[GB ended, news update only] Last batch of 219B sw45k R9080 and sw40 R9080

Revised:

- sw45k & sw40: 8x USD 2,8 = USD 22,4

- Noctigon 3XP [PO]: 1x USD 3 = USD 3

- Soldering service for 1x Noctigon 3XP [PO] = USD 0,7

  • Economy shipping: 1x USD 5 = USD 5
    ———————————————————————— +
    Total = USD 31,1

USD 0,8 refunded

- Clemence

Update for my order: 4x SW40s + 6x SW45s, grand total $33.

Payment just sent.

Cheers ^:)

Can you reflow them on matching 16mm MCPCB and how much would this cost extra per LED?

Yes I can. For pricing on reflow service you can open and simulate your plan here:
https://www.virence.com/product-page/led-reflow-and-or-soldering-service

- Clemence

Great, would take 10 x sw45k and 10 x sw40.
So 2 x 28$ = 56$
Three of each on Noctigon XP16.
So 6 x 1.85$ = 11.1$ for MCPCB and 6 x 0.5$ = 3$ for reflow service.
Plus 5$ shipping.

Total would be 75.1$ then.

If I did the math correctly I would transfer via Paypal this evening (Europe here).

All = Correct

I’ve made two orders so far, first here and second here. I’m sorry to make my order so complicated, but I’ve decided I need even more SW45k emitters. :slight_smile:

I’ll take 12 more SW45k emitters, two Noctigon 3XP parallel MCPCBs, and two reflow services to load them with 3 LEDs each. $41 sent.

This brings my total order to:

24x SW45k emitters ($67.20)
2x Noctigon 4XP V2 parallel MCPCB ($6)
2x Noctigon 3XP parallel MCPCB ($6)
4x reflow service ($2.80)
international shipping ($5)

I’ve now sent three separate payments, $38.60, $7.40, and $41 = $87.

Thank you again for making these available, clemence. I promise I’m finished adding to my order! :partying_face:

Payment sent.

I would like:

15 x SW45k $42
15 x Noctigon XP16 $27.75
shipping $5
Total = $74.75

Paypal sent, and Thank you!

The sm4070e for 219C (which is listed as out of stock on your site) was from a big company special request like this?
How often can you observe and join to these?

Btw, once I manage to set myself up to do simpler reflow jobs, I will take the opportunity to try as many as possible emitters in different lights :slight_smile: (I will pull the trigger on a hot plate soon, hopefully)

Good morning everyone, will update the listing soon. Still talking to my coffee here.

- Clemence

Payments sent for following order.

Noctigon 3XP Parallel $3
219B-sw40 + 219B-sw45 + 219C-sm573
Noctigon 3XP Parallel $3
2× 219B-sw40 + 1× 219B-sw45
Noctigon 3XP Parallel $3
3× 219B-sw40
Noctigon XP16 $1.85
1× 219B-sw45
4X LED reflow soldering service $2

LEDs for above will used from pool below, rest will be sent as leds.
12X 219B-sw40 $33.6
6X 219B-sw45 $16.8
1x 219C-sm573 $3.5
International economy service: $5
Total $71.75

Payment sent $47.00

10 219b sw40 = 28.00

5 219b sw45 = 14.00

Shipping = 5.00

Total = 47.00

Thanks!

Forgot to put my BLF username in the Paypal comment.

Paid for:
6x sw40
4x sw45
1x VR16S1 MCPCB
1x E21A SM653 R9080

Total: $39.73

Please, sign me for
2x sw40
2x sw45
Intl shipping $5
Total amount: $16.2

PP sent for the above order

Oooh, I see there are E21A with 6500K and R9080. How am I supposed to retain any money at this rate?

I might have to upgrade shipping too so I can get all these goodies quicker!

Update:

I just did it. Order 10226.

So now I'll be getting 3 of the (10) 2000K E21A mounted to boards, and 4 of the (6) 6500K E21A mounted to a quad board.

I upgraded shipping to express so I'll be needing a $5 refund for my previously paid shipping, I'm sorry about that.

The Google spreadsheet correctly lists my order of 24x SW45k emitters and two loaded 4XP MCPCBs, but shows:

2x sw45k soldered on 2x Noctigon 3XP [PO]”

which should read:

6x sw45k soldered on 2x Noctigon 3XP [PO]”

I’m pretty sure you wouldn’t reflow a single emitter onto each of my two triple boards, but just wanted to make sure. :smiley:

Did you mean 3x E21A on a single VR16S1 MCPCB?
I see, you meant 3x E21A 2000K on 3x VR16S1

Yes that’s it, 3x E21A 2000K on 3x VR16S1, one LED per board. Thanks!