(prototype) the GT Mini

LED Flashlights – General Info 18650 Flashlights
339

First of all… PLEASE go back to your post & resize your picture. :wink:

I totally agree with what you say…. the GT Mini logo should be in the same place as the original GT.
BUT, if it has to be on the battery tube flat; the one in this picture looks a thousand times better than what was presented this morning.
As far as I am concerned anyway.

I wonder who comes up with this stuff?? :person_facepalming:

And while we’re at it. I wish more companies would take a tip from SOFIRN & offer a much truer neutral white tint.

The choices here are 4000K & 6500K. Basically ’Urine Yellow’ & ’Harsh Blue’… :person_facepalming:

True Neutral White has been left out & we are left with two crappy choices that both add a lot of color.

And glue the driver in??? Why?? . :open_mouth: . :person_facepalming:

My opinions… yours may vary.

340

The Lumintop/Bunny logo is probably on one side, GT mini on the other. :wink:

Ordered. :smiley:

Thanks Martin, thanks Neal, thanks Lumintop, thanks Samsung :smiley:

341

M4DM4X…… In the video you did about the GT Mini, was it the 4000K or 6500K emitter??

Which ever it was is what I want to go with. :slight_smile:

342

Yep, I was suggesting Lumintop simply skip the ‘GT mini’ engraving on the other side. :+1:

343

order placed

344

Probably already done at this point, to be honest… they’re planning on starting shipping next week so the lights are probably already made.

345

Well… if that’s the case…… I retract my displeasure. I can live with that…. :smiley:

The rest of my above post about tint & glue remains intact. :wink:

346

Yep…. most likely. What tint did you get Dale, 6500K ??

347

Ordered NW+short tube+18350 batteries

348

Man that sucks about the engraving on the side. That text is really awful. And now realizing the driver is glued in…

I said I was interested in 2, but I’m only ordering 1. Hopefully the NW tint isn’t too yellow.

349

I think I got the cw

350

Teacher, can you confirm where you saw these emitter tints at? I can’t seem to find them in any of the threads or reviews.

Does anyone know what emitter bin comes in it?

351

I ordered CW but of course I’ll change it… :wink:

I will, at the very least, change the emitter and flash Anduril to the driver… I might end up putting an XHP-35 in it, who knows?

352

If the long tube can take it, I’ll probably bore it for a 20700 or 21700, depending of course if it can take either. I have a couple of XP-L HI V3 3A bare emitters and some boards, might even slice an Samsung LH351D like I did yesterday. I’ll figure it out, one way or 3 others…

(Edit: Come to think on it, I DO have another SBT-70 left over…. :wink: )

353

Thanks Martin, that looked pretty good on your video. I’ll go with that…… :beer:

354

placed my order for 1 NW GT-Mni :slight_smile:

355

Here ya’ go my friend. It was from M4DM4X. No idea about bin.

356

Thanks Teacher! Looks like I will try the CW emitter.

357

Thanks Dale…… :beer:
Let us know how hard it is go get the glued in driver out too… :open_mouth: . :wink:
Hopefully the bezel & battery tube will not be glued. :person_facepalming: . :smiley:

358

My pleasure Yourrid! That is what I am going with also.

Martin says he thinks that is what he had in the Prototype when he made the GT Mini video.