Better? Maybe not. Different and totally unique? Heck yes.
As an aside. I really want to know how a tapered tube is viewed as such a downgrade to this light by some. Yes, the prototype was a parallel/square design, but what is special about that otherwise?
The blasted finish though I can see takes away from the raw look.
Since i still dont have an Emisar D4, i think i have to buy one, why would the FW3A be better?
Why is the FW3A better? Slightly smaller, lighter, nicer clip, metal tail switch, higher regulated modes, cheaper (probably), much fancier firmware.
Why is the D4 better? Sturdier, more emitter/optic/host choices, rubber side switch, higher turbo modes, available today, also comes in throwy D1/D1S flavors.
Thank you for pointing that out TK, i find it difficult making choices, it seems the grass is always greener somewhere else
—
Thijsco19 wrote:
a regular symptom of flasholism
“Flasholism is the most severe form of flashlight use and involves the inability to manage your flashlight use habits. It is also commonly referred to as flashlight use disorder. Flashlight use disorder is organized into three categories: mild, moderate and severe. Each category has various symptoms and can cause harmful side effects. If left untreated, any type of flashlight use can spiral out of control.”
The original design is more of a fresh off the lathe custom look, this new one is more of an artsy matte bead blasted look.
To be honest, I’m not sure if I’ll go for this light when it is released with the current design.
I really like them both too. I’m not sure which I like better to be honest. I think the original may be prettier and the new may be more practical. I can think of positives to both, but not negatives. I’d really get both, but I’m 100% in for either. Merry Christmas all!
The Miller has just returned from a 5 week absence, so the list has not been updated. It will be soon.
—
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
I love the tapered design much more, and I like both finishes. I think Nichia’s (cheaper than XP-G3) would make a better choice for most people, with a $10 up charge for XP-L HI. I know it’s not likely, but a few options of temperature would be nice as well. So far the emitter choice seems to be the only downside to this light.
Better? Maybe not. Different and totally unique? Heck yes.
As an aside. I really want to know how a tapered tube is viewed as such a downgrade to this light by some. Yes, the prototype was a parallel/square design, but what is special about that otherwise?
The blasted finish though I can see takes away from the raw look.
If you get right down to it, the tapered tube is much better for pocket carry…. nothing to hang up when taking out of pocket.
You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"
Texas Lumens Flashlights <> M4D M4X Deals : sign up - save $$$$ ||||
Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU Flashaholic? Need Professional Help???
/\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal
I’d like to be put on the list for 1
Please put me on the list for one as well, thanks!
Why is the FW3A better? Slightly smaller, lighter, nicer clip, metal tail switch, higher regulated modes, cheaper (probably), much fancier firmware.
Why is the D4 better? Sturdier, more emitter/optic/host choices, rubber side switch, higher turbo modes, available today, also comes in throwy D1/D1S flavors.
Thank you for pointing that out TK, i find it difficult making choices, it seems the grass is always greener somewhere else
Thijsco19 wrote:
a regular symptom of flasholism
“Flasholism is the most severe form of flashlight use and involves the inability to manage your flashlight use habits. It is also commonly referred to as flashlight use disorder. Flashlight use disorder is organized into three categories: mild, moderate and severe. Each category has various symptoms and can cause harmful side effects. If left untreated, any type of flashlight use can spiral out of control.”
Doug S.
Just buy both and you’ll be fine
The original design is more of a fresh off the lathe custom look, this new one is more of an artsy matte bead blasted look.
To be honest, I’m not sure if I’ll go for this light when it is released with the current design.
-the- Throw calculator - Pulsars list
I guess to each his own.
I’m in for either one.. but would not be dissapointed one bit with the latest design. Personally….. I think it looks great.
You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"
Texas Lumens Flashlights <> M4D M4X Deals : sign up - save $$$$ ||||
Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU Flashaholic? Need Professional Help???
/\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal
I really like them both too. I’m not sure which I like better to be honest. I think the original may be prettier and the new may be more practical. I can think of positives to both, but not negatives. I’d really get both, but I’m 100% in for either. Merry Christmas all!
I’d like to have one of these lights too please.
Merry Christmas all !
MARRY CHRISTMAS EVERYONE!!!
Doug S.
Please add me to the list for 1.
Merry Christmas Major, and to all other BLFers as well!
I’m liking the prototype!
Please put me down for a second FW3A.
Any chance of those pocket clips being available separately? I’d buy a handful. They look like a great fit for the Emisar line.
Please add me to list!
Oh, what the heck...
Add me to the list as well.
[31 knives for sale=USA only] Minimum order size slashed!
(Deadline = every Thursday @ 11:59PM PST) ☮♫☯
Please add me to the list for two lights
Please add me to the list
fwiw, love the new tapered look.
The Miller has just returned from a 5 week absence, so the list has not been updated. It will be soon.
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
10 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66
Texas_Ace BLF Calibrated Lumen tube
Maukka Calibration Lights for DIY Lumen Measuring Devices
Review Jaxmnve M1 Stainless 10180 Keychain light
Take me off the interest list, please. I thought we were signing up for this.
You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"
Texas Lumens Flashlights <> M4D M4X Deals : sign up - save $$$$ ||||
Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU Flashaholic? Need Professional Help???
/\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal
please put me on the list for 3!
Welcome to BLF sarten350 and Merry Xmas to our newcomer and whole BLF family.
Post # ….
Google translator
Hasta que Miller se recupere
O hasta que alguien me reemplace
Gran dificultad por idioma
Yo uso el traductor de Google
Sorry for my bad English
(google translator)
I love the tapered design much more, and I like both finishes. I think Nichia’s (cheaper than XP-G3) would make a better choice for most people, with a $10 up charge for XP-L HI. I know it’s not likely, but a few options of temperature would be nice as well. So far the emitter choice seems to be the only downside to this light.
There’s another thread for that one.
http://budgetlightforum.com/node/54239
crz6662, this is that thread. SkittleStoat is reffering to the change in host design.
Personally, I prefer the old design, but as long as the light works as it is supposed to work, I’m in.
Add me for 1 please.
Pages