(prototype) the GT Mini

Yep, I was suggesting Lumintop simply skip the ‘GT mini’ engraving on the other side. :+1:

order placed

Probably already done at this point, to be honest… they’re planning on starting shipping next week so the lights are probably already made.

Well… if that’s the case…… I retract my displeasure. I can live with that…. :smiley:

The rest of my above post about tint & glue remains intact. :wink:

Yep…. most likely. What tint did you get Dale, 6500K ??

Ordered NW+short tube+18350 batteries

Man that sucks about the engraving on the side. That text is really awful. And now realizing the driver is glued in…

I said I was interested in 2, but I’m only ordering 1. Hopefully the NW tint isn’t too yellow.

I think I got the cw

Teacher, can you confirm where you saw these emitter tints at? I can’t seem to find them in any of the threads or reviews.

Does anyone know what emitter bin comes in it?

I ordered CW but of course I’ll change it… :wink:

I will, at the very least, change the emitter and flash Anduril to the driver… I might end up putting an XHP-35 in it, who knows?

If the long tube can take it, I’ll probably bore it for a 20700 or 21700, depending of course if it can take either. I have a couple of XP-L HI V3 3A bare emitters and some boards, might even slice an Samsung LH351D like I did yesterday. I’ll figure it out, one way or 3 others…

(Edit: Come to think on it, I DO have another SBT-70 left over…. :wink: )

Thanks Martin, that looked pretty good on your video. I’ll go with that…… :beer:

placed my order for 1 NW GT-Mni :slight_smile:

Here ya’ go my friend. It was from M4DM4X. No idea about bin.

Thanks Teacher! Looks like I will try the CW emitter.

Thanks Dale…… :beer:
Let us know how hard it is go get the glued in driver out too… :open_mouth: . :wink:
Hopefully the bezel & battery tube will not be glued. :person_facepalming: . :smiley:

My pleasure Yourrid! That is what I am going with also.

Martin says he thinks that is what he had in the Prototype when he made the GT Mini video.

Interested

You need to fill out the form in the first post of this thread to sign up.

Member M4DM4X will then share details via email on how to order.

He started sending out purchase details today, and we’ve been ordering lights. Go sign up! :slight_smile:

Does anyone have details about the driver, like the circuit design and ideally also source code? If it’s using NarsilM, there should be code for the GT-Mini version available since it’s a derivative work of a GPL-licensed project.

Code would be the most helpful thing for getting Anduril to run on it. An actual working unit with an unglued driver would help too, but probably isn’t necessary if there is reference code.