigon Meteor M43 BLF Discount Buy - $50+ Discount! - MTN & Intl-Outdoor
And according to post #218 of this thread, D17 is a typo, and should be D7 for seven emitters.
Whatever this D7 is going to be, it sure ain’t no shoe lace light…

I would like to get some of this Noctigon MCPCBs but MOQ is 10 sets (20 boards), isn’t that a bit too much! Also LEDs are 5 pcs min.
I understand that you don’t want to bother with small orders but if you could reduce XML20/16 boards to 5 sets that would be very nice.
Thanks

Hey pal, all is good hope the same for you Mr. hIKARInoob and just awesome thanks for the links and I agree with the D7 being no shoe lace light, got the typo part mentioned by Hank but have to admit I was looking at that when at first mention of a D17 really hard and wondering, is this what was being talked about…?? Ha ha, Nope…
Well got all the answers now thanks to you and others as well, so thanks again my friend have a great one, Later … I am off to check that link you so kindly provided, thanks again…! :laughing:

+1

Well, they are a discounted price and they have free shipping! I think the MOQ is just to insure that he doesn’t lose too much money on these!

Thanks for your understanding, the price including shipping is very cheap now,
by adding 10 sets MOQ is only to cover some shipping fee.

Just add the Noctigon 4xp 4p quad board.
http://intl-outdoor.com/index.php?main_page=products_new

Looks very interesting, and no more jumpers with the parallel setup, can’t wait to see the beam profile in comparison with the MTN quad board.

Order placed thanks :+1:

Subscribing so I can get updates on that nice looking D4! Looks like a promising alternative to the FW3A. Going to be a tough decision between the two.

I’d assume this will be similar to the tpad quad board. The led orientation is the same.

I looked at this before i ordered the new MTN board yesterday.

A third version prototype is produced and tested, the bezel on the final version
will have the same anadizing as the body,

The turbo gets hot so quickly!

Can’t wait Hank :smiley:


Glad to hear that it is almost there. Sorry, I can’t stop myself from comparing :person_facepalming: : did the light become a bit longer with the latest bezel?