✌ FREEME - ASTROLUX MF04S (XHP70.2) & MF04 (XHP35 HI) - BRASS@.@

So about the same as the GT then.

Your not using the peak hold setting are you? I move the sensor around by hand trying to find that brightest area, but I ignore any sudden peak readings.

Select max on lux meters then moving the sensor around to get max reading.

Maybe that explains the 2 different readings you got?

Haha, I noticed my readings are forever on the lower side. You guys can trust me for not publishing exaggerate figures just for the sake of sale.

I got higher value for 15m. Maybe you want to give it a try?

From two different model meters.

Select max on lux meters then moving the sensor around to get max reading.

I will test it at 15 meters and then 20 meters to see what the lux reading will be.

I expressed interest but never received a PM with the code. Can I still get a discount code?

Hi.

Mine arrived today, CW. Works all fine.
Thanks freeme and BG.

@Hardusvd70
You use 3 different luxmeters for your readings comparing different flashlights, could you please reduce that to just one to get a fair comparison? (not saying your readings are wrong, just less accurate like this)

Will do that, busy with that now. I will use the red lux meter for all lights and update.

I got my astrolux mf04 CW today… I shine at the white wall and the beam look great… thank you GB and banggood.

Has anyone had a notification that their NW version has shipped yet?

I’m dead to Banggood. No reply or reaction to anything. :person_facepalming:

I ordered my NW the first of this month. Not shipped yet, but after all I ordered later than most people.

I tested my mf04 CW and got 1930 lumen… I am happy with this light.

I emailed BG asking for an expecting shipping date on my NW ordered 2nd of June and they said expected stock on 19th of July :confused:

They wouldn’t take any chance of making customer angry with a too optimist shipping date, so they stick to the initial delay.

Ordered my second AstroluxMF04. Very happy with its performance.

I wonder if they use low binned emitters. Driver is delivering 2.4A iirc. There is room for at least 10% improvement.