BLF GT custom handle bracket kit. (DBCustom approved. Post #121)

150 posts / 0 new
Last post

Pages

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA
BLF GT custom handle bracket kit. (DBCustom approved. Post #121)

We have a proto. Some changes will be made as far as some more rounding of corners and tweaking here and there for a slightly sleeker look. The handle was also intended to be .750” stock but I only had .625” on hand.

The production version would be anodized black and I have an idea to add some grip as well.

The ergonomics work for me but could be tweaked as I let others with different sized hands check it out. The switch is easily reached with my thumb.

Edit: My intention is for this batch to still be for CONUS as I have no experience with international shipping. However if there is enough interest and the shipping fees aren’t outrageous something may be able to be worked out.

Anyway… here’s some pictures for you.









Edited by: Turningbluechips on 02/05/2018 - 22:22
nitro
nitro's picture
Offline
Last seen: 3 months 5 days ago
Joined: 05/22/2011 - 13:32
Posts: 2701
Location: ohio

I’m going to use something like a paintball gun handle $8 total but I’ll keep a eye on this

Kalihi
Offline
Last seen: 23 hours 54 min ago
Joined: 07/30/2016 - 03:01
Posts: 94
Location: Hawaii

I’m interested to see what you come up with.

Litefighter
Litefighter's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 04/19/2017 - 20:39
Posts: 131
Location: California

I’m interested.

ARsee
ARsee's picture
Offline
Last seen: 1 week 1 day ago
Joined: 02/19/2017 - 13:16
Posts: 1140
Location: Right here

The GT already weighs a bunch, and I've yet to receive mine. Once I get one sitting on my desk, then my thoughts will kick in gear.

Tag for your further input, OP.

Wrathbringer27
Wrathbringer27's picture
Offline
Last seen: 5 hours 52 min ago
Joined: 03/02/2015 - 09:00
Posts: 1936
Location: Singapore GMT +8

Would love to see protos!

Words can be broken,
so can bones.

emarkd
emarkd's picture
Offline
Last seen: 45 min 40 sec ago
Joined: 04/14/2015 - 22:04
Posts: 1450
Location: Georgia, USA

Yeah I’d have to see a lot more, at least a sketch or mock-up, to really commit. But I’m at least interested…

byarnell05
Offline
Last seen: 1 hour 28 min ago
Joined: 09/13/2011 - 02:32
Posts: 64
Location: Washington

Get some prototypes or 3D renders and I might be interested.

DarthTader
Offline
Last seen: 3 months 2 weeks ago
Joined: 12/02/2016 - 09:56
Posts: 35

Interested!

twodollarbill
Offline
Last seen: 1 day 32 min ago
Joined: 01/30/2017 - 11:57
Posts: 21

I’m with the others, more details will help, but you’ve got me interested.

netprince
Offline
Last seen: 1 hour 31 min ago
Joined: 06/14/2012 - 13:48
Posts: 335
Location: Virginia

I’m interested… I’d guess as more people start receiving their GT lights interest could increase.

goshdogit
goshdogit's picture
Offline
Last seen: 41 min 50 sec ago
Joined: 12/03/2015 - 21:28
Posts: 535

Nice! I’m looking forward to learning more about your idea.

Will your handle resemble this style?

I posted my findings about those offered by several manufacturers, but none are the proper size for the GT’s tube diameter.

Could your design incorporate a ‘quick-release’ attachment to make it removable without tools?

The GT’s center of mass is at the switch. Will your design account for this?

Good luck with your design process and keep us posted! Thumbs Up

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA

goshdogit wrote:
Nice! I’m looking forward to learning more about your idea.

Will your handle resemble this style?

I posted my findings about those offered by several manufacturers, but none are the proper size for the GT’s tube diameter.

Could your design incorporate a ‘quick-release’ attachment to make it removable without tools?

The GT’s center of mass is at the switch. Will your design account for this?

Good luck with your design process and keep us posted! Thumbs Up

My current plan is to use the tripod mounting hole as the attachment point so the balance should work out pretty well. I won’t have much else in the way of details until I start cutting metal.

thslw8jg
Offline
Last seen: 2 days 22 hours ago
Joined: 10/05/2013 - 05:21
Posts: 23
Location: Gulf Coast

Interested in 1-2 handles

seery
Offline
Last seen: 1 day 23 hours ago
Joined: 12/23/2015 - 12:31
Posts: 105
Location: At the bottom of a hill

Interested.

Looking forward to drawings and/or prototypes.

2Grumpy
Offline
Last seen: 16 hours 46 min ago
Joined: 01/05/2018 - 05:04
Posts: 11
Location: United States

Interested in 2 if I like the design.

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA

Ok. My week has been an absolute hell thus far. Let’s just say water and sub freezing temps don’t play nice together, but there’s good news. Things are seemingly back to normal and come hell or (more) high water I’ll have a prototype and some pictures for you guys tomorrow. If I have to put a little overtime and Baron has to cross his legs for a little while so be it…

I’ve also gotten approval that a batch of 50 would be acceptable. However, more would be better (cheaper) for the customer.

Yourrid
Yourrid's picture
Offline
Last seen: 4 days 19 hours ago
Joined: 05/17/2013 - 09:41
Posts: 722
Location: NE ATL

I’m definitely in for one. I wish we had discussed a handle to be included with the GT from the beginning. This thing is huge!

emarkd
emarkd's picture
Offline
Last seen: 45 min 40 sec ago
Joined: 04/14/2015 - 22:04
Posts: 1450
Location: Georgia, USA

I think as more and more folks get ahold of these things and find out how freakin’ huge they really are, a lot of us are going to be looking for something like what you’re talking about here. But to really get much attention you’re going to need something for folks to see. A physical prototype would be ideal, but at the minimum you need some sort of render or sketch before too many folks are going to be getting in line. I hope you work it out though.

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA
emarkd wrote:
I think as more and more folks get ahold of these things and find out how freakin’ huge they really are, more and more folks are going to be looking for something like what you’re talking about here. But to really get much attention you’re going to need something for folks to see. A physical prototype would be ideal, but at the minimum you need some sort of render or sketch before too many folks are going to be getting in line. I hope you work it out though.

By this time tomorrow you’ll have pictures of the real thing attached to the light.

AlexGT
AlexGT's picture
Offline
Last seen: 2 hours 11 min ago
Joined: 06/07/2012 - 17:39
Posts: 3618
Location: Texas

Interested depending on design…

emarkd
emarkd's picture
Offline
Last seen: 45 min 40 sec ago
Joined: 04/14/2015 - 22:04
Posts: 1450
Location: Georgia, USA

Turningbluechips wrote:

By this time tomorrow you’ll have pictures of the real thing attached to the light.

Nice, looking forward to it!

Mr.Scott
Offline
Last seen: 3 days 17 hours ago
Joined: 02/13/2016 - 00:26
Posts: 555
Turningbluechips wrote:
By this time tomorrow you’ll have pictures of the real thing attached to the light.

Eagerly awaiting your prototype. Interested.

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA

More pics to come later tonight.

seery
Offline
Last seen: 1 day 23 hours ago
Joined: 12/23/2015 - 12:31
Posts: 105
Location: At the bottom of a hill

When you post the pics, are you OK with us being 100% honest with our opinions?

Turningbluechips
Turningbluechips's picture
Offline
Last seen: 6 days 7 hours ago
Joined: 02/14/2016 - 15:17
Posts: 353
Location: PA
seery wrote:
When you post the pics, are you OK with us being 100% honest with our opinions?

I’m not thin skinned my friend. No worries. Just be warned, I may be 100% honest back… LOL.

seery
Offline
Last seen: 1 day 23 hours ago
Joined: 12/23/2015 - 12:31
Posts: 105
Location: At the bottom of a hill

Turningbluechips wrote:

I’m not thin skinned my friend. No worries. Just be warned, I may be 100% honest back… LOL.

Haha! I wouldn’t expect anything less!

ARsee
ARsee's picture
Offline
Last seen: 1 week 1 day ago
Joined: 02/19/2017 - 13:16
Posts: 1140
Location: Right here

Fixed it for ya.

More pictures of the handle, than the light please.

sherman2k
Offline
Last seen: 4 days 18 hours ago
Joined: 01/03/2018 - 00:46
Posts: 81
Location: California

Interested

G0OSE
G0OSE's picture
Offline
Last seen: 1 day 6 hours ago
Joined: 09/03/2014 - 12:34
Posts: 429
Location: uk

Ok, I’m in the UK and can’t / won’t be buying one, but I have some suggestion if that’s ok?
For the handle, how about making it so that a mtb handlebar grip would fit on it? then it could be chosen by the new owner and would be unique – they are mega cheap too,come in leather, rubber, gel, foam etc etc.
Would also be good for colder climates. Maybe even get them anodised if it wasn’t massive hassle? Being an engineer I guess you may know a ‘plater’ anyway?
like these for example -

Nev
Offline
Last seen: 1 hour 45 min ago
Joined: 04/06/2017 - 07:50
Posts: 207
Location: U.K.

Turningbluechips wrote:

More pics to come later tonight.


No offence ,just being 100% honest , I don’t like it , it looks odd ,it looks like something found at the back of the shed & it’s just makeshift until a proper one can be made.

Pages