Anyone with pc can tell where I am on list. Having trouble searching on my phone.
Thanks
#496
—
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
Can’t find my name on the list ,add me for 1 please.
It’s right above.
.#877.
—
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
FWIW, I upgraded the thermal regulation behavior. I still need to do some extensive testing on it, but hopefully it will behave. Specifically, it adjusts the output in about 640 very small steps until it thinks it is no longer too hot or too cold… and the adjustment speed now changes depending on how far it needs to go. Additionally, the adjustments are based on the projected future temperature, which works like a car trying to “steer into” the curves.
Hopefully this will allow it to react quickly but also avoid oscillations after it has reached a maintainable level. I won’t know for sure until I test it though, and that takes a while.
This is why we CAN have nice things. You rock. Really though, I wouldn’t even know where to start with this stuff. This is awesome.
Sure wouldn’t want to overload our resident Genius but how neat would it be if this light used 3 carefully selected tints to emit a near perfect output? With the proper optic to blend them, of course… is this doable with the XPL HI emitter? (optic is, of course, meant the mixing of tints for a high CRI 5000K output)
Sure wouldn’t want to overload our resident Genius but how neat would it be if this light used 3 carefully selected tints to emit a near perfect output? With the proper optic to blend them, of course… is this doable with the XPL HI emitter? (optic is, of course, meant the mixing of tints for a high CRI 5000K output)
Please put me down for two. Thanks.
Please count me in for 2 more for a total of 3, if that is allowed.
In for 3
Don't give up on your dreams,
Keep dreaming.
uncle_muscle98, Please,Clarify doubt:One or two units?Sorry for my bad English
(google translator)
I want three units total, I posted again several posts later to ask for a third unit. This was a mistake posting the same reply twice.
Second unity?Please: Joey Adams, One or two flashlights?O.K. Total 2 units
Sorry for my bad English
(google translator)
Anyone with pc can tell where I am on list. Having trouble searching on my phone.
Thanks
O.K.
uncle_muscle98 three units total
Sorry for my bad English
(google translator)
#496
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66
Texas_Ace BLF Calibrated Lumen tube
Maukka Calibration Lights for DIY Lumen Measuring Devices
Review Jaxmnve M1 Stainless 10180 Keychain light
Can’t find my name on the list ,add me for 1 please.edit
It’s right above.
.#877.
My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6!
9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66
Texas_Ace BLF Calibrated Lumen tube
Maukka Calibration Lights for DIY Lumen Measuring Devices
Review Jaxmnve M1 Stainless 10180 Keychain light
If still available, I would be in for 2 pieces please.
I got my nuuumber, I got my nuuumber….845!
Doug S.
Thanks JasonWW .
Please darrylo, … Total 4 units?
Sorry for my bad English
(google translator)
Yes, I wish to have 2 of these flashlights
One for me please, add me to the list.
I now require 2 please.
Updated list : … Post moved to Page 130 , http://budgetlightforum.com/comment/1337438#comment-1337438
Short list, Last requests .
.
.
.
Sorry for my bad English
(google translator)
This is why we CAN have nice things. You rock. Really though, I wouldn’t even know where to start with this stuff. This is awesome.
Slow is smooth, smooth is fast.
I would like to be added to the list one more time. Total of 2 please. Thank you.
Slow is smooth, smooth is fast.
Total 3 units?
Sorry for my bad English
(google translator)
Ok, I have finally decided: Please put me down for one!
Thanks!
EDIT: It’d be cool if there was an option to pay a bit more to select Nichias? I’d pay another $10 for that
Please add me to the list for one.
Cheers
In for two
Now your talking. I would gladly pay an extra $10 for the nichia. If this ends up with a green tint mine is just going to be a paperweight.
Sure wouldn’t want to overload our resident Genius but how neat would it be if this light used 3 carefully selected tints to emit a near perfect output? With the proper optic to blend them, of course… is this doable with the XPL HI emitter? (optic is, of course, meant the mixing of tints for a high CRI 5000K output)
Dale
Hello everyone, IF the list is still open, i’m in for one. Thanks
Interested too !
- George
My Reviews : KDlight C8 / ThruNite Archer 1A V3 / Thorfire C8s / ThruNite TN12 (2016) / Utorch UT01 / Utorch UT02 / Jetbeam WL-S2 (xp-l) / ThruNite TC12 V2 / Massdrop Brass AAA / Manker LAD / Lumintop SD26 / ThruNite Mini TN30 (3x xm-l2) / Qualilite D81 / Nitecore MH20GT / Odepro TM30 / Klarus XT30R / Nitecore NU20 CRI / Ultrafire XM-L2 / Foursevens Mini MK II / Manker E02 / Manker E14 II / Teekland Flashlights / Lumintop Elfin / Thorfire S70S / ThruNite Neutron 2C / Jaxman M8 / KDLITKER C8.2 / Zanflare F1 / Nitecore Concept 1 / Emisar D4 / Astrolux MF-01 / ThruNite TC10 V3 / Amutorch JM70 (xpl hi)
Please add me to the list.
Pages