Cutter.au XHP35 HI E4, XHP50.2 K2 collective order of interesting Cree LEDs

Here i got some emitters that sound very interesting

XPL

XPL HD V4-5A2 4000K
https://www.cutter.com.au/proddetail.php?prod=cut1859

.

XHP35

XHP35 E4-3C 5000K
https://www.cutter.com.au/proddetail.php?prod=cut3023

XHP35 D2-5A3 4000K
https://www.cutter.com.au/proddetail.php?prod=cut2776

.

XHP50.2

XHP50.2 with highest K2 bin

XHP50.2 K2-3C 5000K
https://www.cutter.com.au/proddetail.php?prod=cut3287

XHP50.2 K2-1D 6500K
https://www.cutter.com.au/proddetail.php?prod=cut3284

.

7070 footprint

XHP70.2 N4-2B 6250K
https://www.cutter.com.au/proddetail.php?prod=cut2899

MTG2 P0 5000K
https://www.cutter.com.au/proddetail.php?prod=cut1675

.

CRI ones

XHP35 B4-1D 6500K CRI90
https://www.cutter.com.au/proddetail.php?prod=cut2758

XHP70.2 K4-3A 5000K CRI96
https://www.cutter.com.au/proddetail.php?prod=cut2897

Ok someone bought all of the W2-2B

and this just minutes before I checked out and got an message they are gone

so whoever has those 66 W2s give me an option to get a few for my own lights

LOL! Hopefully there will be more shortly

@Bocian has some 3B, may be willing to sale.

I am interested!

They also offer some very high-tech TIR lenses (although not in stock) - the large silicone Gaggione models (LLC56N7, LLC66N7). These produce a round spot without any spill! Moreso than normal TIR lenses.

Nice initiative!

” XHP70.2 K4-3A 5000K CRI96 ”
I would be very interested in more than 1 of this led, but looking at the Cutter page, are you sure it is a XHP70.2 and not XHP70 ?

the part number XHP70-20
and picture shows 70.2
as well they were recently added

I can ask them if its really a 70.2

No need to ask them, I just had difficulty reading the page. It is confusing that they have a dedicated XHP50.2 category, but the XHP70.2’s are listed under the XHP70 category , moreover the data sheet pdf that goes with the page is the XHP70 one.

Hi, I’m interested in this

XHP35 HI E4-3C 5000K
https://www.cutter.com.au/proddetail.php?prod=cut3023

but shipping cost to Spain is $60!

am I doing something wrong? is this collective order still running?

The highest bin for XHP35 HI is E2-3C

I got some of those
6.5€ per piece 1€ shipping

Interested, you’ve got a PM

E4 is still available on PCB:
http://www.cutter.com.au/proddetail.php?prod=cut3022

I had a guy from forum that lives a few km from cutter there like 70% of what is listed in the onlineshop is not in stock

the only 2 bins above D were
HD E4-1C
HI E2-3C

So this guy says that Cutter makes up their listings? That’s a strong accusation.

I can believe it, I have dealt with Cutter more than a few times! :person_facepalming:

I’m done with them, dealing with Cutter, well it’s like a box of chocolates, you just never know what your going to get! :frowning:

OK, Cutter has shown a fresh label of XHP35 HI E2.
If someone is willing to organise the collective order, I’m in for a couple.

I am in too… shipping to USA cost $32.

“XHP35 E4-3C 5000K” http://www.cutter.com.au/proddetail.php?prod=cut3023

What size is the star ? No information on the description.

edit : OK it is 20 mm.

There are no E4-3C

I am trying to get those 30 LEDs and shipping them for 1.2$ to members

I’m interested in two of those E2 xhp35’s