FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

@the Miller
well the other way is you can flash Anduril always on the Q8.
And if TK get a driver from the GT I guess there it will run on the GT

Right joe, and so will mine. :wink:

2 things come to mind here, from what The Miller said up above. “So please stop telling yours in regards to firmware for in this case it is only up to Fritz, Tom and TK…” First, this forum doesn’t exist, nor does this thread, so one can tell others what to or not to say. And secondly, BLF is widely known for divergence within a thread, we have always and shall continue to always speak our minds here, for this is how ideas grow into fruition and Qlite drivers morph into FET drivers. I am happy to have been a part of all that and salute the Comfychair’s, MattAus’s, Wight’s, RMM’s, ChicagoX’s, PilotDog68’s, WarHawk’s, Old-Lumens’, MRsDNF’s and everyone else that have changed the face of flashaholism here at BLF. And in the immortal words of Foy, (with some Justin thrown in for good measure) Itiswhatitisandthat’swhatmakesusspecial!

To throw in an unsolicited third thing, it’s up to all of us, the flashaholic consumers, for no matter what the only way it flies is if we buys. :wink:

I truly do understand where you’re coming from Wim, and I know how complicated and confusing the massive threads can be, but when you run open, you invite it to be so, it’s really that simple. The alternative is to develop it behind closed doors and have it produced, then offer it for sale to the public, like we see from virtually all others. But then, it wouldn’t be special and couldn’t be a BLF Limited Edition, could it?

Edit: And for the record, I’ve been using ToyKeeper’s ramping for a looooong time before y’all thought up the soup can light. :wink: Over 3 years ago. So ramping wasn’t introduced in the Q8, and Comfychair had it back in 2014 as well, I’ve been flashing theirs onto morphed 07N07 equipped FET drivers since the beginning.

2x on list plz, ty

Dale I know what you say and sure asking to let something go can have the opposite effect.
You know I would not Dale to forbid anything ecsn if I could heheh.
But before a lot of people wanted to express their preference I had to ask for some restraint , be ause we take all serious, whether it comes from a seasoned veteran or a new member.
The OP is clear we state Narsil, and now all know TK is involved too so if it changes it will be made clear at that time, there is thus no need to express a different wish then Narsil now. Want something in Narsil, post in the Narsil thread, want something in Anduril, post in the FSM thread :wink:

Yes of course ramping was not invented and first brought to us via Narsil or the Q8, the ramping was implemented in Narsil because of the Q8, so it is a relatively new feature of Narsil and as such could use some user alterable config settings to bring it on par with the modes, but that is again up to Tom.

Hehe didnt even know I asked for 2 but see I am twice on the list.
Was going to ask for a second one anyways so its fine :wink: thanks

EDIT: I did ask 2 times haha. Seems I want it that bad

565 rayman007
651 rayman007

Sorry, it was a long day and I had no wine. :cry:

Please add my name to the list.

Please add me to list - thanks

I thought that your post made a lot of sense even without the wine :slight_smile:
ButI agree it may be time for drinks, I’m on Cherry Coke for now, maybe some port wine later this evening.

I agree with every thing you said .Even though I wasn’t listening

1 for me please.

It’s just such an innate beauty, so simple and yet so well done…

Could you please add me to the list for 2? Thanks

Dale as I understand it comes in clear like fresh from the lathe.
These parts are blasted.

( I think I am more on the blasted part)

From appearance, the inner tube is raw. Anodizing is an acid bath under electrolysis, it eats into the surface of the aluminum. As such, a mirror finished part becomes dull, or at least no longer mirror finished. So the shiny inner tube I was assuming to be raw aluminum. At any rate, it LOOKS raw and lovely. :slight_smile:

Yep will update list later.

It was kind of hard to explain the clear ano thing.
We had seen Neal’s pics of the GT proto with his clear Convoy C8 (so nice Neal is a flashoholic :smiley: ) so we said like that.

Please put me down on the list for 2 :slight_smile:

Please put me down for 1 of these Awesome Designed Lights too. :slight_smile:

Yes will do.

put me down for 1! Thanks!