The max should be around 100-200k (technically it should be around 200k but I have no idea what would happen up there since the highest I have personally tried is 25k)
I will not know for sure on the 4” until I build one but I should be able to calibrate it the same as the 3” version.
Ok, I will be busy most of the day tomorrow so I decided to go ahead and send out the PM’s tonight. Everyone should have them now, if I missed you let me know!
Please be sure to include in the payment notes the information I request, I don’t want to loose the orders and my paypal is a bit crazy right now lol.
Ok, I should have the list updated both with the latest additions and with those that have paid and what size they want. If you see any errors please let me know.
I spent the morning working on this project again. I checked a few places for more diffusing sheet. As I worried I was not able to find more of one of the sheets but did fine a few other types so I got those. My goal is that by mixing and matching the sheets, adjusting the order and the direction they are facing I can get the numbers really close and then fine tune from there.
I also put in the order for the 3D Printed centering rings, it will take over 100 separate batches to make all of them since only 2 or 3 can fit on the machine at a time, so that was not as cheap as I hoped lol.
I have the Meter order almost ready to go, just need to figure out the final quantity. They are in stock and they can have them here in about a week though.
Then just a matter of figuring out exactly what combo of PVC to order. I will need to wait until the majority of the payments are in for that.
If not enough are in by Monday I might place a small order for testing an order the rest once the payments are made.
3.5” for me. I’ll run up to my desktop tonight or first thing in the morning and send your payment. I think it’s been quite a while since I’ve been this excited over a purchase
Ok, the list should be updated the the latest payments.
Please check it over to make sure your payment is showing up. I have had 3 people now that sent the payment but it somehow went to the wrong email address and said it had not been collected yet. They canceled them and resent and it went through the 2nd time. No idea why yet.
At least one of them did it on the phone the first time and it worked fine on the computer later.
Lumen measurement still gonna be 250000 max ?
The max should be around 100-200k (technically it should be around 200k but I have no idea what would happen up there since the highest I have personally tried is 25k)
I will not know for sure on the 4” until I build one but I should be able to calibrate it the same as the 3” version.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Ok, I will be busy most of the day tomorrow so I decided to go ahead and send out the PM’s tonight. Everyone should have them now, if I missed you let me know!
Please be sure to include in the payment notes the information I request, I don’t want to loose the orders and my paypal is a bit crazy right now lol.
Now I am hitting the sack…
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I am ordering the 3.5” sphere
Sending payment now
Payment sent
3.5” sphere
My reviews: , J5 Tactical V1 Pro LINK and Thirteen Optical Sensors LINK and a short review Zebralight SC700d LINK
My Collection (photo) LINK
PPal sent, 3.5” sphere. Thank you for doing this for us.
Has that sphere got BaSO4 coating?
No
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
Mine will be for 4.5”
Sent payment for 1×4.5”
Put me on the list for a 3.5”
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
3 lumen tube, 4.5”. $300 sent 4/19. $180 sent today. Thank you TA…
Ok, I should have the list updated both with the latest additions and with those that have paid and what size they want. If you see any errors please let me know.
I spent the morning working on this project again. I checked a few places for more diffusing sheet. As I worried I was not able to find more of one of the sheets but did fine a few other types so I got those. My goal is that by mixing and matching the sheets, adjusting the order and the direction they are facing I can get the numbers really close and then fine tune from there.
I also put in the order for the 3D Printed centering rings, it will take over 100 separate batches to make all of them since only 2 or 3 can fit on the machine at a time, so that was not as cheap as I hoped lol.
I have the Meter order almost ready to go, just need to figure out the final quantity. They are in stock and they can have them here in about a week though.
Then just a matter of figuring out exactly what combo of PVC to order. I will need to wait until the majority of the payments are in for that.
If not enough are in by Monday I might place a small order for testing an order the rest once the payments are made.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Payment sent for a 3.5” lumen tube. Thanks TA!
If anyone needs a little more time to pay, you can send a deposit now to confirm your interest it will hold your slot.
Send me a PM and we can discuss the details.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Payment sent for lumen tube 3.5”. Thanks!!
Incase you didn’t see it. I paid for the 4.5” already but I sent the payment as friend to save you some paypal fees.
Added to the list
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Yep, got it added as well, just been running around most of the day.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Payment sent for a 3.5inch lumen tube.
Got yours and I should have the lists updated as of now.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Sent $160.00 for a 4.5” T/A Light Sphere
Thanks T/A!KB1428 “Live Life WOT”
Got it and updated the list!
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
3.5” for me. I’ll run up to my desktop tonight or first thing in the morning and send your payment. I think it’s been quite a while since I’ve been this excited over a purchase
TA…. I’ll send payment tomorrow (Sunday)…… I am trying to decide between 3.5 & 4.5.
…. 
Decisions, decisions………
You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant
.................................. "Slow is Smooth, Smooth is Fast" ...................................
Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$
Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart
Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help??? TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal
3.5” for me
"Over 2000000 hours (about 200 years) standby time" (DQG Tiny 4th)
"27,157 results for zoomable flashlight" (ebay)
In for one 3.5”
Payment sent
Payment sent
3.5”
Thank you.
Sorry for my poor english.
Ok, the list should be updated the the latest payments.
Please check it over to make sure your payment is showing up. I have had 3 people now that sent the payment but it somehow went to the wrong email address and said it had not been collected yet. They canceled them and resent and it went through the 2nd time. No idea why yet.
At least one of them did it on the phone the first time and it worked fine on the computer later.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Payment sent.
3.5” version………Which I forgot to add to the payment note.
Realized I forgot that right after I hit send.
Pages