CRX Brass Puck

This wee fella is made from an old brass coin trick I've had laying around for years.

It has three 4mm magnets on the bottom, one of which controls a momentary switch to operate the light as can be seen below.

Nichia 219B on 20mm KD DTP MCPCB
20mm x 1.5mm ARC glass
Cyan GITD bezel trim
Soldered brass LED shelf
Micro USB port
TP4056 ME charger board
(Modded to 60mA charge current)
120mAh Lipo cell
Potted internals
Magnetic
Momentary base switch
High - 126lm
Med - 56lm
Low - 10lm
Size - 29mm x 22mm
Weight - 52g

This light uses a SWM C10R driver and 120mAh lipo cell with micro USB charging port.

The light has three modes and can be operated while on a flat surface or by simply pressing the button.
A handy little night light when placed on the fridge or table top etc as it just needs a press on top to operate 8^)
Press & hold while on changes modes. Has mode memory.

.

Not many build pics but some bits n' pieces shown here.

As a steampunk fan, I swear I want to move into the home where CRX lives!

Another great creation!

An enlightened mind is a joy for ever(ybody).

cool!

My mind boggles at your creativity CRX :open_mouth: Another amazing build :beer:

Is there anything that you can’t turn into a flashlight CRX? :smiley:
Superb, again :wink:

The Master of Minuscule strikes again !

Great work as always .
Keep ’em coming .

These little things are sweet!

Nice one, ones more! Very uncommon formfactor :+1:

Super nice awesome build !!

What do you use to pot your internals?

Very nice :beer: ! It would be interested to see build pics and how you manage to stuff all that inside that small body.
Could you post a link of that charger board (TP4056 ME)?
Did you connect the battery output over the TP4056 board?

Awesome……………you rock! :sunglasses:

Awesome job!!!

looks pretty useful too. :sunglasses:

Wow, really. So ingenious, you make stuff that doesn’t even occur to 99% of us and those creations are always awesome!

Nice job! Keep the fun lights coming!

anybody who wouldn’t want one of these?

Thanks for all your comments :beer:

I used UV setting glue for the driver in the top and JB Weld for the stuff in the bottom half.

I wonder myself sometimes :smiley:
vwpieces first introduced the charger boards to me here, his M3 build. £bay link.
Connects like this:

Awesome job CRX, I bet most people can’t even figure out what it is, until you turn it on.
I admire your creativity. :+1:

Dude, you stuff is soooo cool!