Ok someone bought all of the W2-2B
and this just minutes before I checked out and got an message they are gone
so whoever has those 66 W2s give me an option to get a few for my own lights
Ok someone bought all of the W2-2B
and this just minutes before I checked out and got an message they are gone
so whoever has those 66 W2s give me an option to get a few for my own lights
LOL! Hopefully there will be more shortly
I am interested!
They also offer some very high-tech TIR lenses (although not in stock) - the large silicone Gaggione models (LLC56N7, LLC66N7). These produce a round spot without any spill! Moreso than normal TIR lenses.
Nice initiative!
” XHP70.2 K4-3A 5000K CRI96 ”
I would be very interested in more than 1 of this led, but looking at the Cutter page, are you sure it is a XHP70.2 and not XHP70 ?
the part number XHP70-20
and picture shows 70.2
as well they were recently added
I can ask them if its really a 70.2
No need to ask them, I just had difficulty reading the page. It is confusing that they have a dedicated XHP50.2 category, but the XHP70.2’s are listed under the XHP70 category , moreover the data sheet pdf that goes with the page is the XHP70 one.
Hi, I’m interested in this
XHP35 HI E4-3C 5000K
https://www.cutter.com.au/proddetail.php?prod=cut3023
but shipping cost to Spain is $60!
am I doing something wrong? is this collective order still running?
The highest bin for XHP35 HI is E2-3C
I got some of those
6.5€ per piece 1€ shipping
The highest bin for XHP35 HI is E2-3C
I got some of those
6.5€ per piece 1€ shipping
Interested, you’ve got a PM
E4 is still available on PCB:
http://www.cutter.com.au/proddetail.php?prod=cut3022
I had a guy from forum that lives a few km from cutter there like 70% of what is listed in the onlineshop is not in stock
the only 2 bins above D were
HD E4-1C
HI E2-3C
So this guy says that Cutter makes up their listings? That’s a strong accusation.
Agro:E4 is still available on PCB:
http://www.cutter.com.au/proddetail.php?prod=cut3022I had a guy from forum that lives a few km from cutter there like 70% of what is listed in the onlineshop is not in stock
the only 2 bins above D were
HD E4-1C
HI E2-3C
I can believe it, I have dealt with Cutter more than a few times! :person_facepalming:
I’m done with them, dealing with Cutter, well it’s like a box of chocolates, you just never know what your going to get!
OK, Cutter has shown a fresh label of XHP35 HI E2.
If someone is willing to organise the collective order, I’m in for a couple.
I am in too… shipping to USA cost $32.
“XHP35 E4-3C 5000K” http://www.cutter.com.au/proddetail.php?prod=cut3023
What size is the star ? No information on the description.
edit : OK it is 20 mm.
There are no E4-3C
I am trying to get those 30 LEDs and shipping them for 1.2$ to members
I’m interested in two of those E2 xhp35’s
Personally I’m not in for that at the moment, but wouldn’t it be good to buy some XHP50.2 K2 while doing a shipment?