fritz15
(fritz15)
January 17, 2018, 6:35pm
2188
We also posted our impressions here but if you’re not following every post you don’t really have any chance of finding it since the topic here receives so many more replies. And unfortunately, it’s not possible to update the original post by the miller.
Anyway, this week or next week we’ll send our feedback to Lt and then we wait until the next prototype is ready.
Zulumoose
(Zulumoose)
January 17, 2018, 6:42pm
2189
Great to get some reassurance things are moving, seems every time I check out the thread it is so full of new subscribers it seems there is little else going on. Thanx guys.
Firelight2
(Firelight2)
January 17, 2018, 6:45pm
2190
ToyKeeper:
Not without some big changes to the hardware and firmware. It’d need a new driver, a new MCPCB, and a bunch of new code. It’d either sacrifice low-mode efficiency (and moon) by being a triple-FET design, or would sacrifice the high modes by being a 3x2x7135 design, or would need a bigger MCU and probably bigger driver to handle 6 channels instead of 3.
…. but I’m sure you could do it! Having a variable brightness AND variable tint light would be a lot of fun. :+1:
Maybe make this a more expensive option, or have a separate driver and star for modders.
Jiffy
(Jiffy)
January 17, 2018, 6:50pm
2191
fritz15:
We also posted our impressions here but if you’re not following every post you don’t really have any chance of finding it since the topic here receives so many more replies. And unfortunately, it’s not possible to update the original post by the miller.
Anyway, this week or next week we’ll send our feedback to Lt and then we wait until the next prototype is ready.
Thanks fritz15! Yes, I actually find the German thread easier to follow due to less posts even though I have to get it translated. :partying_face:
Kalihi
(Kalihi)
January 17, 2018, 7:48pm
2192
Please put me down for one.
Thanks!
pepinfaxera
(pepinfaxera)
January 18, 2018, 11:16pm
2193
It is at No. 289 and 578 of The Miller: Interest list
Do you want two more units? …… Total 4 units?
.
And you are listed as #289 and #578 and 945 and 946
AlexGT
(AlexGT)
January 18, 2018, 4:10am
2194
After following the GT thread until I got mine, I totally forgot about this light, please sign me up for one if there are still spots available…
Thanks!
dyang
(dyang)
January 18, 2018, 4:44am
2195
I still don’t see my username on the interested party list… Am I supposed to do something different than simply stating I’m interested?
SpAwN
(SpAwN)
January 18, 2018, 4:53am
2196
@dyang , the first post can’t be edited because The Miller is not here. See my post above.
pepinfaxera is listing it kindly in this post here:
And you are listed as #890 and #891
dyang
(dyang)
January 18, 2018, 5:04am
2197
Thanks for the info! I was hard to navigate/locate post that had the update.
Wyre
(Wyre)
January 19, 2018, 4:38am
2198
When The Miller gets back, could I have a second unit added? I believe I am number 58 on the list.
Thank you
pepinfaxera
(pepinfaxera)
January 22, 2018, 2:24am
2199
You are in the interest list nº # 969
Help list for whoever takes over the OP, “The Miller” or “The Team”
fritz15
(fritz15)
January 19, 2018, 9:17am
2200
Thanks for keeping the list up to date!
pepinfaxera
(pepinfaxera)
January 19, 2018, 10:30pm
2201
Thanks to you
Thank you for this magnificent lantern design that you have given us
.
.
Sorry for my bad English
Google translator
StevenK
(StevenK)
January 20, 2018, 1:26am
2202
Please add my name to the list for one!
Recently brought the Q8 BLF, what a flashlight!
Persechini
(Persechini)
January 20, 2018, 2:18am
2203
Which one is currently the working design?
Trick question. The answer is: D) None of the above.
It’s being revised.
Persechini
(Persechini)
January 20, 2018, 4:17am
2205
I’ve been thinking about this light, but design plays a big part in my purchase decisions, guess I’ll wait until it’s more definite
Pulsar
(Pulsar)
January 20, 2018, 4:29am
2206
Same, the bottom shiny milled version looks absolutely top notch to me.
I do not think I would have marked myself interested if it looked different from that version, which was the initial one.
I’m still going to follow here of course as anything could arise.
Same, but still watching in case they go back to a more appealing design.
Jiffy
(Jiffy)
January 20, 2018, 8:50pm
2207
If I remember right, the prototype was the wrong anodising and the plan is to have clear anodising so it will be shiny like the bottom pic.