I would prefer a better quality with a slower shipping time.
I just bought 8 new lights over this past month. With that said, I’m in no hurry to get chewed out by my wife for buying another flashlight…! Especially one that’s not gonna be easy to hide…
Just glad to be in on the group buy list and looking forward to making payment!
Take your time Lumintop, the better the quality the more you will sell down the road!
It should be pretty easy to check for power on the led. Just set your DMM to DC volts and probe the rear of the switch pcb on the black and white wires. You should see 2.18v. The white wire is ground and the black wire is for the switch leds. (The red wire is for the e-switch and has 5v to it)
If you see no voltage, then it’s possible your black wire to the switch came loose or the firmware is not sending the signal out. Maybe yours is set to off by default? You could make sure the settings are turned ON. You can see on the bottom of page 6 in the GT manual that there are 3 options.
If you DO see voltage, the software is working fine and it might be your tiny resistor by the leds not making good contact.
Here are some pics.
If you don’t feel up to checking it, I would PM Texas_Ace about getting it fixed (assuming it bothers you).
I haven’t heard anything. The shipments from the 27th and 3rd where just DHL because they where on pallets. This shipment on the 9th seems to have a wide variety of destinations. All we have to go by is people posting here about their orders.
That is awesome, Richard is the best! Not an option for us in the rest of the world because of expense I’d say (but yes, he does do international shipping usually), but then again, I’d much rather have a warmish neutral than a coldish one…
Wouldn’t mind 5000k, but doubt I’ll think it’s worth the trouble to change the LED when the light arrives.
I’m didn’t receive the GT at this moment. It’s my brother Megabassie. I hope mine will arrive today. Keep you updated. We can conclude that the European shipment of Saturday has reached Europe, but not all addresses.