BLF Interest list for Very High Current Beryllium Copper springs Pt1(ENDED)

Increase to 30 small, 50 big, please

Interested in 50 each of both sizes.

List updated again.

Once we get close to the 2000 spring mark, I think I will pause the big spring group buy, and let the small springs go up to 2000pcs too.

This is getting a bit too big for my taste :laughing:

Once I get the samples and test them for the electrical properties, but most importantly, the mechanical properties and see that they are good, I will reveal the final price details.

And as said before, if all goes well with the group buy, I’ll ping Richard and ASF so you can get these springs all

Not really, Mtn is good for the americans but for getting just a few springs the shipping to the rest of the world is too high.

If there is a worldwide need for these springs it is possible I could hook us up with a China distributor if needed. That is of course if BlueSword wants that.

Thanks Texas Ace. No problem with that. I have learned a lot about contacts, springs, and this really helped me along the way.

And so, pinging a Chinese distributor too like Kaidomain/Fasttech/Banggood would be great to get these springs to everybody once the group buy is done

You could also ping Lumintop to put my springs inside of the new XHP70.2 GT project haha. That would be helpful to push the XHP70.2 to its limits, or even do triples/quads inside if that is even possible in such a light.

List has been updated on the OP too.

Agreed, there are plenty of nice things that I would like to buy from the US, it’s great engineers and entrepreneurs, but it’s pointless. Shipping and duty just make it stupid.

And it’s going to get far worse if the POTUS carries on with his madness and tries to pull up the drawer bridges. (Oops, please disregard, that might sound like politics). Making a comfy little short-term bubble for his uneducated electorate and big business chums, second term on his mind, meanwhile going to hell in a handbasket.

Get them made anywhere but in the US and shipped direct. It’s just a spring, not complicated, plenty of manufacturers could do it.

Even Harley Davidson understand this, and are reacting sensibly.

Free Trade.

Rant over.

Yeah. A Chinese distributor would be the best bet for international shipping and purchases.

I just pointed to MtnElectronics and ASF so the US guys could get them quickly while not waiting for the Chinese slow boat.
And since even if you were to buy 5000 springs at a time, the amount would be lower than 800$US, so it would not be subjected to the stupid new 25% tax.

I will put out some feelers and see what happens.

I’m really trying to understand what your saying here and don’t really want this to be polictical but It looks like this is contradicting yourself.
You can ship a item from china to the US and cost the buyer nothing and most all other parts of the world. Once the item reaches the US port the united states postal service has to deliver this item to the buyer, its a great deal for the buyer and seller. If Mtn Electronics ships this same item to you (another country) the cost is to high and makes it unreasonable (No Sale, you buy else where). :person_facepalming: The united states postal service takes the item to the same port the china goods came from so no difference in cost for the united states postal service. So how is this fair to Mtn Electronics.
Maybe I’m missing something here, I thought this was what all the fuss was about having fair trade. :frowning:
I hope somebody does something because it sure doesn’t seem fair to me.

One simple question Tom Tom…. Why do you insist on making political posts & comments when it is clearly against the rules??? As you surely must know by now….

Do you feel the Forum Rules are beneath you & you need not comply??

No, it’s actually ALMOST relevant to this discussion.

The taxes on electronics products only apply to orders outside of the US when importing more than 800$US of products/components, which is 25%.

Since even with 2000 big springs, and 2000 small springs, it will only cost 650$ in total, and so we aren’t affected.

It’s mainly distributors like Digikey, Arrow, and Mouser which will get affected by this.

What I post is factual (with a bit of discussion).

Fact is that the US is ploughing a path to nowhere.

In the case of e.g Harley, read this and weep:

It’s a big wide world out here, and if the USA ceased to exist we’d be stuffed, for a short while. Nearly saw that when Lehman Brothers collapsed and Merrill Lynch were found out. And the ongoing consequences. Nevermind Enron. Could happen again, confidence is everything until it changes.

But lets back out now, this thread is about springs, of which you Teacher have no specific knowledge to contribute, though are very vocal in all sorts of threads. Consider that a slap-down.

BLF Rules:
BY REGISTERING AN ACCOUNT YOU ALREADY IMPLICITLY AGREED TO ABIDE BY THESE RULES:
Please don’t be rude. Rude people will have their accounts deleted.
Please don’t use dirty language, please don’t swear, and please avoid lewd or risqué conversations.
Please avoid controversial or divisive subjects such as religion and politics.
Please avoid fighting. If you or somebody else is losing their calm, please drop the subject.
Please don’t even think about spamming this forum. Spammers will be prosecuted.
Please don’t even think about using this forum for illegal activities. Criminals will be prosecuted.
By registering an account, you agree to the BudgetLightForum.com Privacy Policy.
All opinions expressed by users of this website may or may not be accurate, and as such BudgetLightForum.com does not officially endorse them. BudgetLightForum.com does not encourage risky behavior, and will not be responsible for physical, emotional, financial or other damages resulting from the use or misuse of any information or misinformation expressed herein. All users are encouraged to use good judgement before making any physical, financial or other decisions based on the information or misinformation expressed on BudgetLightForum.com.
Have fun.

On the spreadsheet I’m #25 richnpc, 20 big, 10 small. Could I add 10 big, and 10 small, for a total of 30 big, 20 small?

:smiley: …… A “slap down” from you Tom Tom… by way of keyboard. Surely you jest. :smiley:

But you avoided answering the question & just interjected more of your political rhetoric & opinions.

And, one way or another; you have made your ’superior intellect’ very plain in most every thread you post in…… which are many also. I applaude you for being of such high intelligence.

I, on the other hand; am just doing the best I can with the limited IQ I have. Oh well… such is life. :wink:

But back to that one simple question. Why do you seem to think it is OK for you to post your rhetoric & opinions that are of a political nature??
You do it fairly often…. and by now surely you must know it is against BLF RULES.

Kaidomain and FastTech come to my mind. PM BanL to see if he's interested.

Cheers ^:)

[Quote=BlueSwordM]…

Big spring vs Fasttech Carobronze measurements

Height: 12mm vs 10mm

Top diamater: 4mm vs 7mm

Bottom diameter: 7mm vs 9mm

Wire diameter: 0,8mm vs 1mm

… [/quote]

That looks a little bit messed, better replace with this:

Big spring vs small spring (FastTech Carobronze size) measurements:

Height: 12mm vs 10mm

Top diameter: 7mm vs 4mm

Bottom diameter: 9mm vs 7mm

Wire diameter: 1mm vs 0.8mm

Cheers ^:)

First off, thanks Barkuti!

Second, I may have a slight problem.

You see, the company which I was going to pay for the samples originally, boosted the price a… bit.

It went for 100$US+shipping, to 135$US+shipping, so quite a bit more expensive.

This is getting quite annoying, and expensive just for some spring samples.

I think I’ll just take the risk, and go with my original plan of just buying the 2000 springs from my original manufacturer, since while the prices are the same from both sellers using BeCu C17530, the one I was going to go with is being just absurd with the samples cost.

Since this is my hobby money, I’m willing to take a risk.

Edit: I’m just going to keep looking for a supplier that is willing to even get 1 spring sample.

And besides, I have Paypal to protect just in case something goes horribly wrong, like springs not being made of BeCu C17530, which is quite easy to test just by its electrical properties.

:person_facepalming: