MTN Electronics: LEDs - Batteries - Lights - Chargers - Hosts - Drivers - Components - 1-Stop-US Source

The D4 firmware is kind of a stripped down Narsil. Most noticable is it lacks memorized levels.

It would be better to ask if full Narsil was available.

Yes, but I would change the firmware so that it only uses the 7135 for moonlight.

---No offense to Tom, but I haven't been a big fan of Narsil's UI---too complicated. I played with it early on and it was a pain for me to figure out, so I could imagine the frustrated e-mails I was going to receive if I offered it on any drivers. I also haven't received many requests for it, so I never got around to optimizing it for any drivers. Maybe it has changed enough in the past year to change my opinion of it, but I will have to look at it again and see.

Richard,
Just want to confirm you are going to get some more of the button top Shockli?

Yes, we have hundreds on the way.

We also ordered more Aspire 18350s about three weeks ago, but I haven't heard anything about shipment yet. I am checking up with them (they were slow last time too).

you may also choose the TA 8+1+FET with NarsilM
I got 2 of em here right now
can be configured as you wish

Added D4 as an option on the 30mm FET+7135 and got it all tweaked for 2S. If there is enough demand for Narsil, I will add that as well.

Sounds good, I’ll keep an eye out for them.

Thanks

Plan on putting this in my S70S. Any forceen problems?

None that I can see except the size. The S70s is smaller than 30mm, but I can’t remember exactly what it was. 27mm or so.

What did you have to change for 2S? Could I get a copy?

From what I recall, it didn’t have code to handle voltage measurements on 2S, or at least the comments suggested that it might not work (and I didn’t try it).

Thank you for posting this Richard. I saw it and was able to make an order later that night for a green Nichia version. It was shipped the next day and received yesterday, so I had time to mess around with it over the weekend. Thanks again for such prompt and thorough service!

I honestly didn’t get all the hype behind this thing. I understand now…

Enable volt_mon_pin7 option, add tk-calibWight.h header, define 360K option, change ramping level tables, fix a few other broken references in the code. It's not clean enough for you to see it yet, but it is working. Let me get to cleaning it up, then I will share it.

In NarsilM you also have to disable Onboard_LED line

Richard, I read that you are ordering some S2+ hosts in desert tan and clear, but will you be stocking the desert tan flashlight with Biscotti?

Perhaps at a future date, but not in this order.

Can you add this to website please.

Priceless! :smiley:

(Remember, it is actually Richard’s wife Lisa that prints that receipt… just sayin)

Lisa says the price is $7.95.

Oh that’s too cool!

Any idea if/when any 1.6mm thickness drivers will be in stock again for 17mm or 20mm diameter?