Holding the button while connecting power might be a good way to reset to factory defaults, for example. That’s a thing which isn’t implemented at all right now, and hold-at-boot is probably the easiest way to do it. But I don’t know what would be the best UI choice for hold-at-boot.
I love that idea, have a specific, easy action such as hold-at-boot to reset to factory options would be awesome. Also I think a simple but to reset from muggle mode should be sufficient, not too hard to hand to someone and say use it but don’t open it to look at the inside. My understanding of a muggle mode is simple use for a short period of time, perhaps in an emergency, when you don’t have time to explain the whole UI so the person shouldn’t be playing around with it anyway.
Oh wauw, just 12 new posts here, been of line for a week or so, see tat the thers have exploded, this is nice to kick off with
Will update the list later
Oh wauw, just 12 new posts here, been of line for a week or so, see tat the thers have exploded, this is nice to kick off with
Will update the list later
Please remove me from the list, I have no interest in low CRI lights with unspecified emitter parameters anymore. The XP-G3 also has a very ugly beam, as I’ve seen IRL, with green tint-shift and a blue-UV corona.
You won’t need to be removed from the list. Just don’t do what is required when payment is required and it will be understood that you don’t want the light. No big deal.
Perhaps muggle mode could use the ramping but limited to the single 7135 channel? Could be a training mode for using the UI, and useful for experienced users in a long term blackout situation should you need maximum runtime.
About reset using connecting power while holding the switch, this might be difficult for people with arthritis. Just a thought.
Add me to the list for one please. I need a new EDC, one that is shorter that my current Convoy S2.
Thanks!
-Garry
Maybe get two, snowblower season is just around the corner.
You remembered my lost EDC from 4 years ago Wow! Good memory! Actually, I’ve not lost it again since. I’ve just changed from keeping it in my front pocket to my rear and the longer tube causes it to be pushed up and out of my pocket. (I’ve had to move it to my rear pocket since phones are getting so darn big – too big to accomodate a flashlight in the same pocket.)
NOTE: Moving my photos from PhotoBucket to Flickr. PM me or post in the thread if you can’t see my images and need me to fix or send a gallery link. PhotoBucket images should remain visible until November 2018.
Perhaps muggle mode could use the ramping but limited to the single 7135 channel? Could be a training mode for using the UI, and useful for experienced users in a long term blackout situation should you need maximum runtime.
About reset using connecting power while holding the switch, this might be difficult for people with arthritis. Just a thought.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
Do you mean in mode sets?
I think in ramping mode you can’t turn off memory.
Well, I guess muggle mode is a seperate thing?
The mugliest of muggle modes, one level, 400 to 500 lumens.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
Do you mean in mode sets?
I think in ramping mode you can’t turn off memory.
Well, I guess muggle mode is a seperate thing?
The mugliest of muggle modes, one level, 400 to 500 lumens.
I imagine if they made ramping part of muggle mode, no memory could be done. Hold to ramp, or single click to go straight to a 150-300 lumen mode.
Add me to the list for one please. I need a new EDC, one that is shorter that my current Convoy S2.
Thanks!
-Garry
Maybe get two, snowblower season is just around the corner.
You remembered my lost EDC from 4 years ago Wow! Good memory! Actually, I’ve not lost it again since. I’ve just changed from keeping it in my front pocket to my rear and the longer tube causes it to be pushed up and out of my pocket. (I’ve had to move it to my rear pocket since phones are getting so darn big – too big to accomodate a flashlight in the same pocket.)
-Garry
Well, who could forget? That was a pretty traumatic thread for all of us here. A faithful little flashlight sent into the maw of an evil snowblower.
Perhaps muggle mode could use the ramping but limited to the single 7135 channel? Could be a training mode for using the UI, and useful for experienced users in a long term blackout situation should you need maximum runtime.
About reset using connecting power while holding the switch, this might be difficult for people with arthritis. Just a thought.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
You wouldn’t have 5 seconds to say “Hold the button to adjust the brightness” as you hand the muggle your flashlight?
Add me to the list for one please. I need a new EDC, one that is shorter that my current Convoy S2.
Thanks!
-Garry
Maybe get two, snowblower season is just around the corner.
You remembered my lost EDC from 4 years ago Wow! Good memory! Actually, I’ve not lost it again since. I’ve just changed from keeping it in my front pocket to my rear and the longer tube causes it to be pushed up and out of my pocket. (I’ve had to move it to my rear pocket since phones are getting so darn big – too big to accomodate a flashlight in the same pocket.)
-Garry
Well, who could forget? That was a pretty traumatic thread for all of us here. A faithful little flashlight sent into the maw of an evil snowblower.
Or just me?
After losing one to the snow, and finding it months later (it wasn’t in the snow at all), all of my pocket lights either come with a properly fitted pocket clip (that I use) or I won’t buy it. My brother lost the exact same light and refound his also. He also uses the pocket clip now.
Perhaps muggle mode could use the ramping but limited to the single 7135 channel? Could be a training mode for using the UI, and useful for experienced users in a long term blackout situation should you need maximum runtime.
About reset using connecting power while holding the switch, this might be difficult for people with arthritis. Just a thought.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
You wouldn’t have 5 seconds to say “Hold the button to adjust the brightness” as you hand the muggle your flashlight?
Thus begins the slippery slope of turning the muggle mode into a full fledged UI with a learning curve. Sure, we think it’s simple, but to most “it’s just a flashlight” and shouldn’t be so complicated. If it didn’t have memory it would act as a single mode muggle light, but with the bonus ramping UI for those who may be more interested in it.
Please put me on the list for 2
Please put me down for 2
Hi Miller, I am interested for 2 units.
I love that idea, have a specific, easy action such as hold-at-boot to reset to factory options would be awesome. Also I think a simple but to reset from muggle mode should be sufficient, not too hard to hand to someone and say use it but don’t open it to look at the inside. My understanding of a muggle mode is simple use for a short period of time, perhaps in an emergency, when you don’t have time to explain the whole UI so the person shouldn’t be playing around with it anyway.
Perhaps that’s just my thought though
Oh wauw, just 12 new posts here, been of line for a week or so, see tat the thers have exploded, this is nice to kick off with

Will update the list later
It is done when it is done

How my BLF Specials generally work, please read before asking Qs
The Q8, Exciting a groupbuy for a Premium BLF special high lumens soda can light!
The GT, A BLF special GIGA thrower
The FW3A, a TLF BLF special small, elegant, powerful triple
Lithium Ion safety 101 important read
Sorry grammarlovers, I am a real King Typo.
Welcome back buddy, I hope you are well
Yes, but swamped, and tired for the window of work I need to do is closing with the cold getting worse every week
It is done when it is done

How my BLF Specials generally work, please read before asking Qs
The Q8, Exciting a groupbuy for a Premium BLF special high lumens soda can light!
The GT, A BLF special GIGA thrower
The FW3A, a TLF BLF special small, elegant, powerful triple
Lithium Ion safety 101 important read
Sorry grammarlovers, I am a real King Typo.
I’m interested in a unit
Put me Down for one please.
This is my first groupbuy ever. Do i pay now or later?
Thanks
Please put me down for one.
Once the light goes into production, 2018, you will get a PM with all the details. For now we wait.
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread with XHP70.2, TA FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.
Supfire L5-S thread with XHP70.2, TA FET driver, NarsilM v1.0 ramping UI, 2 x 26350 cells, lighted side switch. My mini L6!
Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.
10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices
Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results
Please add me to the list for one.
Please remove me from the list, I have no interest in low CRI lights with unspecified emitter parameters anymore. The XP-G3 also has a very ugly beam, as I’ve seen IRL, with green tint-shift and a blue-UV corona.
I am kinda feeling ferongr’s sentiments. Will the MCPCB be easily replaceable with a Noctigon 3XP board?
You won’t need to be removed from the list. Just don’t do what is required when payment is required and it will be understood that you don’t want the light. No big deal.
pls add me to the list for one
ken
Perhaps muggle mode could use the ramping but limited to the single 7135 channel? Could be a training mode for using the UI, and useful for experienced users in a long term blackout situation should you need maximum runtime.
About reset using connecting power while holding the switch, this might be difficult for people with arthritis. Just a thought.
Maybe get two, snowblower season is just around the corner.
Put me in for a one, thanks
Wow, that’s super neat. Put me on the list, I’m definitely interested in buying one.
You remembered my lost EDC from 4 years ago Wow! Good memory! Actually, I’ve not lost it again since. I’ve just changed from keeping it in my front pocket to my rear and the longer tube causes it to be pushed up and out of my pocket. (I’ve had to move it to my rear pocket since phones are getting so darn big – too big to accomodate a flashlight in the same pocket.)
-Garry
My Bike Lights Thread, Optics (TIR) Comparison Beamshots, Diffusion Techniques
NOTE: Moving my photos from PhotoBucket to Flickr. PM me or post in the thread if you can’t see my images and need me to fix or send a gallery link. PhotoBucket images should remain visible until November 2018.
That’s a great idea, but single click to turn on should always (no memory) go directly to a “useful” general use mode so anyone could pick it up and use it.
Do you mean in mode sets?
I think in ramping mode you can’t turn off memory.
Well, I guess muggle mode is a seperate thing?
The mugliest of muggle modes, one level, 400 to 500 lumens.
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread with XHP70.2, TA FET driver, Narsil v1.2 ramping firmware (old), lighted side switch, SMO reflector.
Supfire L5-S thread with XHP70.2, TA FET driver, NarsilM v1.0 ramping UI, 2 x 26350 cells, lighted side switch. My mini L6!
Thorfire S70S with MTN FET driver, RampingIOS (D4) and custom lighted side switch.
10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, Astrolux S43 and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices
Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results
I imagine if they made ramping part of muggle mode, no memory could be done. Hold to ramp, or single click to go straight to a 150-300 lumen mode.
hi, i am interested too)
Well, who could forget? That was a pretty traumatic thread for all of us here. A faithful little flashlight sent into the maw of an evil snowblower.
Or just me?
You wouldn’t have 5 seconds to say “Hold the button to adjust the brightness” as you hand the muggle your flashlight?
After losing one to the snow, and finding it months later (it wasn’t in the snow at all), all of my pocket lights either come with a properly fitted pocket clip (that I use) or I won’t buy it. My brother lost the exact same light and refound his also. He also uses the pocket clip now.
Isn’t muggle mode 4 mode next memory mode including strobe and SOS?
Pages