(prototype) the GT Mini

It should be named MT , from Micro or Mini Thrower , compared to GT

“MT” pronounced “empty”? … I think “mini GT” sounds better.

Maybe another word haha ! Little Thrower (LT) maybe :smiley: :smiley: :smiley:

Mini Giga Thrower is kind of ironic

We need this!!! :smiley:

If 18650 is ‘mini’ and 18350 is ‘micro,’ then how about ‘pico’ for the AAA model? :partying_face:

:D

As far as I can tell, that’s the point. Same size and performance as a D1S, but with a different look and feel. Also, an optional 18350 version.

Both can be converted, if you can find or make a clicky-switch tailcap which fits. It’ll also need new firmware. I added dual-switch support to Anduril a while back, which basically just makes it turn on at the memorized level when it gets power (instead of blinking and turning off). So, momentary on the tail switch, brightness and extra modes on the side switch.

… similar to a Mini C8 Mini C8 AAA XM-L U2 Mod. XP-G2 Shots Added. 1.17.13 :wink:

I find it humorous the lengths people are willing to go to in order to make (or not make) a purchase. Especially in flashlights, have to analyze the heck out of it, yet the closet has how many shirts/shoes/slacks/jackets/coats? We buy a new shirt because we like how it looks, think it’ll look good on us, not usually because our closet is bare and we have nothing to wear.

Flashaholics are like that with lights… ooooooooh! I LIKE that one! Where do I sign up? :stuck_out_tongue: (Hmmm, could this be why I have 200 lights?)

I NEEEEEED the 10440 version of the GT! I do, I really really do! :smiley:

Did I read over the information?

In the sign up list you have the choice between CW and NW LED

Are there any information about the colour temperature or the Bin of the LEDs?

What? I need that, where do I sign up?! One nano-GT in titanium please with copper middle section :heart_eyes:

NOW we’re on the same page Jos! :smiley: I’d be on that like a chicken on a June bug!

Sorry if I’ve overseen a regarding post:
is the driver really pressfit or glued?

driver is not final atm

Will it have the same UI as the big GT?

I’d offer firmware, but… if it’s a Mini-GT, for the sake of consistency, it should probably have the same UI as the GT.

Not that your firmware isn’t good (it sure is!!) this ‘mini-GT’ definitely needs the same firmware / UI as the big GT. :heart_eyes:
For the driver, it needs something like the LD drivers from ledforpower. Very nice CC controlled (no pwm!) lower modes and a possible DD or FET like high / turbo mode for ultimate performance.

This mini version looks great! Though it could be a little bit bigger. :smiling_imp:
Really love that it has the same looks as the big version. But the fins could have been a little bit smaller and one extra wouldn’t hurt. (as with the big one :sunglasses: )

I like it that flashlights are starting to use the 21700 cells but an 18650 version makes still sense.

Is there any idea of runtimes on high/turbo? Will it have a step down? I’m always frustrated by specs based on short turbo modes, the real assessment should be lumen/lux at 10min mark