Q8, PMS SEND TO THOSE WITH ISSUES BLF soda can light

Thanks fot the O-ring info & link. They have different colors & GID too…… :wink:

@dvzzz……. If you need one right away or do not want to order them, go to an Auto Parts store & find one that fits. They usually have a very good assortment of sizes.

I haven’t had much luck at auto parts stores. My local Ace Hardware Store keeps a lot more o rings on hand. The local places that carry the largest selection of O-rings by far are going to be hydraulic repair shops. If you live in a fairly large city there should be at least one shop that repairs hydraulics. They carry Master kits with every size and shape O ring imaginable.

Small parts can be hard to find. I still haven’t found the M2.5 x 5mm brass screws for the little Q8 mod. Found them on Amazon but I don’t need 50 of them. I’ll keep looking.

Man I have had great luck…… my ‘parts store’ just about has it all.

Of course it is not your basic generic run of the mill, chain parts store either………… :wink: So if someone has only acess to this type ‘parts store’ & not the real deal…… those places Jason mentioned could be a great resource. :wink:

Check some of the Ebay links people gave, they had them in smaller quantities.

I’ll try to hunt up a link or two………

Edit: Here is a link Bushmaster, I got some from this place.

https://m.ebay.com/itm/M2-M2-5-M3-Brass-Phillips-Pan-Round-Head-Cap-Bolts-Screws/232018831618?\_mwBanner=1

From the 5 million page Q8 thread…

https://www.ebay.com/itm/M2-M2-5-M3-Brass-Phillips-Pan-Round-Head-Cap-Bolts-Screws/232018831618?ssPageName=STRK%3AMEBIDX%3AIT&var=531211953181&\_trksid=p2060353.m2749.l2649

Is it possible to order a Q8 MCPCB separately?

Not that I know of. There will be an aftermarket Q8 MCPCB (led4power is working on that, to be available at led4power.com) for 4040 and 5050 leds, but the stock board for 3535 leds is not separately available.

I’m still waiting on CW version. Lol

Hey, if anyone here is interested, Texas_Ace is going to build a limited run of calibrated Lumen Tubes/Spheres (with no math involved!) for those that want to measure their Q8 or any other lights actual output. More details are here.

Just got mine from Amazon .com, it came from Texas USA to London United Kingdom.

I did not want it shipped form anywhere else.4 Days to UK with priority shipping, OK I paid over the odds $117 with taxes and duty.

I have to say I am amazed every time I fire it up. I will be doing a few mods tail spring bypass, double A R Coated lens, brass screws, but to be honest it does not need it.

At times it is too bright. Well done to everyone involved in this project.

Where do we sign up?!

Here you go.
Q8 Dual footprint, quad LED copper DTP LEDboard interest List

My switch won’t turn the light off when I click it. Usually takes one or a few clicks. Can I pay someone to do everything in lazy’s Thread and install new brass screws? I started the list in October after he posted it and I’m just now finished reading it let alone attempting it.

Have you got a link to that thread your talking about??

Post #14159

Thank you…. :+1:

You might give Texas_Ace a PM as he is in the US and might work on it for you.