✌ FREEME - ASTROLUX MF04S (XHP70.2) & MF04 (XHP35 HI) - BRASS@.@

[g_sintornillos]

If it comes with the glued threads I do not want it
My MF01 came with the threads glued
I had to open it with a pair of engine oil filter wrenches and I destroyed the heads of the screws that hold the driver
I will not buy another Astrolux with glued threads
I did not buy the MF02 because the one that received Lexel had the threads glued

[Review] Astrolux MF02 XHP35 HI 2x/4x18650 flashlight supplied by Banggood

The light was supplied by Banggood, no compensation other than the light itself was received for this review [image] The light will be also soon availiable in NW The light was supplied by Banggood for a review, I am honest and will judge the light as it is with its pros and cons . Other reviews Maukka fantastic review with a lot measurements Astrolux MF02 CW review w/ measurements (XHP35 HI, 4x18650) . Manufactory specification: Product name: Astrolux MF02 XHP35 HI 3000Lumens Long Ran…

Sorry

[freeme (youtube.com/@1thedeals)]

I can request for unsealed version for initial batch like MF01.

@Lexel

I hope Astrolux does not start on all lights to work with red locktite if so this is a killer criterium to buy new ones, that huge bezel is almost impossible to get open with red locktite on it without heating the whole head to over 200°C I got here some MF01 already modded for other people !{width:70%}http://www.metronixlaser.de/bilder/flashlight/IMG_0486.jpg! The last 3 lights I got are secured with red locktite on Bezel and one driver screw they even took a longer screw than the other 2 to make it almost impossible to get it out if not using my autogen gas welder to heat the screw up locally and have the whole head 120°C heated up with a larger flame

[td1042k]

Seems like in general no one wants a light that is sealed with glue or threadlock. Can we get the MF04 to be built completely without glue or threadlock? Maybe pass along a message to the manufacturer stating so?

[turkey]

I’m interested! :laughing:

[octav]

Interested, thanks.

[ErrolRS]

Interested

[freeme (youtube.com/@1thedeals)]

Yes, it can be done.

@td1042k

Seems like in general no one wants a light that is sealed with glue or threadlock. Can we get the MF04 to be built completely without glue or threadlock? Maybe pass along a message to the manufacturer stating so?

[freeme (youtube.com/@1thedeals)]

List updated!

[blueb8llz]

Interested

[panagis]

Interesting for an unglued light…

[Hollywood]

I’m interested

[SKV89]

@freeme

I can request for unsealed version for initial batch like MF01.

@Lexel

I hope Astrolux does not start on all lights to work with red locktite if so this is a killer criterium to buy new ones, that huge bezel is almost impossible to get open with red locktite on it without heating the whole head to over 200°C I got here some MF01 already modded for other people The last 3 lights I got are secured with red locktite on Bezel and one driver screw they even took a longer screw than the other 2 to make it almost impossible to get it out if not using my autogen gas welder to heat the screw up locally and have the whole head 120°C heated up with a larger flame

Why just first batch? Please request for Banggood/Astrolux to stop using glue on all of their flashlights. The majority of their customers are flashlight hobbyists and many would like to be able to mod their flashlights.

Please put me down on the interest list.

[chakrawal]

Interested.

[Grigs68]

Interested.

[Jiffy]

Interested.

[ryanferg]

Interested

[Gj1 (Gj)]

@SKV89

@freeme

I can request for unsealed version for initial batch like MF01.

@Lexel

I hope Astrolux does not start on all lights to work with red locktite if so this is a killer criterium to buy new ones, that huge bezel is almost impossible to get open with red locktite on it without heating the whole head to over 200°C I got here some MF01 already modded for other people The last 3 lights I got are secured with red locktite on Bezel and one driver screw they even took a longer screw than the other 2 to make it almost impossible to get it out if not using my autogen gas welder to heat the screw up locally and have the whole head 120°C heated up with a larger flame

Why just first batch? Please request for Banggood/Astrolux to stop using glue on all of their flashlights. The majority of their customers are flashlight hobbyists and many would like to be able to mod their flashlights.

Please put me down on the interest list.

Aside from modding, if the manufacturer wants to glue the light shut they should assume all servicing at their expense, centering led’s, removing dust from reflectors, cleaning fingerprints inside the lens, etc.

[freeme (youtube.com/@1thedeals)]

List updated!

[Natopsi]

Interested

[TerryK]

In pending price and spec!