Lexel
(Lexel)
February 13, 2018, 2:22am
10
The Buck driver would support XHP35s, but also the tail board has to be modded to a fixed position as well the tube secured on the head
The Q8 driver is good, it is still possible to get the one with 16AMCs for regulated output up to 5.6A, the MOSFET I use is a bit better than the original, but mst gain comes from taul spring bypass
Newlumen
(Newlumen)
February 13, 2018, 3:02am
11
Nice lexel… you are adding more new driver…
Newlumen
(Newlumen)
February 13, 2018, 3:06am
12
Can you guys tell me estimate lumen and lux for thr blf gt? Xhp70.2 and oslon black … jason, we need you!
MRsDNF
(MRsDNF)
February 13, 2018, 9:03am
13
Excellent work Lexel. :+1:
PH_Oton
(PH_Oton)
February 13, 2018, 12:07pm
15
Amazing amount of effort and contribution for BLF! :+1:
Pöbel
(Pöbel)
February 16, 2018, 4:02pm
17
Hi Lexel, do you have any Eta on the 22mm buck driver?
Lexel
(Lexel)
February 16, 2018, 11:48pm
18
I will order first prototype boards this weekend
I make them 4 layer for better heat dissipation, but this also makes the order in china expensive and I just odered a bunch of 4 layer 2 weeks ago, so I need to fill the 10x10cm with more boards before i do a new order
Satan
(Satan@103TFS)
February 21, 2018, 7:37am
20
Lexel:
20mm Buck driver added
for Convoy L2
How many Lumen/Kcd can we expect for L2 with XPL hi with 1/2 LK50 ?
Lexel
(Lexel)
February 21, 2018, 7:41am
21
That Buck driver is targeted to drive XHP50.2 basically in that light
for throw you will have to wait for the Boost driver for XHP35 at 2-2.5A
this Buck should do fine up to 7A output but is limited to 2S input
DoNkEyConN
(DoNkEyConN)
February 21, 2018, 8:59am
22
Nice one Lexel,
how much are the buck drivers for the L2 / Xhp50.2 ??
WTF
(WTF)
February 21, 2018, 1:25pm
23
Can Bistro be used with these drivers?
Lexel
(Lexel)
February 21, 2018, 1:35pm
24
sure it is designed on Attiny25/85 based footprints
Lexel
(Lexel)
February 21, 2018, 1:36pm
25
first driver that was requested for special 48A Output on good efficiency
vinte77
(vinte77)
February 23, 2018, 4:14pm
26
Looking forward to the 20mm/22mm buck drivers. I got Jaxman Z1 and a Convoy L2 that could use the drivers.
Lexel
(Lexel)
March 12, 2018, 11:12am
27
New Boost drivers:
Order with those boards made today
1S or 2S Input
6V 5-7A or 12V 2.5-3A output
17mm
20-22mm
23mm special for Klarus XT Series
24-30mm
New generation of high current Buck drivers
up to 40A CFT-90 for BLF GT
up to 33A CFT-90 for TN42
up to 25A 6V v1 or 20A 9V v2 MF01/MT03/MT09R
Lexel:
New Boost drivers:
Order with those boards made today
1S or 2S Input
6V 5-7A or 12V 2.5-3A output
17mm
20-22mm
23mm special for Klarus XT Series
24-30mm
New generation of high current Buck drivers
up to 40A CFT-90 for BLF GT
up to 33A CFT-90 for TN42
up to 25A 6V v1 or 20A 9V v2 MF01/MT03/MT09R
Outstanding! Way to GO Lexel!
Agro
(Agro)
March 12, 2018, 3:01pm
29
Supported firmware?
Price?
And where can I buy them?