FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

[sleasys14]

put me down for 1 please.

[ToyKeeper]

@joechina

I can be wrong on this, but hasn’t a prototype not a thin oring between the tubes on the head side?

Yes, the tail has an O-ring between the two tubes. Perhaps the front end should too… if there’s a way to actually get a thin enough one in place.

Fritz took his prototype apart. It apparently also works with rubber boots.

I try to check TLF from time to time, but there is usually not much nude gnu news. Instead, I find other funny things to read:

@Google Translate

@Kafuzke

@lichtistdunkel

demo videos to lightning storm and candle flicker mode

@ Cawi Please, please do not do that! I would prefer the identical UI as the Emisar. I am out with such a fair. Toykeeper likes to live out its play instinct in its copy. But nobody needs such a mump.

[StevenK]

Looks Great!

Please update quantity to now be a total of 2 for #965 StevenK (I believe that is the #)

Thanks,
Steven

[DavidEF]

There are o-rings plenty thin enough. And for such a thin o-ring, not much of an indent in the tube should be needed to hold it in place. But, I still think it’s not the best solution. Then again, I’m not an engineer by trade, nor a machinist.

[spaceminions]

No news is bad news, but in this case, I think people dropping off the radar for months is just

old gnus.

[goshdogit]

@Kafuzke (via Google Translate)

But nobody needs such a mump.

I, for one, need such mumps as lightning and candle modes! :partying_face:

[DavidEF]

@goshdogit

@Kafuzke (via Google Translate)

But nobody needs such a mump.

I, for one, need such mumps as lightning and candle modes! :partying_face:

:sunglasses: :+1:

[Geuzzz]

With the inner tube design. It would be possible to bore some holes in the outer tube.

[Tom_Tom]

I’m a Gnu:

Flanders And Swann - The Gnu Song

Or for Brexiteers:

Flanders & Swann

Edit: it has been pointed out to me that some may not get that “The English are best” is sharp irony, first published 1963. Please don’t take it literally.

[ToyKeeper]

@Geuzzz

With the inner tube design. It would be possible to bore some holes in the outer tube.

No. The current design has waterproofing, which is probably not worth sacrificing for some tryptophobia-inducing aesthetic changes.

[Tom_Tom]

@Geuzzz

With the inner tube design. It would be possible to bore some holes in the outer tube.

But why ?

Not a good look, costly, and compromises everything the tube is supposed to do. Bizzare idea.

[pepinfaxera]

Updated list : … Post moved to Page 111 . FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #3305 by pepinfaxera

-

[Henk4U2]

@Geuzzz

With the inner tube design. It would be possible to bore some holes in the outer tube.

Reminds me a bit of the Thorens turntable I bought with money from my first real job. Replaced the original head with a light-weight version. And drilled a lot of vent-holes in it. All in the name of losing weight. The downside was that you needed to stay away when playing a record. Slip-stream, you know. The Thorens was not IP8, of course. But that did not matter, because it was not bought to be an EDC.

[Geuzzz]

I agree it’s not that practical, but I think it just looks so good

[joechina]

Can Andúril do a battery check (and nothing else of the blinkies) in lock out mode?
Would that a good feature?

Joe

[agent80]

Interested

[Sivy]

I fancy one of these, put me on the list please.

[pennzy]

Put me on the list also please. Thanks.

[pepinfaxera]

Updated list : … Post moved to Page 130 , FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public - #3870 by pepinfaxera

Short list, Last requests .
.

[pepinfaxera]

Updated list : … Post moved to Page 111

-