Withdrawn, Copper AAA Maratac w Nichia, sealed in foil, mint

Thanks so much, I might as well try it. :slight_smile:

lucydog…
Thank you for posting this clarification.
It’s just hard to justify my reply when it’s gone.
Yeah, it appears that the e/switch can not support the 10440 battery.
The Tool is a great light and I carry one in two of my outdoor grab hoodies.

I got my e-switch version today and was initially putoff by the UI. “5 clicks to high??? Awe, h*ll no!” Yet it’s the one I’ve reached for throughout the day because it is one-handed and quick. I like it a lot, and I expect to like the reverse-click version even more.

I’m sorry for derailing this post, didn’t meant to.
Carry-on….

good catch!

heres the feature/bug skinny
the eSwitch Tools on 10440 are high mode only until the battery drops to 3.8volts

massdrop aluminum tool is eSwitch, so 10440 feature/bug applies

there is also an aluminum Tool w Nichia and Mechanical switch, it does work with 10440, but bear in mind there is no overdischarge protection built into the light

same for Maratac… no OD protection, and unsanctioned to use 10440, but people do…

Im a LiIon newbie, hung up on using protection in case I fall asleep with the light on

Hmmmm, now I’ll be researching whether my k18 has a protected circuit. As far as Li-Ion, the IMR’s are fairly safe - and you can always use a protected battery (if it fits). I use 18650’s, don’t so much see the appeal of the 10440’s over the longer running lithium primaries, except for the pocket rocket WOW factor. I prefer the CR123 size for more power in a small package. Years ago I used a mechanical ecig that took 10440’s, lasted about 3 hours between charges!

In case anyone cares, and since this thread is all over the place anyway :smiley: the 2017 version of the k18 does have OD protection:

http://www.ultratac.com/faq-items/does-the-k18-have-over-discharge-protection-for-10440-batteries/

so this is the rev. 4 model?

I do not know the Rev Number, there are no markings on the packaging to indicate Rev Number. But if I had to guess, I would say yes.

What makes you ask?

Maybe contact Countycomm to ask what Rev they were selling in December 2017, and share what you learn.

sorry to tell you, but i can’t remember why i asked, now. i also don’t remember what i had for breakfast, and it’s currently lunchtime

lol
I think you wanted to figure out if it is Rev4 (it probably IS), because you assume, as I do, that they started using N219c in Rev5, and like me, you know the N219b is better, less green.

and, Yes,
I remember you want to buy my Maratac :wink:
dont forget to send the money

…it’s starting to come back to me

i’ve got about 10 of them now, and i think that’s being conservative. 4 copper, 4 titanium, 4 black aluminum, and that doesn’t include the worms

sooooo are those Rev 4?

and Got Nichia?:slight_smile:

i know 2 have nichia and…ooohhh, pretty butterfly…

where was i?

better yet, who am i?

Now I do not know whether I was then a man dreaming I was a butterfly, or whether I am now a butterfly, dreaming I am a man

∆ and/or:

Which side of the aquarium glass am I on ?

How many sides are there…

A man went to sleep and had a dream he was a Copper Maratac, when he woke up he did not know if he was a Copper Maratac dreaming he was a man, or a man selling a Copper Maratac.

A man named jon went to sleep and had a dream and was blinking his eyes real fast and didn’t know if he had PWM or not :slight_smile:

Then PWMWarrior awoke with a start and Shouted out in High CRI

NO! None of my Maratacs have PWM!

and a great battle ensued, in which the maiden was saved, and PWMWarrior lived happily ever after.

bump before withdrawing this sale

ok, withdrawn