Active again: Nichia 219CT 4000K R9050 high CRI LED (and some trits)

No problem, I think most of the lack of variance is Nichia, but also that Rey buys them from the same reel for each batch. I would imagine a half dozen from several different places in the reel across a few reels all together like this would show more variance.

I’m sorry Rey that it has taken this long to get back to you about those Pineapple reflectors and lots more,
Really would like to speak with you about a post I saw somewhere in Nov 2016 I think, but can’t find it now, had to do with the Ti X6 extra left over parts, like when the knurling went bad, so what I read is that there was battery tubes with no knurling and heads I think without trit slots and a email to get a hold of a lady I think it was,
I am still sitting on my Ti X6 and wanted to get some of these parts also if possible, want to try what Dale did with flaming but want to practice on extra parts, also looking for about 4 of the old drivers from your ReyLight copper Lumintop back in January 16, if you still have those around it would be really great, and if possible about 10 of the 219CT’s here, and if I am not to late I will pay you for two reflectors for the Pineapple, might be way to late, had family issue and well a mess.
Does the current Pineapples at BG have the old reflector or new, or do you happen to know?
How do you think these Nichia’s would look in your Ti X6? …
That extra Ti parts post I read, it was about Nov. of 2016, it was not a normal thread like this page, I just can’t find it now, I’m sure there was an PP or email address for I’m thinking some lady Vivian…??
Does that name sound familiar.?
Might help if I ask if these Nichia’s are even still for sale?
Thank You Rey,
I sure do wish you’d do another ReyLight Copper Lumintop, with a new driver and these LEDs…!
That would be awesome, but must have ReyLight on them again, your getting way to famous now… and it was February of 2016 when you did the last ones.
Gary
Parts needed for,



Hi Gary,

Thanks. Sorry all Ti X6 were gone. Vivian was my colleague. Ledil Cute-3-SS might be too big for 219 Leds?
Pls PM me your shipping address, will ship you the reflectors, it’s free. If you need a tracking, you can pay 1.5$.
I had that thought about another run of copper AAA, but never made up my mind.

Regards
Rey

LED all gone.

Any timing for another reel?

Maybe higher output bin R9050 is available now… :disguised_face:

Hi Rey,
Sorry for not replying quicker than this, geez, what a day, well if anything I am always late so being no parts for the TiX6 is not much a surprise but I am surprised that I remembered your colleagues name, incredible if you knew me better Rey,
And I will get some money off to you quick for those reflectors, most likely in the morning, I need to buy a new computer, I got to type fast or it might just up and crook/die on me.
So yes, a new driver in a new AAA copper for Febuary, 2.2.2017 edition… ha ha, Banggood would sell a million of them for you, but you got to put ReyLight on the light like last time and besides a new driver maybe this or similar LED, this was a great one here, just loved the tint,
Thanks Rey take care…

[/quote]

And I will get some money off to you quick for those reflectors

[/quote]

Pls pm me your shipping address ASAP. Tomorrow is the only day I will ship.

And I will get some money off to you quick for those reflectors

[/quote]

Pls pm me your shipping address ASAP. Tomorrow is the only day I will ship.
[/quote]

Going right now, thanks Rey,

Thanks

Done, money sent, Thanks Rey,

Hi Rey
Are there any drivers left? If so I’d quite like one.

Actually I still have dozens of them. It is the old 2K Hz one. My bad.
Want to sell them cheap.

Well I managed to mess up the driver in my EagleTac D25A Clicky doing an emitter swap and I reckon yours is my best option for a replacement with dual chemistry support and a moon-mode even if it’s the 2 kHz PWM version. If ever you where to sell the new version separately I certainly would be very interested but in the meantime how cheap are you thinking? I might be able to use more than one.

Sorry I don’t have the newer ones for sale. 2K HZ is now 50% off 3$/pc.

I gathered as much.

Great I’ll take 3 then; I’ve sent the money to the PayPal in the OP and PM’ed you my shipping address.

Cheers

WWEFANS I sent payment via paypal for 3 drivers please. Also PM’ed you my shipping address.

Thank you,

Frank

Active again, pls check OP.

Are there any new drivers (with the higher PWM frequency) available?

Sorry, didn’t make any spare.

All right, can I still buy one of the older ones? Which modes have PWM again? The middle two?

Sorry, it’s not available now.