Your first 3 links resulted in “page not found” but the Dragon Slayer link worked, thanks for sharing that one, I really like the milled G10 scales on it.
Does somebody have this FURA model? Seems really good with titanium and d2.
If got another fura and i can say they use some serieus good steel on their knives.
Looks nice, steel is nice, but very very thick blade - not very good slicer it seems, with such thickness behind the edge it is almost like an axe profile. All Fura I have seen were too thick IMHO.
Any recommendations on a good torx bit set. I have several and I don’t know if they are cheap or if the Chinese use metric or what but I can not seem to get the pocket clip off a Ganzo knife. Any help is appreciated.
I love my 7010-LUC knife, fun to flick open. I wouldnt mind a just a tad smaller knife (or same size) with assisted openers. Anyone have ideas? Budget please.
I have this one, Made in USA, highly recommended. I bought this set specifically for my folding knives but use that brand for work as well.
There was discussion on it in this thread back in 2015. I haven’t had good luck with any torx or hex wrenches made in China.
The smallest one in the set (T6) fits the clip screws on my Ganzo G719 and G727M, seems to fit a bit tighter on the G719.
I have already sold HX Outdoors ZD004 and one Enlan EM01, besides this ones.
I am still waiting for this one to arrive
Sanrenmu 7010 LUI 6USD
Enlan EL01 - 13USD
Ruike P135-SF - 50 USD Europe supplier
Well the Ruike knives are superior in QC quality and sharpness out of the box and overall quality of the knife and steel.
The Harnd 9CR18Mov, for 20€ is probably the best beefy folding knife in the world? The ganzo 7611 for 13€ and Land 6103 for 13€ too, such great knives.
I just got this Chinese Vegetable Clever a couple days ago. This one is more expensive at $27. It's carbon steel. So it's strong enough to be half as thick (2mm) and take a razor edge. It's on the rustic side (even has some surface rust in the black area. Mine needed to be sharpened just a tad and had some burs that needed to be removed from one of the sides. Don't know how well it will hold its fine edge yet, but it appears to be a winner of a budget vegetable slicer.
Yeah 4mm is crazy and the weight is a little high too for my taste.
But still it seems solid and 29 dollar is just crazy for a titanium framelock with ball bearigs and flipper and steel insert/overtravel stop.