Mmmkay AEDe, add another bunch of 10x LH351Bs in my name. 
Cheers :-)
Can’t say I’m ready for a “one light to rule them all” build. Maybe someday (but NOT Sunday)! :laughing: Thanks for the laugh Barkuti! I can assume that 2 Q8’s, 3 BFL A6’s, a Sofirm C8F triple (and additional C8F host in the mail) will end up looking much better with the LH351Ds as they all are built for XPL’s. Even if I decide on something else for the C8F, I may just end up replacing the 5000k emiters that will probably end up going into the BFL lantern project with 4000k (I should have probably voted in that poll). I have no idea what I’m going to do with 50 LH351Bs. :person_facepalming: Love, Peace & Chicken Grease!
I love my LH351D…
Put me down for 10 please
Add me for another 6 of LH351D 90cri please 
Done
If it’s not too late to be added to the list, I’d like 9x of the 351D 4000K 90cri. Thank you!
i want 10 lh351D 90+ CRI, thank you
I would like 3 LH351D 4000K 90cri please.
Anyone have any lumen numbers on these? Wondering how they will do in a Q8. If available I am thinking about buying some to offer as mods for Q8 owners.
I take it that 4500k 90CRI is not as option?
fully modded w/ stock LEDs:
XP-L V6 3D
0s: 6,369lm | 30s: 5,774lm
fully modded w/ LH351D 4000K 90CRI:
LH351D 4000K 90CRI
0s: 5,095lm | 30s: 4,687lm
These numbers were adjusted to be in line with Djozz-lumens
What do you mean fully modded?
With a spring bypass and everything?
@Texas Ace, no sorry. There is not a 4500k option that you have to order less than 800pcs, but there is a 5000k option.
In fact, I have gathered a list of all the LH351D 90CRI that I have found that you can order in single quantities.
Here is 5000k 90+CRI:
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SPHWH…
Here is 4000k 90+CRI:
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SPHWH…
Here is 3500k 90+CRI:
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SPHWH…
2700k 90+CRI:
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SPHWH…
Spring bypass and screws replaced using 30Q button tops
That is expected from 90CRI+ LEDs.
Pushing 1000 lumens+ out of these LEDs is amazing though. They are still 30% better than equivalent Nichia 219C LEDs.
Just replying to TA. I like this LED in all floody lights tbh
interested in 10x 3000K 90CRI LH351b
Thanks for the info, impressive numbers for a 90cri LED.
I am sure there have been beamshots posted but does anyone know where they are in this thread?
Links don’t work sadly.
Hmm, I just might get a combo of 4000k and 5000k and make my own 4500k setup!
Is this Group buy still open? Or do we have to buy then from digikey now? I didn’t see a recent update in the op and have not had time to read BLF outside of my own threads this whole year.
How much floodier are they then the XP-L? IIRC the die size was about the same?
What as the results of slicing / dedoming?
It is a bit floodier than the XPL.
Dedoming(slicing) actually works quite well.
Yes It is open. There was a delay at the supplier. But I finally got them today.