Useless but mandatory build ;-)

Never useless, i learn from all projects!!! Share more pics, info, build tips if you wish :+1:

+1

i will go out tonight and share a video and beamshots ! :wink:

that’ t actually pretty simple build.
Each 100W array is feeded with a BOOST DC module (3$ ebay) because i use a 6S lipo battery (24V) and each array need 33V.
I also use a drone PDB board to solder everything and have a 12V mini psu for the OMRON SSR (12 Vdc coil) and for the 4 heatsink fans running at 12Vdc

I’ll compare that to the MT03 and MF01 tonigh. That’s floody light.

i put manual setting with very low luminosity to get the 400W shot not over exposed…

MF01 TA driver modded >10000lm

MT03 TA driver modded>10000lm

400W array light

Video uploading….please wait

You are one clever crazy person mizou51. :+1:

AWESOME!!! The wall of light from that thing is INSANE!

Cool :+1:

Way cool :+1: this is the kind of build you would regret not doing…

Now thats a white out. :laughing:

Very cool build, but it deserves better leds than these, are planning to upgrade to seriously good leds?

You are right

Do you have any link with affordable array?

:+1: The board you built it on looks a lot like a kitchen cutting board. That gives the term “breadboarding” new meaning. :wink:

I hope that terminology “breadboarding” does not get lost in the transition to other countries / languages / ….

I’m sorry, I’m not into these type of leds, perhaps anyone else has an advice?

thanks I enjoyed that video :+1:

Nice 4 eyes you have built. I am thinking to build something that is 4 heads too.

yeah

you can do something smaller but i did the quickest way…just to try it.
IT would be better to use a lipo that is closed to 30V

Improvment could be
serial lipo 3S+4S to get 30V so small boost up to 33V
better quality LED array

Ya, power supply is the one must be taken care. I thought about buying those cheap booster or buck circuit too. You have heatsinking taken care of, just the run time a bit short though, so upgrade to 7s will help.

Lol, i’d actually enjoy seeing some translations for that one lol!!