[finished] Cree XHP35 HI E2-3C neutralwhite 12V, for Klarus XT11, XT12, G35; Truenite TN42; Acebeam K70

I got today 50 of those nice emitters.

6€
plus 1.2€ shipping
plus 2.5€ for tracking and 25€ insurance

Under UV orange

I have the information that Mountain Electronics E4-3C was most likely not real E4s, a BLF member did the purchase at cutter, their onlineshop is a disaster, wrong flux and bins are listed there they have not in stock at all.
They still have E4-3C on their webside, while a BLF member asking cutter for their highest flux bins for XHP35 gave only the result in HI E2-3C and HD E4-1C.

XT12GT @5m with cheap Luxmeter

1. measurement
“E4-3C” 2210 Lux —> 55250Lux@1m

new LED reflowed

2. measurement
E2-3C 3610 Lux —> 90250@1m

E2 is the highest flux bin for the XHP35 HI they have.

I’ve been doing business with Mountain Electronics for years and have got nothing but the highest quality goods from them. I don’t think they would have any part in deceptive selling, and are reputable business operators of the highest caliber.

Mountain Electronics stopped buisness with cutter because their wrong listings in their onlineshop

the only real way to get the right LEDs from them is go there in person and have a look at the wheels which a BLF member did for me

Looks like Richard did the right thing by severing ties with Cutter. You can see he wants to do right by his customers.

Totally missed this offer.
In case there are XHP35 left I would like to take 3.

I put a “D4” from mtnelectronics in my Acebeam K70 and didn’t lose any output. If anybody knows the original flux bin, that’s one data point.

And doesn’t that H in the code indicate 80 CRI? 80 CRI is definitely a selling point.

H is HI, 0 is HD

B 3. last letter says >70CRI

of course as NW the CRI is a bit better than 1A

Ahh. If it was Nichia, I’d know the product codes.

There are a lot of lights on the market these days that could use this an an upgrade. Acebeam in particular has been using a lot of 7000K XHP35 HI, and that just won’t do. Fortunately, Acebeams are really easy to swap.

Thanks Lexel for clarifying this mess with Cutter - I've been strongly critical of them, though I think Cutter's intent is good, just their organizational skills is severely lacking, and they are not well suited for Int'l online sales. I made a couple fairly large purchases from them in the past, and it's been very difficult communicating with them.

Are you still selling these, overseas? US?

Shipping is worldwide
I got about 30 left

If you buy more than a few tracking with 25€ insurance is strongly recommended

I have now estimates for the Mountain-Electronics “E4-3C”, which cutter sold em with wrong flux bin, compared to real E2-3C, I am selling here

XT12GT @5m with cheap Luxmeter

1. measurement
“E4-3C” 2210 Lux —> 55250Lux@1m

new LED reflowed

2. measurement
E2-3C 3610 Lux —> 90250@1m

did not charge the battery as its a boost driver

bump 26 left

Bump

I’ll take 2 please! I’ll try them out.

Thanks for the heads up, I got burned on some W2’s that were not W2’s! So I got double burned because I got the XHP35 HI E4-3C’s too!
:rage:

yhpm

you got a PM

So do you! :wink:

Thanks for quick shipment :slight_smile: