rizky_p
(rizky_p)
August 18, 2017, 2:42am
58
yeah Pete7874 also has the same spring problem, i notified Haikelite earlier and they are aware of the problem.
I opened the board from MT02 and MT01, i noticed that the solders are not flowed properly and the solder was rather dull no wonder you could crack the solder easily. i had to reflow that and replace the solder with a usual leaded solder plus a little flux and it was also only soldered on one side. I wish they could improved that, kind of ruined an otherwise a good quality light.
Gerrh
(Gerrh)
August 18, 2017, 3:42am
59
Put me down for one please.
rizky_p:
yeah Pete7874 also has the same spring problem, i notified Haikelite earlier and they are aware of the problem.
I opened the board from MT02 and MT01, i noticed that the solders are not flowed properly and the solder was rather dull no wonder you could crack the solder easily. i had to reflow that and replace the solder with a usual leaded solder plus a little flux and it was also only soldered on one side. I wish they could improved that, kind of ruined an otherwise a good quality light.
already added two sodering tin joints in all stocks to improve
nathan_nz
(nathan_nz)
August 18, 2017, 6:26am
61
I’ll take one, with an extra reflector if I can too so I can try both
X0R
(X0R)
August 18, 2017, 1:12pm
64
Interested depending of the price
DooMMasteR
(DooMMasteR)
August 19, 2017, 6:58pm
65
also depending on price, but definitely interested
cccpull
(cccpull)
August 20, 2017, 12:29pm
66
Already released, any updates?
freeme
(youtube.com/@1thedeals)
August 20, 2017, 12:36pm
67
Should be listed for sale next week.
rizky_p
(rizky_p)
August 20, 2017, 3:53pm
69
Freeme does the GB being approved yet?
Gerrit
(Gerrit)
August 20, 2017, 6:52pm
72
Hello Haikelite, I have dedomed my MT07 4S CW and it throws further than my NitecoreTM16GT
So I am very curious about this new concept.
jmpaul320
(jmpaul320)
August 20, 2017, 6:57pm
73
Hi Freeme - please add me to to the interest list
rizky_p
(rizky_p)
August 21, 2017, 3:25am
74
Well that i have to try. does the donut hole got worse?
Bruno28
(Bruno28)
August 21, 2017, 3:41am
75
Interested depending on price. Thanks.
Interested depending of the price
yasenf
(yasenf)
August 21, 2017, 4:27am
77
Interested depending on price.