I haven’t looked at this thread in some time. Nice to see this project coming along. I actually feel the new design is preferable. I understand the minimalist style and appreciation of the original and like it too but these pics above seem more appealing to me. I like the clip too. The clip on my Manker E14 makes me worry because it “clips” onto the light as well (I just feel like it could accidentally push out/unclip when hanging on my waist). This FW3A looks like a good EDC or ‘go to’ light for me.
Thanks to the members picking up the slack from Miller’s absence
Question for those that use a pocket clip… do you put the light inside your pocket with only the clip showing outside or the opposite of that? To me it makes no sense to have the flashlight outside the pocket where it could get snagged and ripped off the clip, lost or broken. My son-in-law carries his X6 with the light outside, or used to, back when he used it frequently during his night shift.
In the same sense that a folding pocket knife with a clip goes inside the pocket, displaying only the clip, I carry a small flashlight clip out, light protected inside the pocket.
Question for those that use a pocket clip… do you put the light inside your pocket with only the clip showing outside or the opposite of that? To me it makes no sense to have the flashlight outside the pocket where it could get snagged and ripped off the clip, lost or broken. My son-in-law carries his X6 with the light outside, or used to, back when he used it frequently during his night shift.
In the same sense that a folding pocket knife with a clip goes inside the pocket, displaying only the clip, I carry a small flashlight clip out, light protected inside the pocket.
Lights and knives, I use them inside the pocket and pocket clip on the outside, either on the jeans or the jacket
I used to like clips until I realized carrying the light inside the pocket defeats the purpose of a clip. Maybe they should be called belt clips? Today I find a clip useful in a flashlight if it’s reversible so I can use it as a headlamp on a cap brim
To my way of thinking, the clip keeps the light up at the edge of the pocket ready for a quick grab and also away from loose change and keys and such. If the clip were to get hung up and ripped off the light, the light would merely fall into the pocket. So the clip is just a way to keep the light close to hand, ready to grab if and when needed.
do you put the light inside your pocket with only the clip showing outside or the opposite of that?
I carry lights inside my pocket with the clips showing outside.
I can comfortably pocket carry lights up to the size of an X6 in most of my pants and shorts.
While hiking, I wear a floody headlamp and use a thrower when looking for a landmark or trail.
I frequently clip an X6 to my backpack’s shoulder strap or outside the breast pocket of my shirt or vest, but very rarely outside my pants pocket. Seems risky.
This light will be small enough to clip into a chest pocket of a light jacket, making it readily available and safer from damage, yet still a true powerhouse of surprising proportion! As for me, I’m ready for this to go ahead and get here… getting antsy enough for it am thinking about making my own. lol (wouldn’t be as refined of course, but it’d keep me busy til this arrived. )
So the clip is just a way to keep the light close to hand, ready to grab if and when needed.
Exactly! The clip keeps the light vertical and easy to retrieve from a pocket.
The only time this has failed me is while exiting a vehicle. On two occasions, the seatbelt snagged my EDC’s clip and pulled the light out of my pocket. Luckily I noticed right away.
I keep hearing about The Miller’s ‘absence’… Where did he go??
The Miller runs a bed and breakfast in France and had a lot of repairs and work to do on his property as winter approached which took a lot of this time. Then he took ill for a couple of weeks and got behind on the three group buys that he was running simultaneously. On the GT thread alone there were 1800 new posts in 3 weeks. I personally think that he got a taste of what it’s like to not be weighed down by all the stuff on blf. It’s refreshing. Lol
Around Christmas time he posted back that he was feeling better and was going to try and catch up on all the threads, but he never did. We told him not to try that as it’s too much work and we would give him notes of the important stuff. That way he could just join back in. Then he dissappeared again. He seems to be just living life with his wife and son. I can’t blame him for that.
He’s not on social media, but his wife is, and everything seems to be okay with him.
—
Texas Ace Lumen Tube calibrated with Maukka lights
Dale sent me one made by ZozzV6. I don’t really know the details, but Zozz would. It’s a very tight fit; I actually had to sand it town a little to make it easier to put on.
You can find every flashlight related 3D printed stuff in my sign. You can download and print them. Most of them are not will be perfect fit at first time because every printer has different accuracy especially the cheap ones so maybe you need to print some and adjust scale for perfect fit.
I keep hearing about The Miller’s ‘absence’… Where did he go??
The Miller runs a bed and breakfast in France and had a lot of repairs and work to do on his property as winter approached which took a lot of this time. Then he took ill for a couple of weeks and got behind on the three group buys that he was running simultaneously. On the GT thread alone there were 1800 new posts in 3 weeks. I personally think that he got a taste of what it’s like to not be weighed down by all the stuff on blf. It’s refreshing. Lol
Around Christmas time he posted back that he was feeling better and was going to try and catch up on all the threads, but he never did. We told him not to try that as it’s too much work and we would give him notes of the important stuff. That way he could just join back in. Then he dissappeared again. He seems to be just living life with his wife and son. I can’t blame him for that.
He’s not on social media, but his wife is, and everything seems to be okay with him.
Thanks for responding. It’s good to know and I didn’t want to come across nosy. He’s just a big part of the forum and it’s good to know he’s ok. Glad he’s taking time with his family. He’s been so freakin’ busy with some HUGE group buys lately; sounds like a healthy choice.
He has done A LOT. I wish him the best, and hope he returns in whatever capacity, whenever he is ready. How would would keep up with his wife on social media, if it is okay to ask?
TK, the FW3A can be done that way relatively safely as the clip is clamped on by the tail cap, but one of the snap on style clips would be much more prone to lose the light in that carry style. (Goddesses have better fortune than some of us mere mortals so you probably wouldn’t have to worry about it either way)
Been out of the forum a lot myself recently, coming back in and seeing the sleeker design cues it looks pretty good. Not sure why I took the stance I took earlier, grouchy in my old age I guess… my apologies to all concerned.
TK, the FW3A can be done that way relatively safely as the clip is clamped on by the tail cap, but one of the snap on style clips would be much more prone to lose the light in that carry style. (Goddesses have better fortune than some of us mere mortals so you probably wouldn’t have to worry about it either way)
Been out of the forum a lot myself recently, coming back in and seeing the sleeker design cues it looks pretty good. Not sure why I took the stance I took earlier, grouchy in my old age I guess… my apologies to all concerned.
Question for those that use a pocket clip… do you put the light inside your pocket with only the clip showing outside or the opposite of that? To me it makes no sense to have the flashlight outside the pocket where it could get snagged and ripped off the clip, lost or broken. My son-in-law carries his X6 with the light outside, or used to, back when he used it frequently during his night shift.
In the same sense that a folding pocket knife with a clip goes inside the pocket, displaying only the clip, I carry a small flashlight clip out, light protected inside the pocket.
If I’m wearing pants with a pocket down the side of the leg I’ll have the light in / pocket clip out. Otherwise hip pockets are uncomfortable for any sort of bending, squatting, sitting (car included). I don’t wear jackets much but don’t use the clip on the rare occasion I have a light in a jacket. So I usually hang the light outside the pocket or on the belt.
Has been a while. So far it looks like BCD or just C, depending on where the threshold is placed. The current firmware implements BCD, so it looks like probably no change.
Blink option running vote tally…
As a reminder, the options are: (where in the ramp to blink)
A. Floor
B. ~150 lm, level 65/150
C. ~1000 lm, level 130/150 (highest regulated level)
I haven’t looked at this thread in some time. Nice to see this project coming along. I actually feel the new design is preferable. I understand the minimalist style and appreciation of the original and like it too but these pics above seem more appealing to me. I like the clip too. The clip on my Manker E14 makes me worry because it “clips” onto the light as well (I just feel like it could accidentally push out/unclip when hanging on my waist). This FW3A looks like a good EDC or ‘go to’ light for me.
Thanks to the members picking up the slack from Miller’s absence
Big PITA build -- Head only build --Vape conversion #4 -- UF2100 Makeover -- Ti-mo -- 6th O-L comp entry -- Titanium Build -- Hunting Light -- 21700 Tube Light -- Stripey mtg2 Light -- UV Light -- Colour V4A Light -- Copper 26650 Light -- Quad xhp35 Light -- Finger Sizzler -- Mechanical Mod Light
Please add me to the list for two (2)
Paul-
I keep hearing about The Miller’s ‘absence’… Where did he go??
Interested in one please
Question for those that use a pocket clip… do you put the light inside your pocket with only the clip showing outside or the opposite of that? To me it makes no sense to have the flashlight outside the pocket where it could get snagged and ripped off the clip, lost or broken. My son-in-law carries his X6 with the light outside, or used to, back when he used it frequently during his night shift.
In the same sense that a folding pocket knife with a clip goes inside the pocket, displaying only the clip, I carry a small flashlight clip out, light protected inside the pocket.
Lights and knives, I use them inside the pocket and pocket clip on the outside, either on the jeans or the jacket
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
I used to like clips until I realized carrying the light inside the pocket defeats the purpose of a clip. Maybe they should be called belt clips? Today I find a clip useful in a flashlight if it’s reversible so I can use it as a headlamp on a cap brim
In my Tree
My collection: Emisar: D4 / D1 / D4 (broken) ― Convoy: C8 Clear / S2+ Clear / S2+ / S2+ UV / S6 ― Nitecore: Tube / Thumb / Concept 1 / HC30 / HC33 / TIP / TIP CRI / TINI ― Lumintop: Tool AAA / Tool AA / HLAAA / EDC05 ― Sofirn: SF10 / SF12 / SF12 / SF14 / SF14 / SF14 / SP10A / SP10A (gifted) ― Jaxman: E3 ― UTorch: UT01 ― Trustfire: Z2 ― Skyfire: SF-065 (trashed)
To my way of thinking, the clip keeps the light up at the edge of the pocket ready for a quick grab and also away from loose change and keys and such. If the clip were to get hung up and ripped off the light, the light would merely fall into the pocket. So the clip is just a way to keep the light close to hand, ready to grab if and when needed.
I can comfortably pocket carry lights up to the size of an X6 in most of my pants and shorts.
While hiking, I wear a floody headlamp and use a thrower when looking for a landmark or trail.
I frequently clip an X6 to my backpack’s shoulder strap or outside the breast pocket of my shirt or vest, but very rarely outside my pants pocket. Seems risky.
This light will be small enough to clip into a chest pocket of a light jacket, making it readily available and safer from damage, yet still a true powerhouse of surprising proportion!
As for me, I’m ready for this to go ahead and get here… getting antsy enough for it am thinking about making my own. lol (wouldn’t be as refined of course, but it’d keep me busy til this arrived. 
)
The only time this has failed me is while exiting a vehicle. On two occasions, the seatbelt snagged my EDC’s clip and pulled the light out of my pocket. Luckily I noticed right away.
Not sure i got added to the list, could you put me down for 2 please?
The Miller runs a bed and breakfast in France and had a lot of repairs and work to do on his property as winter approached which took a lot of this time. Then he took ill for a couple of weeks and got behind on the three group buys that he was running simultaneously. On the GT thread alone there were 1800 new posts in 3 weeks. I personally think that he got a taste of what it’s like to not be weighed down by all the stuff on blf. It’s refreshing. Lol
Around Christmas time he posted back that he was feeling better and was going to try and catch up on all the threads, but he never did. We told him not to try that as it’s too much work and we would give him notes of the important stuff. That way he could just join back in. Then he dissappeared again. He seems to be just living life with his wife and son. I can’t blame him for that.
He’s not on social media, but his wife is, and everything seems to be okay with him.
Texas Ace Lumen Tube calibrated with Maukka lights
Click this to go to signature links.
You can find every flashlight related 3D printed stuff in my sign. You can download and print them. Most of them are not will be perfect fit at first time because every printer has different accuracy especially the cheap ones so maybe you need to print some and adjust scale for perfect fit.
Reviews: YLP Panda 3R and Unicorn, Armytek Prime C1 Pro, Acebeam M50, Imalent MS18, Convoy M3, Nitecore TIP2, Imalent RT70, Wuben T70, Sofirn SP32A, Thorfire VG15S, Thorfire VG10S, Thorfire TG06S
Mods: Astrolux MF01-20K, Small sun T08 MT-G2, Eagle eye X6 triple XPL, Ultrafire F13 MT-G2, Convoy C8 XHP70, Solarstorm T3 triple XP-L HI
Big flashlight measurement and beamshot collection
3D printing stuff for flashlights
My flashlight related Instagram
My Flashlight related Youtube channel called Zozzlights
My Patreon page to support my reviews and mods
I wonder when the FW3A will go on sale. 3 months? 6 months?
Great, thanks a lot!
Max
Thanks for responding. It’s good to know and I didn’t want to come across nosy. He’s just a big part of the forum and it’s good to know he’s ok. Glad he’s taking time with his family. He’s been so freakin’ busy with some HUGE group buys lately; sounds like a healthy choice.
Thanks again for filling me in.
He has done A LOT. I wish him the best, and hope he returns in whatever capacity, whenever he is ready. How would would keep up with his wife on social media, if it is okay to ask?
Usually I have no pockets. However, a light can be clipped to a purse or, when wearing an outfit with more than one piece, at the waist.
For example:
That looks great Toykeeper.
When can I get my FW3A?
TK, the FW3A can be done that way relatively safely as the clip is clamped on by the tail cap, but one of the snap on style clips would be much more prone to lose the light in that carry style. (Goddesses have better fortune than some of us mere mortals so you probably wouldn’t have to worry about it either way)
Been out of the forum a lot myself recently, coming back in and seeing the sleeker design cues it looks pretty good. Not sure why I took the stance I took earlier, grouchy in my old age I guess… my apologies to all concerned.
TK, the FW3A can be done that way relatively safely as the clip is clamped on by the tail cap, but one of the snap on style clips would be much more prone to lose the light in that carry style. (Goddesses have better fortune than some of us mere mortals so you probably wouldn’t have to worry about it either way)
Been out of the forum a lot myself recently, coming back in and seeing the sleeker design cues it looks pretty good. Not sure why I took the stance I took earlier, grouchy in my old age I guess… my apologies to all concerned.
Here: http://budgetlightforum.com/comment/1255477#comment-1255477
-#1001 and #1002
[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150
Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)
GIVEAWAY: 1
If I’m wearing pants with a pocket down the side of the leg I’ll have the light in / pocket clip out. Otherwise hip pockets are uncomfortable for any sort of bending, squatting, sitting (car included). I don’t wear jackets much but don’t use the clip on the rare occasion I have a light in a jacket. So I usually hang the light outside the pocket or on the belt.
Big PITA build -- Head only build --Vape conversion #4 -- UF2100 Makeover -- Ti-mo -- 6th O-L comp entry -- Titanium Build -- Hunting Light -- 21700 Tube Light -- Stripey mtg2 Light -- UV Light -- Colour V4A Light -- Copper 26650 Light -- Quad xhp35 Light -- Finger Sizzler -- Mechanical Mod Light
Hi, thanks for helping put this together. I'd be interested in one please!
www.loneoceans.com/labs/
GXB100 - Single-cell 100W Gallium Nitride FET Constant Current Boost Driver with Fuzzy Logic & Microphone
GXB172 - Single-cell 50W Constant Current Boost Driver 7V @ 6.5A (+ 12V and 9V configs) - Older: GXB17 / GXB20
GFS16 - Integrated 1milliOhm FET Switch System & Improved Tail-light PCBs with Battery Sensing (16-20mm)
GXF22 - Linear Constant Current Driver with ultra-low resistance FET DD for Emisar D4
Has been a while. So far it looks like BCD or just C, depending on where the threshold is placed. The current firmware implements BCD, so it looks like probably no change.
Blink option running vote tally…
As a reminder, the options are: (where in the ramp to blink)
Results: (34 votes)
Votes:
- ABCD Agro
- ABCD CRX
- ABCD DB Custom
- X Eraursls1984
- CD Garth
- AD JasonWW
- AD Lazy-R-us
- ABCD MascaratumB
- BC Meyer
- ACD Minocc
- BC PBWilson
- ABCD Persechini
- AcD Pulsar
- ABD RT—
- C Spiderlight
- X Tender
- AD Tixx
- BC ToyKeeper
- BC Yammie
- C cabfrank
- ABCD electricjelly
- BC gi.lumens
- AbcD gravelmonkey
- ABCD joechina
- BCD keengeorge
- BC mustig
- AD netprince
- C pepinfaxera
- BC richnpc
- BCD sanches
- ABCD shirnask
- CD skinny_tie
- BC steel_1024
- D varbos
Can I be added to list for 3.
Thank you
TK – I’m not sure what the difference (in lumens) is between C and D but one of those would be my preference
Big PITA build -- Head only build --Vape conversion #4 -- UF2100 Makeover -- Ti-mo -- 6th O-L comp entry -- Titanium Build -- Hunting Light -- 21700 Tube Light -- Stripey mtg2 Light -- UV Light -- Colour V4A Light -- Copper 26650 Light -- Quad xhp35 Light -- Finger Sizzler -- Mechanical Mod Light
I can’t find my name on the list today
The floor and ceiling are configurable. By default, C and D are the same… but the user can configure the ceiling to be higher or lower than default.
Similarly, one could also set the floor level A to be above level B… but I doubt anyone would want to.
Pages