DB_Custom
(Dale)
January 12, 2018, 4:15pm
15547
Y’all make the reflector plating process sound simple. It’s not. The final finish used won’t stick to the raw aluminum as machined, so what appears to be brass is applied first. This fills the machining marks, normally, and leaves a more perfect finish for the final reflective coating. (Yes, I’ve hand sanded the coatings off down to bare metal too many times) At any rate, the people who make reflectors specialize in it, pretty sure they know what they’re doing.
As a modder, I detest plastic reflectors. If I know up front that a light has a plastic reflector I choose not to buy it.
JasonWW
(JasonWW)
January 12, 2018, 4:23pm
15548
In case anyone missed it, I’ll probably repost this every now and then.
I have some news on emitter swaps.
I talked to Richard at Mountain Electronics (RMM on these forums and a sponsor here) and told him there might be more than a few guys with GT’S interested in swapping to a cooler tint. He says that if you send in your stock mcpcb to him and buy one of his new XHP35-HI emitters, he will reflow it for free! He has 2 choices right now, 5,000k and 5700k tint. They are both the same D4 brightness bin as the stock GT 4000k emitter.
The cost of both are under $8, plus the shipping cost there and back. I’m in Texas and shipping a small package from him is usually $2 to $3. So I would estimate the entire cost at under $15.
From his store:
BLF GT LED SWAP
Don’t like the tint of your BLF GT XHP35 HI? Send us your MCPCB and we’ll swap it for this one.
Please ship your BLF GT MCPCB to us and we will swap it, test it, clean it, and send it back to you.
Your entire order will not ship until we receive the LED and get it ready to ship.
Ship to:
Mountain Electronics LLC
8076 S. Box Canyon Rd.
West Jordan, UT 84081
Here is the link to the 5000k.
Here is the link to the 5700k.
If your outside of the USA, then I’m not sure what shipping would be or if he even does international shipping. You’d have to contact him for details.
JasonWW
(JasonWW)
January 12, 2018, 4:33pm
15549
Sirking strikes again! Lol
drood
(drood)
January 12, 2018, 4:35pm
15550
For best results, tens to hundreds of Al layers are needed. As the last layer of aluminum, SiO2 is used. It’s better than silver.
Oh great, how relevant. Benefits of cucumber in a giant throw forum built flashlight thread.
Bloody spam.
Nev
(Nev)
January 12, 2018, 4:51pm
15552
Mmmmmmmmmmm cucumber & spam , arrrrrgghhh
DB_Custom
(Dale)
January 12, 2018, 4:57pm
15553
Maybe the cuc makes a handle? Get lost when your cells die you have snack food?
A snack handle - this is a great idea. Would lumintop be open to developing this? If anyone has a vegetable cnc machine we can develop a prototype on…
Gj1
(Gj)
January 12, 2018, 5:08pm
15555
Don’t quote the link for him!
I know I know, I shouldn’t have done that. But have you seen the benefits of cucumber in a flashlight
I always wonder about the shapes some plastic things have.
Why the shape of a cucumber?
Where they left with some free plastic molds that they used and turned into a flashlight?
Or did someone seriously say “Yes thats it we’ll put a flashlight into the shape of a cucumber”
“you know what throw on a life hammer”
“Roight jobs done well done lads”
edit: looks like a handcrank vibrator
peabody
(peabody)
January 12, 2018, 5:30pm
15558
hmm cucumber light. First active cooling flashlight?
Pssymon
(Pssymon)
January 12, 2018, 5:38pm
15559
JasonWW:
In case anyone missed it, I’ll probably repost this every now and then.
I have some news on emitter swaps.
I talked to Richard at Mountain Electronics (RMM on these forums and a sponsor here) and told him there might be more than a few guys with GT’S interested in swapping to a cooler tint. He says that if you send in your stock mcpcb to him and buy one of his new XHP35-HI emitters, he will reflow it for free! He has 2 choices right now, 5,000k and 5700k tint. They are both the same D4 brightness bin as the stock GT 4000k emitter.
The cost of both are under $8, plus the shipping cost there and back. I’m in Texas and shipping a small package from him is usually $2 to $3. So I would estimate the entire cost at under $15.
From his store:
BLF GT LED SWAP
Don’t like the tint of your BLF GT XHP35 HI? Send us your MCPCB and we’ll swap it for this one.
Please ship your BLF GT MCPCB to us and we will swap it, test it, clean it, and send it back to you.
Your entire order will not ship until we receive the LED and get it ready to ship.
Ship to:
Mountain Electronics LLC
8076 S. Box Canyon Rd.
West Jordan, UT 84081
Here is the link to the 5000k.
Here is the link to the 5700k.
If your outside of the USA, then I’m not sure what shipping would be or if he even does international shipping. You’d have to contact him for details.
I posted a link to this in the comments under the BLF GT unboxing video by VOB as well.
Buttkicker
(Buttkicker)
January 12, 2018, 5:46pm
15560
JasonWW:
In case anyone missed it, I’ll probably repost this every now and then.
I have some news on emitter swaps.
I talked to Richard at Mountain Electronics (RMM on these forums and a sponsor here) and told him there might be more than a few guys with GT’S interested in swapping to a cooler tint. He says that if you send in your stock mcpcb to him and buy one of his new XHP35-HI emitters, he will reflow it for free! He has 2 choices right now, 5,000k and 5700k tint. They are both the same D4 brightness bin as the stock GT 4000k emitter.
The cost of both are under $8, plus the shipping cost there and back. I’m in Texas and shipping a small package from him is usually $2 to $3. So I would estimate the entire cost at under $15.
From his store:
BLF GT LED SWAP
Don’t like the tint of your BLF GT XHP35 HI? Send us your MCPCB and we’ll swap it for this one.
Please ship your BLF GT MCPCB to us and we will swap it, test it, clean it, and send it back to you.
Your entire order will not ship until we receive the LED and get it ready to ship.
Ship to:
Mountain Electronics LLC
8076 S. Box Canyon Rd.
West Jordan, UT 84081
Here is the link to the 5000k.
Here is the link to the 5700k.
If your outside of the USA, then I’m not sure what shipping would be or if he even does international shipping. You’d have to contact him for details.
does any one in the UK know any modders dealers that could do the same job of altering the coolness… dont yet have the GT but I much prefer a bluer look
You could try James from 3tronics.co.uk
Buttkicker
(Buttkicker)
January 12, 2018, 6:10pm
15562
[/quote]
You could try James from 3tronics.co.uk
[/quote]
Looks like he has shut down
Theodore41
(Theodore41)
January 12, 2018, 6:19pm
15563
If that is indeed so, the 3.9 times heavier, then the 305 gram aluminum reflector would turn into an 1186 gram silver reflector. Unless I missed something, that would mean an Silver reflector equipped GT would weigh approximately 6.9 pounds instead of 5 pounds, if a grown person could not lift 6.9 pounds I would have to wonder who carries their newborn babies for them?
You forgot the silver cost.
Mr.Scott
(Mr.Scott)
January 12, 2018, 6:47pm
15564
What tint light would best highlight my cucumber and spam sandwiches? 4000k, 5000k or 5700k?
thijsco19
(thijsco19)
January 12, 2018, 6:48pm
15565
Pretty sure it needs the be a rosy tint.